This will ensure a logically new buffer does not keep flags from
a previous use of that buffer (eg, DISCONT would be set on the first
buffer, and mistakenly kept when reused).
https://bugzilla.gnome.org/show_bug.cgi?id=653709
Some drivers are buggy are will change the current format when
processing VIDIOC_TRY_FMT. Save and restore the current format
to ensure the format is kept unchanged.
https://bugzilla.gnome.org/show_bug.cgi?id=649067
Use the fraction compare utility to compare function, not the
handcrafted one. The handcrafted one is buggy as it doesn't take into
account rounding error. For example comparing a framerate of 20/1 on a
camera configured as 30/1 fps would yield true: 1 == (1 * 20)/30 and not
re-configure the camera. Fixes#656104
When nobody is using our pool, activate it ourselves.
Avoid leaking the buffer array.
Set default pool configuration with caps.
Don't keep current_caps, core does that for us now.
Use the more specialized type for the bufferpool.
Use the size from the driver as the size of the image to read.
Don't configure the pool when created. This will be done in the setup_allocation
method later or by upstream for sinks.
Remove unused properties and variables. Bufferpool sizes are now configured in
the bufferpool by the elements in the pipeline. We might want to influence the
pool size later somehow.
Prefer to always use the default bufferpool queue for the _acquire function
because it properly supports unblocking when setting inactive etc. As a result,
we need to dequeue buffers and put them back in the bufferpool queue when we
have queued all buffers in the sink.
Rename some variables to more meaningfull names to avoid a problem with
freeing the wrong amount of buffers.
Remove old method, use neww _process method for the sink.
Inform the parent bufferpool class about the settings too. This is needed to let
it know about the max-buffers.
Allocate the negotiated max-buffers and initially mmap min-buffers. The idea is
that the bufferpool will allocate more when needed.
Improve debugging.
Only poll in capture mode, it does not seem to work in playback mode on this
beagleboard.
Add different transport methods to the bufferpool (MMAP and READ/WRITE)
Do more parsing of the bufferpool config.
Start and stop streaming based on the bufferpool state.
Make separate methods for getting a buffer from the pool and filling it with
data. This allows us to fill buffers from other pools too. Either use copy or
read to fill up the target buffers.
Add property to force a transfer mode in v4l2src.
Increase default number of buffers to 4.
Negotiate bufferpool and its properties in v4l2src.
Pass the caps and the default video size to the bufferpool config.
Don't activate the bufferpool, this will be done by the object that decides to
use the bufferpool.
Improve debugging and error reporting.
When we have all buffers queued for playback and we need a new empty buffer,
dequeue one and return it.
Set the right size for sink buffers.
Improve counting of queued buffers.
Extend from GstBufferPool.
Handle the lifetime of the pool buffers correctly with the start/stop vmethods.
Map acquire and release directly to QBUF and DQBUF. We still expose an explicit
qbuf for the v4l2sink for now.
Move the details of how to capture to the device object. Remove the
v4l2src_calls.[ch] files because they are empty now.
Provide two simple methods to get and return a buffer to the device.
Also do a slow copy when the buffer is not from our pool.
Rename start and stop methods to open and close because that is what they do.
After setting the format on the device object, setup the bufferpools. Move this
code from the v4l2src_calls.c file, it is shared between source and sink.
Make new device start and stop method that merges various bits of common code
spread over several files.
We want to keep the default strides in the videoinfo. Keep the stride of the
video frames separate so that we can use both to copy a video frame and do
correct stride conversion.
Use GstVideoInfo to store the parsed caps.
Remove outsize from the caps parsing code, it's wrong because it does not use
the stride given by the driver.
Move the configuration of the framerate to where we set the other format
parameters.
Remove hack to check if the device is active.
Store streamparm in the device info.
Use some macros to access the current device configuration.
Remove some duplicate fields in src and sink and use the device configuration
instead.
Pass the caps to the set_format function and make _set_format parse the caps.
Also keep the parsed values in the v4l2object so that we can refer to them when
we want.
Keep track of the currently configured format and setting in the
v4l2object.
Pass the v4l2object to the bufferpool constructor so that the bufferpool can
know everything about the currently configured settings. This also allows us
to remove some awkward code.
Create a new pool in setcaps and stop/destroy the old one.
Remove buffer_alloc functions.
Check that we have v4l2 metadata in show_frame and fall back to memcpy into a
buffer from our pool if we don't receive one of our own buffers.
Various cleanups, avoids useless casts, move error handling outside of the main
code flow.
Negotiate to a resonable resolution instead of the max resolution.
Pretending to handle 8-bit signed causes distorted audio when
actually given such audio, which you will get if passing 8-bit
unsigned through audioconvert ! audioresample, as audioresample
only handles 8-bit signed. Fixes#605834.
Signed-off-by: David Schleef <ds@schleef.org>
Based on a patch by Guennadi Liakhovetski.
v2: updates because I forgot to add GstTuner interface to v4l2sink
v3: update to add all possible values to norm enum
GCC 4.6.x complains about such variable usage. Unused but set variables
were removed except that gst_oss4_mixer_slider_set_mute () now returns
the value from the call to gst_oss4_mixer_set_control_val ().
Commit 6c8268dbfd broke recording
from interlaced v4l2 source (e.g. typical tv capture card) since
V4L2_FIELD_SEQ_TB (with fields stored separately) does not map
to currently defined interlaced format (fields stored interleaved).
Besides this mismatch, hardware might quite likely not support or
appreciate this field value, since querying supported formats mapped
_INTERLACED field formats to interlaced=true caps (so the latter should
not be mapped to field value that is not known to be supported).
gstdirectsoundsink.c: In function 'gst_directsound_sink_write':
gstdirectsoundsink.c:557: error: implicit declaration of function '_swab'
gstdirectsoundsink.c:557: error: nested extern declaration of '_swab'
Older kernels don't have these, and there's no easy way to check for the
existance of enums that doesn't involve a configure check, so just define
these if the V4L2_CAP_VIDEO_OUTPUT_OVERLAY define is not there, which was
added in the same commit as the TB/BT enum. Fixes compilation on CentOS 5.
https://bugzilla.gnome.org/show_bug.cgi?id=639339
These macros will expand to NOOPs given the right defines. Also,
g_return_if_fail() and friends are meant to be used to catch programming
errors (like invalid input to functions), not runtime error handling.
Looks like this got enabled by accident when adding it to v4l2sink,
so undo this for now. Not sure it makes much sense in a GStreamer
context with current hardware.
This reverts commit 9e1d419d07.
Reverting this since it adds unreviewed and bad API to v4l2src
(property of type enum, with seemingly random and unsorted values).
output devices should use get/set output, and in either case we should
not print a warning message if the ioctl fails but the device does not
claim to support the tuner interface
If xoverlay is available, v4l2sink should create a window for the overlay to
display in.
The window automatically tries to make itself as large as possible.
This works well on a small screen, but perhaps should first attempt to use
the size of the video that is played (no scaling).
Special case check for sub-buffers: In certain cases, places like
GstBaseTransform, which might check that the buffer is writable before copying
metadata, timestamp, and such, will find that the buffer has more than one
reference to it. In these cases, they will create a sub-buffer with an offset=0
and length equal to the original buffer size.
This could happen in two scenarios: (1) a tee in the pipeline, and (2) because
the refcnt is incremented in gst_mini_object_free() before the finalize function
is called, and decremented after it returns.. but returning this buffer to the
buffer pool in the finalize function, could wake up a thread blocked in
_buffer_alloc() which could run and get a buffer w/ refcnt==2 before the thread
originally unref'ing the buffer returns from finalize function and decrements
the refcnt back to 1!
This is related to issue #545501
The size of the buffer would be zero'd out in gst_v4l2_buffer_finalize()
after the buffer is qbuf'd or pushed onto the queue of available buffers..
leaving a race condition where the thread waiting for the buffer could awake
and set back a valid size before the finalizing thread zeros out the length.
This would result that the newly allocated buffer has length of zero.
When v4l2sink goes to PAUSED->READY it only stops streaming, so the state
should be set to STATE_PENDING_STREAMON in case the element transitions
back to PLAYING.
We'd prefer to throttle the decoder if we run out of buffers, to keep a bound
on memory usage. Also, for OMAP4 it is a requirement of the decoder to not
alternate between memory alloced by the display driver and malloc'd userspace
memory.
note: this really only affects v4l2sink since gst_v4l2_buffer_pool_get() is
only called once per buffer in the v4l2src case (in
gst_v4l2src_buffer_pool_activate())
Most v4l2 drivers will get upset when you queue the same buffer twice in a
row without first dequeueing it.
Rendering of pre-roll buffers can be re-introduced later, but will require
tracking the state of the buffer, and avoiding to re-QBUF if the buffer has
already been passed to the driver.
When the decoder is using pad_alloc(), v4l2sink would behave badly if
the number of buffers ('queue-size' property) was not high enough to
account for all the buffers needed by the decoder, and other elements
(such as queues) between the decoder and v4l2sink. This patch
slightly increases the default number of buffers, and changes v4l2sink
to drop frames rather than return an error in case the number of
buffers is not high enough.
ximagesrc: fix various width/height calculations being off by one,
and make it so a single pixel width/height can be captured (except
the top left one, as 0,0,0,0 is reserved for full screen as per
the property comments).
with i686-apple-darwin10-gcc-4.2.1:
gstv4l2object.c: In function 'gst_v4l2_object_get_nearest_size':
gstv4l2object.c:1988: warning: format '%u' expects type 'unsigned int', but argument 12 has type 'gint *'
gstv4l2object.c:1988: warning: format '%u' expects type 'unsigned int', but argument 13 has type 'gint *'
it's perfectly ok for a video output device to not have overlay capabilities.
this patch removes the need to get/set the overlay parameters if the user
does not explicitely request one of the overlay properties
MPEG doesn't have a static size per frame, so don't pretend it has one
and fail when capturing because it doesn't match. Instead mark the size
as unknown and let the read frame grabbing method use a reasonable fallback
value (assuming that's only for actual streaming formats)
Fixes bug #628349.
The format list should be sorted from high ranks to low ranks. In the GSList
sorting function this means the compare needs to return a positive value if
format a has a lower rank than format b.
Among other things this fixes v4l2src to prefer non-emulated formats
to emulated formats when built against libv4l.
In the case we change the State from READY_TO_NULL the buffers in the pool
still hold an open dup file descriptor to the device, therefore the device
release function will not be called and the device will probably answer with
-EBUSY when we reopen it in the next NULL_TO_READY transition.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
See bug #622500 and #612244.
This allows set_caps to succeed if caps change in a way that
would not modify the format we're getting from the hardware.
Otherwise if not in NULL state, setting caps would fail
with EBUSY.
With this change, in some cases it's OK to go PLAYING->READY->PLAYING
rather than PLAYING->NULL->PLAYING to avoid a time-consuming close
and reopen of the device.
Fixes#621723
Fixes#621723 (partially)
set_caps can fail if the video device is running, in that case
setting its format leads to EBUSY.
If set_caps fails then we will not have set up the buffer pool
(it will be NULL) which leads to a crash when we try to pull
buffers. If we fail the negotiate on set_caps failure, then we
won't go to playing state and won't crash.
This is a small improvement. Of course, a nicer fix would
be to make set_caps work in the case where the format is
unchanged. If the format has changed, failing is
probably correct because we need to close the device
(go to NULL state) in order to set caps.
"Low" etc. are quality settings here (e.g. for the internal resampler).
Some day when we use GLib's i18n functions we might want to use
NC_() and g_dpgettext2() here instead of the comments.
Fixes#555967.
OSS4 supports per-stream volume control, so expose this using the right
API, so that playbin2 and applications like totem can make use of it
(instead of using a volume element for volume control).
Fixes#614305.
When iterating the formats table, we can just pass the whole
entry to our helper function, which avoids iterating the table
again to find the entry structure from the passed format id.
Also accept formats that are not natively supported by the
hardware, OSS4 can convert them internally. List the native
formats first in the caps though, to express our preference
for the native formats. We need this in order to support the
case properly where the audio hardware supports only e.g.
little endian PCM, but the host is big endian, since many
audio elements only support native endianness and make the
reasonable assumption that any audiosink will be able to
handle audio in native endianness.
Based on patch by Jerry Tan <jerry.tan@sun.com>
Fixes#614317.
A side effect is that it passes -Wformat-nonliteral and doesn't read
invalid memory in some cases, like when the mixer track contains
a % sign or there is a number but not a known mixer name.
Code cleanups, general improvements, support for the
new mixer flags in latest gst-plugins-base.
Fixes: #584252
Patch By: Brian Cameron <brian.cameron@sun.com>
Patch By: Garrett D'Amore <garrett.damore@sun.com>
Original commit message from CVS:
* sys/oss4/oss4-mixer.c:
* sys/oss4/oss4-sink.c:
* sys/oss4/oss4-source.c:
Add some spaces in translateable strings.
Fixes: #555969#555968#555965
Original commit message from CVS:
Patch by: Frederic Crozat <fcrozat@mandriva.org>
* ext/sndfile/gstsf.c: (plugin_init):
* sys/dvb/gstdvbsrc.c: (gst_dvbsrc_plugin_init):
* sys/oss4/oss4-audio.c: (plugin_init):
Make sure gettext returns translations in UTF-8 encoding rather
than in the current locale encoding (#546822).
Original commit message from CVS:
* ext/dc1394/gstdc1394.c:
* ext/ivorbis/vorbisdec.c:
* ext/jack/gstjackaudiosink.c:
* ext/metadata/gstmetadatademux.c:
* ext/mythtv/gstmythtvsrc.c:
* ext/theora/theoradec.c:
* gst-libs/gst/app/gstappsink.c:
* gst/bayer/gstbayer2rgb.c:
* gst/deinterlace/gstdeinterlace.c:
* gst/rawparse/gstaudioparse.c:
* gst/rawparse/gstvideoparse.c:
* gst/rtpmanager/gstrtpbin.c:
* gst/rtpmanager/gstrtpclient.c:
* gst/rtpmanager/gstrtpjitterbuffer.c:
* gst/rtpmanager/gstrtpptdemux.c:
* gst/rtpmanager/gstrtpsession.c:
* gst/rtpmanager/gstrtpssrcdemux.c:
* gst/selector/gstinputselector.c:
* gst/selector/gstoutputselector.c:
* gst/videosignal/gstvideoanalyse.c:
* gst/videosignal/gstvideodetect.c:
* gst/videosignal/gstvideomark.c:
* sys/oss4/oss4-mixer.c:
* sys/oss4/oss4-sink.c:
* sys/oss4/oss4-source.c:
Do not use short_description in section docs for elements. We extract
them from element details and there will be warnings if they differ.
Also fixing up the ChangeLog order.
Original commit message from CVS:
* sys/oss4/oss4-mixer.c: (gst_oss4_mixer_open):
* sys/oss4/oss4-property-probe.c:
(gst_oss4_property_probe_find_device_name),
(gst_oss4_property_probe_find_device_name_nofd):
* sys/oss4/oss4-property-probe.h:
* sys/oss4/oss4-sink.c: (gst_oss4_sink_get_property):
* sys/oss4/oss4-source.c: (gst_oss4_source_get_property):
Make device-name probing in NULL state work better (e.g. for the
gnome-control-center sound capplet).
Original commit message from CVS:
Based on patch by: Clive Wright <clive_wright ntlworld com>
* sys/oss4/oss4-mixer-slider.c: (gst_oss4_mixer_slider_unpack_volume):
Apparently mono sliders have the mono value repeated in the upper bits,
so mask those out when reading them. Probably makes the mixer applet
work properly in some more cases.
Instead of using BaseSrc default format GST_FORMAT_BYTES, send it in
GST_FORMAT_TIME.
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Fixes#611659
