This example demonstrates how to use rtpbin with retransmission (rtx)
elements set in the place of rtpbin's "aux" elements in order to
enable RTP retransmission according to the rules of RFC4588.
The "message" property has been replaced by "post-messages".
Pre-patch output:
(test_spectrum:23101): GLib-GObject-WARNING **: g_object_set_valist:
object class `GstSpectrum' has no property named `message'
New spectrum message, endtime 0:00:00.100000000
(test_spectrum:23101): GStreamer-CRITICAL **:
gst_value_list_get_value: assertion `GST_VALUE_HOLDS_LIST (value)' failed
[...]
Post-patch:
New spectrum message, endtime 0:00:00.100000000
band 0 (freq 400): magnitude -65.988777 dB phase 1.533397
band 1 (freq 1200): magnitude -65.545563 dB phase -0.780900
band 2 (freq 2000): magnitude -64.791946 dB phase -0.799611
band 3 (freq 2800): magnitude -64.556175 dB phase -0.063615
[...]
https://bugzilla.gnome.org/show_bug.cgi?id=704179
Allows applications to connect to the "draw" signal of
the element and do their custom drawing there.
Includes an example application demonstrating usage.
Fixes: https://bugzilla.gnome.org/show_bug.cgi?id=595520
We need to have the capsfilter behin the converters to make the converters
convert from the formats v4l2src can do to what we request with the
capsfilter.
Make the examples use autovideosink and ffmpegcolorspace for better
compàtibility.
Make some more variables for the sink and the decoders.
Set zerolatency tuning on x264enc for better realtime results.
Use foo_LDADD instead of foo_LDFLAGS to specify the libraries to link to.
This should make sure arguments are passed to the linker in the right
order, and makes LDFLAGS usable again.
Based on patch by Brian Cameron <brian.cameron@oracle.com>
Fixes#615697.
Original commit message from CVS:
* tests/examples/rtp/server-alsasrc-PCMA.c: (print_source_stats),
(print_stats), (main):
Add some example code for printing the RTP manager stats.
Original commit message from CVS:
* tests/examples/rtp/server-decodebin-H263p-AMR.sh:
Add example RTP transcoding pipeline from any file decodedable with
uridecodebin.
Original commit message from CVS:
* tests/examples/rtp/.cvsignore:
* tests/examples/rtp/Makefile.am:
* tests/examples/rtp/client-PCMA.c: (pad_added_cb), (main):
* tests/examples/rtp/server-alsasrc-PCMA.c: (main):
Add two C examples of using gstrtpbin as a sender and a receiver.
Original commit message from CVS:
* tests/examples/level/level-example.c:
Set fakesink to sync. Otherwise people might question the message
interval. Nevertheless the timestamp in the message is what matters.
Original commit message from CVS:
* tests/examples/rtp/client-H263p.sdp:
* tests/examples/rtp/client-H263p.sh:
* tests/examples/rtp/server-VTS-H263p.sh:
Add some more H263p server and client examples.
Original commit message from CVS:
* tests/examples/spectrum/demo-audiotest.c:
* tests/examples/spectrum/demo-osssrc.c:
Demo how to draw analyzer results synced to the clock.
Original commit message from CVS:
* gst/rtsp/URLS:
Some more urls.
* gst/smpte/barboxwipes.c:
Add a comment
* tests/examples/rtp/server-v4l2-H264-alsasrc-PCMA.sh:
Fix typo, add audioresample to the pipeline.
Original commit message from CVS:
* ext/wavpack/gstwavpackstreamreader.c:
* tests/examples/spectrum/demo-audiotest.c:
* tests/examples/spectrum/demo-osssrc.c:
Fix some compiler warnings.
Original commit message from CVS:
Patch by: Jens Granseuer <jensgr at gmx dot net>
* tests/examples/equalizer/demo.c: (main):
C89 fix, moving variable declarations to the beginning of
the block. Fixes bug #517933.
Original commit message from CVS:
* tests/examples/spectrum/spectrum-example.c:
Add missing include to fix compilation when libxml usage is disabled.
Fixes: #516371
Original commit message from CVS:
* docs/plugins/Makefile.am:
* gst/spectrum/gstspectrum.c:
* tests/examples/spectrum/.cvsignore:
* tests/examples/spectrum/Makefile.am:
* tests/examples/spectrum/spectrum-example.c:
Add a simple example application for the spectrum element, include it
in the docs, and fix some documentation ambiguities.
Fixes: #348085
Original commit message from CVS:
* gst/multifile/gstmultifilesrc.c: (gst_multi_file_src_create):
Need to use gsize here for the size, fixes compiler warning.
* tests/examples/equalizer/.cvsignore:
* tests/examples/equalizer/Makefile.am:
* tests/examples/spectrum/.cvsignore:
* tests/examples/spectrum/Makefile.am:
Add missing files to fix the build.
Original commit message from CVS:
* gst/equalizer/demo.c: (draw_spectrum):
* gst/spectrum/demo-audiotest.c: (draw_spectrum):
* gst/spectrum/demo-osssrc.c: (draw_spectrum):
* gst/spectrum/gstspectrum.c: (gst_spectrum_class_init):
Change the meaning of the magnitude values given in the
GstMessages by spectrum to decibel instead of
decibel+threshold.
Original commit message from CVS:
* gst/equalizer/demo.c:
Make default volume a bit less. Improve layout by giving more space to
the slider with big-numbers and enable fill.
Original commit message from CVS:
* gst/spectrum/demo-audiotest.c: (main):
Use autoaudiosink instead of alsasink and use a sine wave.
* gst/spectrum/gstspectrum.c:
Fix the magnitude calculation.
Original commit message from CVS:
* gst/equalizer/demo.c: (main):
* gst/equalizer/gstiirequalizer.c:
(gst_iir_equalizer_band_class_init), (setup_filter):
Allow setting 0 as bandwidth and handle this correctly.
Also handle a bandwidth of rate/2 properly.
* gst/equalizer/gstiirequalizernbands.c:
(gst_iir_equalizer_nbands_class_init):
Make it possible to generate a N-band equalizer with 1 bands. The
previous limit of 2 was caused by a nowadays replaced calculation
doing a division by zero if number of bands was 1.
Original commit message from CVS:
* gst/equalizer/Makefile.am:
* gst/equalizer/demo.c: (on_window_destroy), (on_configure_event),
(on_gain_changed), (on_bandwidth_changed), (on_freq_changed),
(draw_spectrum), (message_handler), (main):
Add small demo application based on the spectrum demo applications
that gets white noise as input, pushes it through an equalizer and
paints the spectrum. For every equalizer band it's possible to set
gain, bandwidth and frequency.
* gst/equalizer/gstiirequalizer.c: (setup_filter):
Add some guarding against too large or too small frequencies and
bandwidths. Also improve debugging a bit.
Original commit message from CVS:
* configure.ac:
* gst/spectrum/Makefile.am:
* gst/spectrum/demo-audiotest.c: (draw_spectrum),
(message_handler), (main):
* gst/spectrum/demo-osssrc.c: (draw_spectrum), (message_handler):
* gst/spectrum/gstspectrum.c: (gst_spectrum_base_init),
(gst_spectrum_class_init), (gst_spectrum_init),
(gst_spectrum_dispose), (gst_spectrum_set_property),
(gst_spectrum_get_property), (gst_spectrum_start),
(gst_spectrum_setup), (gst_spectrum_message_new),
(gst_spectrum_transform_ip):
* gst/spectrum/gstspectrum.h:
Port GstSpectrum to GstAudioFilter and libgstfft, add support
for int32, float and double, use floats for the message contents,
average all FFTs done in one interval for better results, use
a better windowing function, allow posting the phase in the message
and actually do an FFT with the requested number of bands instead
of interpolating.
* tests/check/elements/spectrum.c: (GST_START_TEST),
(spectrum_suite):
Improve the units tests by checking for a 11025Hz sine wave
and add unit tests for all 4 supported sample types.
Original commit message from CVS:
* gst/spectrum/demo-audiotest.c: (message_handler):
* gst/spectrum/demo-osssrc.c: (message_handler):
Remove two obsolete and confusing comments.
Original commit message from CVS:
* gst/spectrum/demo-osssrc.c: (draw_spectrum), (main):
Use more defines
* gst/spectrum/gstspectrum.c: (gst_spectrum_init),
(gst_spectrum_dispose), (gst_spectrum_set_caps),
(gst_spectrum_transform_ip):
* gst/spectrum/gstspectrum.h:
Apply some of the spectrum cleanup changes suggested in #348085.
Original commit message from CVS:
* gst/spectrum/demo-audiotest.c: (on_window_destroy),
(draw_spectrum), (message_handler), (main):
* gst/spectrum/demo-osssrc.c: (on_window_destroy), (draw_spectrum),
(message_handler), (main):
port to use message to get results, cleanly exit when closing the window
* gst/spectrum/gstspectrum.c: (gst_spectrum_class_init),
(gst_spectrum_init), (gst_spectrum_dispose),
(gst_spectrum_set_property), (gst_spectrum_get_property),
(gst_spectrum_set_caps), (gst_spectrum_start),
(gst_spectrum_message_new), (gst_spectrum_transform_ip):
* gst/spectrum/gstspectrum.h:
port to derive from basetransform and send results via messages
(like level element)
Original commit message from CVS:
* tests/examples/level/Makefile.am:
Add -lm to LIBS for pow() function, don't assume one of our
dependencies (such as libxml-2.0) drags it in automatically
(#343603).
Original commit message from CVS:
* gst/spectrum/Makefile.am:
Link to base libraries
* gst/spectrum/demo-osssrc.c: (main):
use new threshhold property
* gst/spectrum/gstspectrum.c: (gst_spectrum_class_init),
(gst_spectrum_init), (gst_spectrum_dispose),
(gst_spectrum_set_property), (gst_spectrum_set_sink_caps),
(gst_spectrum_get_sink_caps), (gst_spectrum_chain),
(gst_spectrum_change_state):
* gst/spectrum/gstspectrum.h:
Use gst_adapter, support multiple-channels, add threshold property for
result, add docs, fix resulting spectrum range (was including mirrored
results)
Original commit message from CVS:
* gst/spectrum/Makefile.am:
* gst/spectrum/demo-osssrc.c: (spectrum_chain), (main),
(idle_func):
Fix demo and reenable it. Yes, I'm currently playing with audio
analysis tools
Original commit message from CVS:
* removal of //-style comments
* don't link plugins to core libs -- the versioning is done internally to the plugins with the plugin_info struct,
and symbol resolution is lazy, so we can always know if a plugin can be loaded by the plugin_info data. in theory.
