The src caps of the libde265 is now fixed to I420, and so if the
stream is other format, such as 4:4:4 or 10 bits format, the pipeline
will crash because the dowstream element accesses the video buffer as
I420 format.
We now restrain the input caps to "main" profile, which only contains
4:2:0 8 bits stream.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5596>
When decoding stream using hardware V4L2 decoder element, in any of the
currently supported formats, the decoding will fail once frame number
1000000 is reached. The reported error clearly indicates a wrap-around
occured, instead of receiving decoded frame 1000000, frame 0 is received
from the hardware V4L2 decoder driver.
The problem is actually not in the driver itself, but rather in gstreamer,
which uses `struct v4l2_buffer` member `.timestamp` in a special way. The
timestamp of buffers with encoded data added to the SINK (input) queue of
the driver is copied by the driver into matching buffers with decoded data
added to the SOURCE (output) queue of the driver. In fact, the timestamp
is not a timestamp at all, but rather in this special case, only part of
it is used as an incrementing frame counter.
The `.timestamp` is of type `struct timeval`, which is defined in
`sys/time.h` [1]. Only the `tv_usec` member of this structure is used
for the incrementing frame counter. However, suseconds_t tv_usec [2]
may be limited to range [-1, 1000000]:
"
[XSI] The type suseconds_t shall be a signed integer type capable of
storing values at least in the range [-1, 1000000].
"
Therefore, once frame 1000000 is reached, a rollover occurs and decoding
fails.
Fix this by using both `struct timeval` members, `.tv_sec` and `.tv_usec`
with matching modular arithmetic, this way the failure would occur again
just short of 2^84 frames, which should be plenty.
[1] https://pubs.opengroup.org/onlinepubs/9699919799/basedefs/sys_time.h.html
[2] https://pubs.opengroup.org/onlinepubs/9699919799/basedefs/sys_types.h.html
A test case using stateless hardware h264 decoder, the WARN/ERROR output
in gstreamer log indicates a failure occurred. With this change, that
error no longer occurs and the WARN/ERROR are not present:
```
pc$ gst-launch-1.0 videotestsrc num-buffers=1001001 pattern=6 ! \
video/x-raw,width=16,height=16,format=I420 ! \
x264enc ! filesink location=/tmp/test.h264
dut$ GST_DEBUG="*:3" gst-launch-1.0 filesrc location=/tmp/test.h264 ! \
h264parse ! v4l2slh264dec ! fakesink
...
0:03:51.393677606 12111 0x370df400 WARN \
v4l2codecs-decoder gstv4l2decoder.c:1157:gst_v4l2_request_set_done:<v4l2decoder2> \
Requested frame 1000000, but driver returned frame 0.
0:03:51.394140597 12111 0x370df400 WARN \
v4l2codecs-decoder gstv4l2decoder.c:1157:gst_v4l2_request_set_done:<v4l2decoder2> \
Requested frame 1000001, but driver returned frame 1.
0:03:51.394425216 12111 0x370df400 WARN \
v4l2codecs-decoder gstv4l2decoder.c:1157:gst_v4l2_request_set_done:<v4l2decoder2> \
Requested frame 1000002, but driver returned frame 2.
0:03:51.394665211 12111 0x370df400 WARN \
v4l2codecs-decoder gstv4l2decoder.c:1157:gst_v4l2_request_set_done:<v4l2decoder2> \
Requested frame 1000003, but driver returned frame 3.
0:03:51.394785833 12111 0x370df400 WARN \
v4l2codecs-h264dec gstv4l2codech264dec.c:1059:gst_v4l2_codec_h264_dec_output_picture:<v4l2slh264dec0> \
error: Failed to decode frame 1000000
ERROR: from element /GstPipeline:pipeline0/v4l2slh264dec:v4l2slh264dec0: Failed to decode frame 1000000
```
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5603>
This can happen with the dummy "noopenh264" library that the freedesktop
flatpak runtime ships, and Fedora is planning on shipping as well. In
both cases the dummy implementation gets replaced with the actual
openh264 library that's downloaded directly from Cisco, but just to be
on safe side, this patch makes it careful to check the return values to
avoid crashing if the underlying library hasn't been swapped out yet.
The patch is taken from freedesktop-sdk and was originally written by
Valentin David <valentin.david@codethink.co.uk>.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5586>
ISimpleAudioVolume controls volume of corresponding audio session
and there would be only single input/output audio session
in case of share-mode, which means that it controls audio volume of the
process. Instead, use IAudioStreamVolume interface which controls
volume of the stream.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5579>
Other Windows applications allow window switching even when
an application window is in fullscreen mode. Also fixing
regression introduced in 15248d8b84
which makes restored window is always located at topmost
since we do not call SetWindowPos() anymore when restoring
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5578>
Ignore alpha component of source (mouse cursor texture)
when blending alpha channel, otherwise the background area of source
(which has zeros) will be written to render target. Then it will result
in black rectangle if output texture is converted to premultiplied alpha
texture
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5577>
In snapshot mode pngenc should output exactly one frame
and then return FLOW_EOS to upstream. If upstream sends
more input frames before shutting down, it should keep
returning FLOW_EOS but not output any more encoded frames.
After a flushing seek it should output frames again though.
Fixes#3069.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5564>
The propose and decide allocation vfuncs are called directly from
basetransform and need to use the locked accessor function for
retrieving a reliable reference to the GstGLContext (if available)
Fixes spurious crashes on shutdown during pad reconfiguration
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5518>
- Don't try to make the parameters match `GHFunc`. Use a dedicated
callback for `g_hash_table_foreach`.
- Don't try to be clever with buffer memories. We're allocating a full
packet anyway, might as well memcpy and save on a lot of complexity.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5516>
After rendering a QML scene the qmlglsrc element copies the contents of
the scene to a GStreamer buffer. This happens on the Qt render thread.
Then it attaches a sync point to the destination buffer. This sync point
must be awaited by other threads which use the buffer later on. The
current implementation relies on the downstream elements to wait for the
sync point. However, there are situation where this does not work. The
GstBaseTransform e.g. copies the buffer metadata (which overwrites the
sync point without waiting for it) *before* waiting for the sync point.
This commit waits for the sync point inside the qmlglsrc element before
sending it downstream. The wait command is issued on the streaming
thread with the pipeline OpenGL context, i.e. it will synchronize with
the GStreamer OpenGL thread.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5515>
The v4l2codecs H.265 decoder uses the
GstH265SliceHdr::entry_point_offset_minus1 array so make sure that it is not
freed before decoding the frame.
Before this patch, some H.265 input would segfault in
gst_v4l2_codec_h265_dec_fill_slice_params() when executing the line:
guint32 entry_point_offset = slice_hdr->entry_point_offset_minus1[i] + 1;
Make sure that the array is not freed before using it.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5503>
With one regular image file path provided (without %05d),
the element was stuck in a dead loop counting the frames:
gst_image_sequence_src_count_frames
This allows to display any image file out of the element
for a given number of buffers.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5487>
We were already converting the pad last timestamp to running time but
not the segment position.
This segment position is used by gst_aggregator_simple_get_next_time()
to compute the waiting time when aggregating.
Those waiting times were wrong in my live pipeline using the system
clock, resulting in the aggregator to never wait at all.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5465>
While adding arbitrary tile support, a round up operation was badly
converter. This caused the Y component of the stride to be 0. This
eventually lead to a crash in glupoad preceded by the following
assertion.
gst_gl_buffer_allocation_params_new: assertion 'alloc_size > 0' failed
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5463>
While adding arbitrary tile support, a round up operation was badly
converter. This caused the Y component of the stride to be 0. This
eventually lead to a crash in glupoad preceded by the following
assertion.
gst_gl_buffer_allocation_params_new: assertion 'alloc_size > 0' failed
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5463>
This was causing a memory leak in cases like `gltestsrc ! gltransformation scale-x=0.5 ! glimagesink`.
Parent meta was being added in assumption that those buffers are different, which was not the case here,
creating a reference loop and never freeing the buffer.
Co-authored-by: Matthew Waters <matthew@centricular.com>
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5453>
The counter was using a signed 8 bit integer, which was overflowing
after 127 entries. That was then passed as an unsigned 32 bit integer to
libflac, which caused it to be converted to a huge unsigned number.
That then caused an invalid memory access inside libflac.
As a bonus, signed integer overflow is undefined behaviour.
Instead, use an unsigned 8 bit integer. Once this overflows the existing
code already catches it and stops adding the cue. While FLAC__metadata_object_cuesheet_insert_track()
takes an unsigned 32 bit integer for the track number, FLAC__StreamMetadata_CueSheet_Track is
limiting it to an unsigned 8 bit integer.
Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/2921
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5436>
The interaudiosrc might take buffers of different sizes from the audio adapter,
so keeping metas consistency would be an issue. So the sink now strips the audio
metas away and the src adds them back (for non-interleaved layouts only) when
taking buffers from the adapter.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5416>
Issue is that when amc was producing a codec-data buffer, a
GstVideoCodecFrame was being popped off the internal queue. This meant
that the codec-data was being associated with the first input frame and
the second (first encoded buffer) output buffer with the second input
frame. At the end (assuming one input produces one output which seems
to hold in my testing and how the encoder is currently implemented)
there would be an input frame missing and would be pushed without any
timing information. This would lead to e.g. muxers rejecting the buffer
without PTS and failing to mux.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5335>
Even if the segmentation feature value is not updated,
the parsed "segmentation_update_map" and "segmentation_temporal_update"
values should not be cleared as it's referenced during lower
level bitstream parsing. Also, don't use assert() in parser
unless it's clearly impossible condition.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5336>
gst_video_info_set_interlaced_format() can return an error if the
width/height causes integer overflow. Handle this case, so that we can
fail cleanly. This has been experienced while testing an in-progress
driver.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5319>
Some drivers will push an buffer flagged LAST but empty. In decoder
case, this results in an "producing too many buffer" warning, even
though the result is entirely correct. Detect this case in order to
signal EOS earlier and avoid this warning.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5319>
The timestamp offset can be negative, and it can be a bigger negative
number than the latency introduced by the rtpjitterbuffer so the overall
timeout offset can be negative.
Using the negative offset for calculating how many packets can still
arrive in time when encountering a lost packet in an equidistant stream
would then overflow and instead of considering fewer packets lost a lot
more packets are considered lost.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5318>
Setting the surface source rectangle has been omitted so far. As a side effect
surface created with padded width/height are being scaled down. Fix this using
the viewporter source rectangle configuration. This can later be enhanced
to support crop meta.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5298>
Since d3d11convert and its variant elements does not enable basetransform's
passthrough, passthrough allocation query needs to be handled
manually in order to respect downstream element's min/max buffer
requirement.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5297>
When using `gst_sdp_media_set_media_from_caps` on `application/x-rtp` caps
without `clock-rate` it wrongly reports missing payload type even if `payload`
is present in the caps.
This seems to be a copy&paste error from the error message for missing payload
type.
When using payload=10, both `clock-rate` and some other media properties are
defined by the RTP standard so I was wondering whether I could omit `clock-rate`
and was confused about the error message.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5252>
If decoder notify a source change event when the capture format is
changed, not the resolution changed.
then gst_v4l2_object_acquire_format will retuen false due to
unsupported format.
we need to clear the format lists in the source change flow,
and reenumerate format list
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5223>
Imported dmabuf are not being duped, so they should never be closed. Instead,
we ensure their live time by having strong reference on their original
buffer. This should fix potential flickering due to dmabuf being closed
too early.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5217>
Add gst_audio_ring_buffer_set_errored() that will mark the
ringbuffer as errored only if it is currently started or paused,
so gst_audio_ringbuffer_stop() can be sure that the error
state means that the ringbuffer was started and needs stop called.
Fixes a crash with osxaudiosrc if the source element posts
an error, because the ringbuffer would not get stopped and CoreAudio
would continue trying to do callbacks.
Also, anywhere that modifies the ringbuffer state, make sure to
use atomic operations, to guarantee their visibility
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5216>
It's quite confusing to print a function callback signature for
action signals when people need to do a g_signal_by_name() invocation
in order to use this feature. Requires too much background knowledge
about how GObject works under the hood to make sense of that.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5206>
By default, macOS attempts to run lldb against a misbehaving process to handle the crash. This does not play well
with the SISEGV/SIGQUIT handler we add in gst-launch/gst-validate. The 'spinning' mechanism causes the lldb
and debugserver processes ran by macOS to misbehave, taking 100% CPU and rendering both themselves and the GStreamer
instance frozen and very hard to effectively kill. macOS's Activity Monitor is also unusable while this is happening.
This patch takes the quickest possible solution of just disabling those signal handlers entirely on macOS.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5201>
Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/2771
This EOS branch exists so that if a seek with a stop is made, qtdemux
stops accepting bytes from the sink after the entire requested playback
range is demuxed, as otherwise we could keep download content that is
not being used.
This patch fixes two flaws that were present in that EOS check:
1) A comparison was made between track time and movie time without conversion.
This made the check trigger early in files with edit lists. This patch fixes
this by converting the track PTS to movie PTS (stream time) for the check.
2) To avoid sending a EOS prematurely when the segment stop is within a GOP and
B-frames are present, the check for EOS should only be done for keyframes. I
gather this was already the intention with the existing code, but because it
used `stream->on_keyframe` instead of the local variable `keyframe` the old
code was checking if the *previous* frame was a keyframe.
It's interesting to note that these two flaws in the old code mask each other
in most cases: the track PTS will have reached the movie end PTS, but EOS would
only be sent if the previous frame was a keyframe. A simple case where they
wouldn't mask each other, reproducing the bug, is a sequence of 3 frame GOPs
with structure I-B-P.
The following validateflow tests have been added to future-proof the
fix:
* validate.test.mp4.qtdemux_ibpibp_non_frag_pull.default
* validate.test.mp4.qtdemux_ibpibp_non_frag_push.default
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5114>
When switching from a raw stream to an encoded stream we need to make sure the
slot is unlinked, there is code in place for this but it wasn't triggered
because the slot being reconfigured wasn't advertised as linked beforehand.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5133>
In the current implementation, we support for most pixel format left
and top padding by changing the offset in the video meta. Though, to
align driver bytesused to the offset, we recalculate the offset, which
removed the modification we did before.
Instead, save the plane size, and truncate the driver reported bytesused
to the expected size, which ensures that the offsets still match. This
should also fix issues were the buffer size ended up bigger then the
pool size due to driver introduced padding.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5132>
We were checking if the tag list is writable, but it may actually be
shared through the same event (tee upstream or multiple consumers).
Fix a bug where multiple branches have a videoflip element checking the
taglist. The first one was changing the orientation back to rotate-0
which was resetting the other instances.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5099>
The libpsl subproject wasn't building successfully and CI didn't
notice because:
1. The plugin wasn't explicitly enabled
2. Even when the plugin is explicitly enabled, the dep is not required
at build time when not building a static plugin
So fix all of these issues.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4890>
The drop-frame rules are specified in “SMPTE ST 12-3:2016” and are
consistent with the traditional ones:
“
To minimize fractional time deviation from real time, the first two
super-frame numbers (00 and 01) shall be omitted from the count at the
start of each minute except minutes 00, 10, 20, 30, 40, and 50. Thus the
first eight frame numbers (0 through 7) are omitted from the count at
the start of each minute except minutes 00, 10, 20, 30, 40, and 50.
”
Where “super-frame” is a group of 4 frames for 120 FPS.
Fixes#2797
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5061>
Do not attempt to send a streams-selected message when reassigning
an output slot in case upstream signalled that it is handling stream selection.
In this case decodebin3 doesn't keep track of stream
collections (`dbin->collection` is NULL).
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5069>
Setting the input field on the empty slot prevents future linking of it and will
result in flow errors later on.
This was observed in WebKit's MediaStream source element, when it changes the
caps on one of its associated streams, from an encoded format to a raw video
format. The associated stream-id on the sticky stream-start event doesn´t
change, but the element creates a new GstStream with a different ID and sets it
on the stream-start event. Stream parsing is disabled in urisourcebin, so
decodebin3 handles the parsing. Without this patch we would end-up with unlinked
pads in decodebin3 after switching to the raw video format.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5067>
Generating the source element is done when urisourcebin is doing the READY to
PAUSED state change, so it is reasonable to set the new source element to that
state.
This also allows detecting early failures with backing libraries or
hardware (checks done in NULL->READY).
Finally it makes more sense to have an element in READY when attempting to query
information from it (such as SCHEDULING queries or probing live-ness).
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5058>
There's no guarantee it will *actually* be the URI which refered to what we are
downloading. It could be a stream URI or anything else.
Instead of putting something wrong, put no (specific) referer as a better choice
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5057>
The current implementation copies metas without checking if the buffer
is writable.
The operation that needs to be done, replacing the input buffer and
copying the metas, is only part of that process. We create a new function
that does both.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5054>
It's only malformed data in APP when its length is less than 6 chars,
because it should have at least an id string. Otherwise, if the id string
is not handled, no warning is raised, only a debug message noticing it.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5053>
This check fixes a critical warning that can happen when a pointer motion
happens and the video doesn't have its width/height information available.
GStreamer-Video-CRITICAL **: gst_video_center_rect: assertion 'src->h != 0' failed
#0 g_logv (log_domain=0x7ffff705e176 "GStreamer-Video", log_level=G_LOG_LEVEL_CRITICAL, format=<optimized out>, args=<optimized out>) at ../../../../Projects/jhbuild/glib/glib/gmessages.c:1422
#1 0x00007ffff7e1a81d in g_log (log_domain=<optimized out>, log_level=log_level@entry=G_LOG_LEVEL_CRITICAL, format=format@entry=0x7ffff7e77a9d "%s: assertion '%s' failed") at ../../../../Projects/jhbuild/glib/glib/gmessages.c:1460
#2 0x00007ffff7e1b749 in g_return_if_fail_warning (log_domain=<optimized out>, pretty_function=<optimized out>, expression=<optimized out>) at ../../../../Projects/jhbuild/glib/glib/gmessages.c:2930
#3 0x00007ffff701d90b in gst_video_sink_center_rect (src=..., dst=..., result=result@entry=0x7fffffffc6d0, scaling=scaling@entry=1) at ../../../../Projects/jhbuild/gstreamer/subprojects/gst-plugins-base/gst-libs/gst/video/gstvideosink.c:105
#4 0x00007fffe5652dbb in _fit_stream_to_allocated_size (result=0x7fffffffc6d0, allocation=0x7fffffffc6c0, base_widget=0x9396f0) at ../../../../Projects/jhbuild/gstreamer/subprojects/gst-plugins-good/ext/gtk/gtkgstbasewidget.c:326
#5 gtk_gst_base_widget_display_size_to_stream_size (base_widget=base_widget@entry=0x9396f0, x=1207.7109375, y=811.84765625, stream_x=stream_x@entry=0x7fffffffc720, stream_y=stream_y@entry=0x7fffffffc728) at ../../../../Projects/jhbuild/gstreamer/subprojects/gst-plugins-good/ext/gtk/gtkgstbasewidget.c:344
#6 0x00007fffe5651a4b in gst_gtk_base_sink_navigation_send_event (navigation=0x5ff990, event=0x178a730) at ../../../../Projects/jhbuild/gstreamer/subprojects/gst-plugins-good/ext/gtk/gstgtkbasesink.c:340
#7 0x00007fffe5652432 in gtk_gst_base_widget_motion_event (widget=<optimized out>, event=event@entry=0x1f14b60) at ../../../../Projects/jhbuild/gstreamer/subprojects/gst-plugins-good/ext/gtk/gtkgstbasewidget.c:404
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5051>
The videoencoder base class uses getcaps() to ask a subclass for the caps in its
sink_query_default() implementation.
Replace the custom handling of the QUERY_CAPS in the v4l2videoenc with an
implementation of getcaps() that returns the caps that are supported by the
v4l2videoenc to return these caps in the query.
This getcaps() implementation also calls the provided proxy_getcaps(), which
sends a caps query to downstream. This fixes the v4l2videoenc element to respect
limits of downstream elements in a sink query.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5036>
Given the amount of complains about artifacts when negotiating dmabuf
given incompatible drm-formats, and that there's no enough bandwidth
for a proper and quick fix in gstreamer-vaapi, this patch disables,
from decoders and postprocessor, the DMABuf caps feature.
For those who needs DMABuf can use the va elements in -bad, increasing
their ranking for autoplugging by using the environment variable
GST_PLUGIN_FEATURE_RANK=vah264dec:MAX, for example.
This can be considered a first step to the deprecation of
gstreamer-vaapi in favor of the va plugin in -bad.
Fixes: #1137
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5029>
Fix compiler warnings about not using the return value when
freeing the GString segment with g_string_free(.., FALSE):
ignoring return value of ‘g_string_free_and_steal’ declared with attribute ‘warn_unused_result’
which we get with newer GLib versions. These were all harmless.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5015>
There's no reason to release GstMemory manually at all.
If we do release GstMemory, corresponding GstBuffer will be
discarded by GstBufferPool baseclass because the size is changed
to zero.
Actual cause of heavy CPU usage in case of fixed-size pool
(i.e., decoder output buffer pool) and if we remove GstMemory from
GstBuffer is that GstBufferPool baseclass is doing busy wait in acquire_buffer()
for some reason. That needs to be investigated though, discarding
and re-alloc every GstBuffer is not ideal already.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4943>
If the capture pool is already active, like when handling gaps at the
start of a stream, do not setup the decoder to wait for src_ch event.
Otherwise the decoder will endup waiting for that at the wrong moment
and exit the decoding thread unexpectedly.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4996>
Fix this pipeline where the tag list is not writable:
gst-launch-1.0 videotestsrc ! taginject tags="image-orientation=rotate-90" ! videoflip video-direction=auto \
! autovideosink
GStreamer-CRITICAL **: 12:34:36.310: gst_tag_list_add: assertion 'gst_tag_list_is_writable (list)' failed
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4990>
Refusing an incoming segment in < GST_MATROSKA_READ_STATE_DATA should only be
done if the incoming segment is not in GST_FORMAT_TIME.
In GST_FORMAT_TIME, we are just storing the values and returning, so we can
invert the order of the checks.
Fixes proper segment propagation in matroska/webm DASH use-cases
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4922>
Is a seek is done on stream-collection post, there are no selected streams
yet. Therefore none would be chosen to adjust the key-unit seek.
If no streams are selected, fallback to a default stream (i.e. one which has
track(s) with GST_STREAM_FLAG_SELECT).
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4922>
When seeking is handled by the collection posting thread, there is a possibility
that some leftover data will be pushed by the stream thread.
Properly detect and reject those early segments (and buffers) by comparing it to
the main segment seqnum
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4922>
... otherwise streams with constant size samples defined with a single
`sample_size` for all samples in the `stsz` box fall in the category
`chunks_are_samples` in `qtdemux_stbl_init`, overriding the actual
sample count.
`FOURCC_soun` would set this automatically for `compression_id == 0xfffe`,
however `compression_id` is read from the Audio Sample Entry box at an offset
marked as "pre-defined" in some version of the spec and set to 0 both by
GStreamer and FFmpeg for opus streams.
Considering the stream `sampled` flag is set explicitely by other fourcc
variants, doing so for opus seems consistent.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4908>
This is a small optimization and avoids restarting the next parsing
iteration on already accepted data.
On its own it would also fix ZDI-CAN-20968 (see previous commit) but the
previous commit independently is also a valid fix for it.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4898>
This will cause an integer overflow a little bit further down because we
allocate a bit more memory to allow for a NUL-terminator.
The caller should've avoided passing that much data in already as it's
not going to be a valid image and there's likely not even that much data
available.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4897>
The "Encapsulation of Opus in ISO Base Media File Format" [1] specifications,
§ 4.3.2 Opus Specific Box, indicates that data must be stored as big-endian.
In `build_opus_extension`, `gst_byte_writer_put*_le ()` variants were used,
causing audio streams conversion to Opus in mp4 to offset samples due to the
PreSkip field incorrect value (29ms early in our test cases).
[1] https://opus-codec.org/docs/opus_in_isobmff.html#4.3.2
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4891>
The framerate should only be replaced (and corrected for alternating field)
when it is parsed from the bitstream. Otherwise, the upstream framerate
from caps should be trusted and assumed correct.
Related to gst-plugins-bad!2020
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4352>
If two senders use the same multicast IP and port then new_session_pad()
may try to add a srcpad to the same stream twice.
stream->srcpad is updated but gst_element_add_pad() fails the second
time. As a result stream->srcpad points to a deleted object and
access in gst_sdp_demux_stream_free() fails with a segfault.
Just ignore the second pad. Nothing useful can be done with it anyway.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4873>
The muxer used a fixed value of 2 channels because the TR 102 366 spec
says they're to be ignored. However, the demuxer still trusted them,
resulting in bad caps.
Make the muxer fill in the correct channel count anyway (FFmpeg already
does) and make the demuxer ignore the value.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4773>
A race condition can occur in `srtpdec` during the READY -> NULL transition:
an RTCP buffer can make its way to `gst_srtp_dec_chain` while the element is
partially stopped, resulting in the following critical warning:
> Got data flow before segment event
The problematic sequence is the following:
1. An RTCP buffer is being handled by the chain function for the
`rtcp_sinkpad`. Since, this is the first buffer, we try pushing the sticky
events to `rtcp_srcpad`.
2. At the same moment, the element is being transitioned from PAUSED to READY.
3. While checking and pushing the sticky events for `rtcp_srcpad`, we reach the
Segment event. For this, we try to get it from the "otherpad", in this case
`rtp_srcpad`. In the problematic case, `rtp_srcpad` has already been
deactivated so its sticky events have been cleared. We won't be pushing any
Segment event to `rtcp_srcpad`.
4. We return to the chain function for `rtcp_sinkpad` and try pushing the
buffer to `rtcp_srcpad` for which deactivation hasn't started yet, hence the
"Got data flow before segment event".
This commit:
- Adds a boolean return value to `gst_srtp_dec_push_early_events`: in case the
Segment event can't be retrieved, `gst_srtp_dec_chain` can return an error
instead of calling `gst_pad_push`.
- Replaces the obsolete `gst_pad_set_caps` with `gst_pad_push_event`. The
additional preconditions checked by previous function are guaranteed here
since we push a fixed Caps which was built in the same function.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4860>
glfilter will unref input buffer after _transform() call immidiately,
but gpu may still reading input buffer for rendering because gl
api is executed async. Need hold reference for input buffer by
adding parent meta to output buffer.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4846>
Appsink will unref prev sample in dispose function. Which is later
when V4L2 video decoder link with appsink as V4L2 video decoder
will close V4L2 device fd during GST_STATE_CHANGE_READY_TO_NULL.
If the video buffer return to V4L2 video decoder after the decoder
closed V4L2 device fd, V4L2 can't release the video frame buffer
which allocated with MMAP mode as application can't call
VIDIOC_REQBUFS 0 to release the video frame buffer by V4L2 driver.
The memory of the video frame will leak.
Unref the gstbuffer in stop() function, so V4L2 video decoder
can received all video frame buffers and release it before close
V4L2 device fd.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4820>
The qt5 and qt6 plugins will now correctly error out if you enable the
option, and you can also now explicitly ensure that wayland, x11,
eglfs support is actually functional by enabling the options. It was
too easy to build non-functional support for these.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4776>
Without this, the plugin cannot be loaded in a devenv because the
RPATH is not added to the plugin dylib. This RPATH will be stripped on
install, which is what we want.
When deploying apps, people are supposed to use `macdeployqt` to
create an AppBundle that bundles Qt for you and sets the RPATHs
correctly to point to that bundled Qt.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4776>
Configuration of our debugging system is possible before init, and in
fact is necessary too, otherwise the settings won't apply to logging
that happens during init.
For instance, since you cannot register a log function before you call
init in python, there is no way for you to log errors during init to
whatever logging service your app uses.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4763>
Due to the alpha value being inserted with _BEFORE, we were ending up
with ARGB instead of RGBA, thus displaying completely wrong colours.
According to libpng's manual, "to add an opaque alpha channel, use filler=0xff
or 0xffff and PNG_FILLER_AFTER which will generate RGBA pixels".
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4759>
self->eos was never reset after streamsynchronizer has sent EOS
(except on explicit flush or switching back to PAUSED).
As a result, synchronization was broken if new streams were pushed later
as gst_stream_synchronizer_wait() does not wait if self->eos is set.
Fix this by reseting self->eos on STREAM_START as that means a new
stream is being sent upstream and so a new EOS will follow later on.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4755>
The `switch (n_rear)` supports up to 5 rear channels, but our channel
set only had space for 3. Size the set properly to fix this.
This didn't actually cause any memory unsafety as `PUSH_CHAN` would stop
incrementing `n_rear` if the channel set is already full.
Thanks to @alatiera for noticing this.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4740>
Since c0bf793c05 ("flvmux: Set PTS based on
running time") the timestamp of the output buffer is already in running
time. So using that for 'srcpad->segment.position' does not work correctly
because gst_aggregator_simple_get_next_time() will convert it again with
gst_segment_to_running_time().
This means that the timestamp returned by
gst_aggregator_simple_get_next_time() may be incorrect. For example, if
flvmux is added to a already runinng pipeline then the timestamp is too
small and gst_aggregator_wait_and_check() returns immediately. As a result,
buffers may be muxed in the wrong order.
To fix this, use the PTS of the incoming buffer instead of the outgoing
buffer. Also add the duration as get_next_time() is supposed to return the
timestamp of the next buffer, not the current one.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4734>
There are broken(?) mjpeg videos that are incorrectly detected as
interlaced. This happens because 'info.height > height' (e.g. 1088 > 1080).
In the interlaced case info.height is approximately 'height * 2' but not
exactly because height is a multiple of DCTSIZE. Make the check more
restrictive but take the rounding effect into account.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4717>
For interlaced jpeg, gst_jpeg_dec_decode_direct() is called twice, once for each
field. In this case, stride[n] is plane_stride[n] * 2 to ensure that only every
other line is written. So the loop must stop at height / num_fields.
If the frame is really interlaced then continuing beyound this, is not harmful,
because jpeg_read_raw_data() will do nothing and return 0, so am info message is
printed.
However, if the frame is not actually interlaced, just misdetected as interlaced
then there is still data available from the second half of the frame. Now
line[0][j] is set to the scratch buffer. If the scratch buffer is not allocated
(because the height is a multiple of v_samp[0] * DCTSIZE) then the result is a
segfault due to a null-pointer dereference.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4717>
When the alignment contains nothing, all its fields are 0 and always
can be satisfied. So there is no need to validate it in this case.
And there are a lot of places just setting this alignment to default
all zero value, this validation generates lots of warnings.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4704>