This change allow output caps to be updated even though we stay in
streaming state. This is needed so that any upstream updated to fields
like framerate, hdr data, etc. can result in a downstream caps event
being pushed.
Previously, any of these changes was being ignored and the downstream
caps would not reflect it.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3328>
In theory, input caps can be updated anytime at non-keyframe or
sequence boundary, such as HDR10 metadata, framerate, aspect-ratio
or so. Those information update might not trigger ::new_sequence()
or subclass may ignore the changes.
By this commit, input state change will be tracked by baseclass
and subclass will be able to know the non-decoding-essential
update by checking the codec specific picture struct
on ::output_picture()
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3328>
This reverts commit fcad4cc646.
This was wrong is so many ways.
* The memcmp was badly used (it should use == 0 to check the data is identical,
and not != 0)
* There was no boundary checks on the present stream section_data when passing
it to memcmp.
* The return value should have been TRUE (i.e. we have done all checks, none of
them failed, therefore the section has been seen before)
* stream->section_data would *always* be NULL if the section had already been
processed
Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1559
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3421>
Rewriting GstCudaConverter object, since the old implementation was not
well organized and it's hard to add new features.
Moreover, the conversion operations were not very optimized.
Major change of this implementation:
* Remove redundant intermediate conversion operations such as
any RGB -> ARGB(64) conversion or any YUV -> Y444 (or 16bits Y444).
That's not required most of cases. The only required case is
converting 24bits (such as RGB/BGR) packed format to 32bits format
because CUDA texture object does not support sampling 24bits format
* Use normalized sample fetching (i.e., [0, 1] range float value)
and also normalized coordinates system for CUDA texture.
It's consistent with the other graphics APIs such as Direct3D
and OpenGL, that makes sampling operations much easier.
* Support a kind of viewport and adopt math for colorspace conversion
from GstD3D11 implementation
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3389>
GstCudaConverter object can do colorspace conversion and scale at once.
Adding new element "cudaconvertscale" to do that, this can
save unnecessary GPU operation if colorspace conversion and
rescale is required for given input stream format.
Most of codes are taken from d3d11convert element
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3389>
Instead of returning a "const gchar" or a "gchar" that should not be freed, always
return a duplicated string as those functions were used together with g_strdup anyway.
This is needed to prepare support for returning modified strings in next commit.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1147>
If we don't receive any data from usrsctp, then there will be no src pad
for the stream id and the stream reset will fail to remove the relevant
src pad. Workaround by first attempting to add the relevant src pad, then
almost immediately removing it.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3381>
Replace video_copy with memcpy to fix the issue when the sizes of the
src frame and dst frame don't match. Moreover, for Windows, you have to
do the copy first and call gst_msdk_import_to_msdk_surface later.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3231>
Replace video_copy with memcpy to fix the issue when the sizes of the
src frame and dst frame don't match. Moreover, for Windows, you have to
do the copy first and call gst_msdk_import_to_msdk_surface later.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3231>
Currently MSDK context does not support d3d11va. Now introduce d3d11va
device to MSDK context, making it able to create msdk session with d3d11
device and to easily share with upstream and donwstream.
Add environment variable to enable user to choose GPU device in multi-GPU
environment. This variable is only valid when there's no context
returned by upstream or downstream. Otherwise it will use the device
that created by upstream or downstream.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3231>
Add support for more formats so as to run the libvpx high bit depth test suite.
This means the files under CONFIG_VP9_HIGHBITDEPTH
This also allows running the yuv444p 8bit file in the regular 8 bit vp9 suite.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3356>
If an input is malformed (only produces cea608 field 1 cc_data) then
when in passthrough we would effectively be dropping every second cea608
on output as we would not store any unused cea608 data.
Fix by having all code paths go through the framerate conversion code
which will store and retrieve any relevant data across buffers.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3211>
... otherwise PAR can be wrongly signalled during the negotiation
Fixing below pipeline when desktop resolution is not 640x480
gst-launch-1.0.exe \
d3d11screencapturesrc ! videoscale !
video/x-raw,width=640,height=480,pixel-aspect-ratio=1/1 ! d3d11videosink
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3360>
1. Removes the verification if the internal encoder is not opened
yet to allow the property setting.
2. And toggles on the base class' reconf flag for each property
variable that can be modified at run time.
3. Mark those modifiable properties as mutable while playing.
Currently the run-time modifiable properties are:
qpi, qpp, qpb, bitrate, target percentage, target usage and rate control
Other properties can be enabled too, but they need testing.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2466>
Adds an internal function reset() which drains the internal queues and
calls the reconfig() vmethod.
This reset() method is called inconditionally at set_format() and in
handle_frame() if the instance's reconf flag is enabled.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2466>
If parameters remain similar enough to avoid either encoder reopening
or downstream renegotiation, avoid it.
This is going to be useful for dynamic parameters setting.
To check if the stream parameters changed, so the internal encoder has
to be closed and opened again, are required two steps:
1. If input caps, profile, chroma or rate control mode have changed.
2. If any of the calculated variables and element properties have
changed.
Later on, only if the output caps also changed, the pipeline
is renegotiated.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2466>
This method will return the caps configured in the reconstruct buffer
pool, and its maxium number of buffers to allocate.
The caps are needed later to know if the internal encoder has to be
reopened if the stream properties change.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2466>
This adds a new boolean property `auto-reconnect`, defaulting to `true`.
Setting it to `false` makes the elements (in caller mode) immediately
report an error to the application instead of trying to reconnect.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3326>
Adding DirecShow video capture filter mode, in addition
to existing MediaFoundation and WinRT(UWP) mode, to support
DirectShow only filters (not KS driver compatible)
such as custom virtual camera filters.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3350>
- Make the srt_epoll_wait loops more uniform.
- Error only via GError when possible; let the element send the error
message. Avoids a second error message.
- Return 0 when cancelled. Avoids an error message from the element.
- Don't send an error message from send_headers when we're a server
sink.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3156>
These null checkes are slightly misleading when double-checking
mutability for external language interop. None of the functions in
these files allow the variable at hand to become `NULL` under normal
operation, because they are checked at initialization and never (allowed
to be) reassigned to `NULL`.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1615>
This is an additional quality parameter. In the default configuration this
quality switch is deactivated because it would cause a workload increase
which might be significant. If workload is not an issue in the application
it can be recommended to activate this feature.
A flush request is done when set_format is called to empty internal bit
buffer maintained by fdk-aac. When this happens, during the explicit
call to handle_buffer, decodeFrame does not return a AAC_DEC_OK. This
gets reported as a decoding error while no decoding error in fact took
place. Since this can be confusing, just return a GST_FLOW_OK and log
that an explicit flush was requested.
In fact, all the h264 bit writer have byte aligned output except
the slice header. So we change the API from bit size in unit to
byte size, which is easy to use. For slice header, we add a extra
"trail_bits_num" to return the unaligned bits number.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3193>
We use va pool as msdkvpp's bufferpool, which means both va memory
and dma memory will be allocated by va pool. Considering drm modifier
stuff is not ready, we use va memory with higher priortiry than
dma memory when deciding vpp caps.
Besides, this patch removes the specified "interlace-mode" in vpp caps.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3253>
The gap handling was in place, but there was no event handler to trigger it.
Implement the alpha sink event handler for the gaps. This fixes handling of
valid streams which may not refresh the alpha frames for every video frames.
It will also allow a clean error if the stream was missing the initial
alpha frame, at least until we find a better way to handle these
invalid frames.
Related to #1518
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3264>
Handle when encoder doesn't support rate control, which is set as
VA_RC_NONE, and if the set rate control mode is not supported by the
GStreamer element, the element configuration fails.
Also it logs out max and target bitrate.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3063>
The entrypoint is set when the encoder helper is constructed,
nonetheless it was also passed as parameter when opening. That's
buggy.
In order to simplify the code, the entrypoint at construction is
honored.
But gst_va_encoder_has_profile_and_entrypoint() now doesn't rely in
the internal list of profiles since it only contains those that
belongs to codec and entrypoint, thus it queries directly the VA
driver.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3063>
Need to put the actual profile in the output caps otherwise any
capsfilter after the encoder that was used to force the output
profile will fail, such as
fdkaacenc ! audio/mpeg,stream-format=adts,profile=he-aac-v1 ! ..
because we put profile=lc in there to match the profile signaled
in the ADTS header. This is expressed through the base-profile=lc
in the GStreamer caps though, the profile needs to carry the
'real' profile.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1785>
duplicate symbol '__invoke_on_main' in:
/Library/Frameworks/GStreamer.framework/Versions/1.0/lib/libgstvulkan-1.0.a(cocoa_gstvkwindow_cocoa.m.o)
/Library/Frameworks/GStreamer.framework/Versions/1.0/lib/libgstgl-1.0.a(cocoa_gstglwindow_cocoa.m.o)
ld: 1 duplicate symbol for architecture x86_64
clang: error: linker command failed with exit code 1 (use -v to see invocation)
Also make the same change in iOS for consistency.
Continuation of https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/issues/1132
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3242>
Add Windows Graphics Capture (WGC) API based screen capture mode.
The conditions where this mode is used:
* Explicitly requested by user (capture-api property)
* To capture specific window
* When DXGI desktop duplication API does not work on hybrid graphics systems
(e.g., multi-gpu laptop)
Full features of this implementation require Windows 11. And Windows 11
SDK is required to build this feature.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3144>
When the output alignment is smaller than the input alignment, for
example, When the output alignment is "FRAME" and the parse is likely
connecting to a decoder, the current PTS setting for AV1 frames inside
a TU is not very correct.
For example, a TU may begin with non-displayed frames and end with a
displayed frame. The current way will assign the PTS to the first
non-displayed frame, which is a decode-only frame and the PTS will be
discarded in the video decoder. While the last displayed frame has
invalid PTS, and so the video decoder needs to guess its PTS based on
the frame rate and previous frame's PTS. This is not a decent and
robust way. And more important, when the previous frames provide DTS,
the video decoder will also guess the PTS based on the previous frames'
DTS and trigger the warning like:
gstvideodecoder.c:3147:gst_video_decoder_prepare_finish_frame: \
<vavp9dec0> decreasing timestame
It sets the reordered_output and makes the decoder in free run mode.
We should correct the PTS for a TU, let the non-displayed frames have
no PTS while set the correct PTS to the displayed one. Also, when the
AV1 stream has multi spatial layers, there are more than one displayed
frames inside one TU with the same PTS.
Note: If the input alignment is not TU aligned, we can not know the
exact PTS of this TU, and so we just clear the PTS of the decode only
frame and leave others unchanged.
We also correct all the PTS if the output is OBU aligned. All their
PTS and DTS are set to the input buffer's PTS.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3182>
When the incoming data has big alignment than the output, we do not need to
call finish_frame() and exit the current handle_frame() for each splitted
frame. We can push them all at one shot with in one handle_frame(), whcih
may improve the performance and can help us to find the edge of TU.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3182>
Adding loopback capture mode for specified PID.
Note that this feature requires Windows 10 build 20348
(Windows 11/Windows Server 2022 or later),
and any process loopback related properties will not be exposed
if OS does not support it.
Example launch lines:
* wasapi2src loopback-mode=include-process-tree loopback-target-pid=<PID>
Captures audio generated by an application (specified by PID)
and its child process
* wasapi2src loopback-mode=exclude-process-tree loopback-target-pid=<PID>
Captures desktop audio excluding PID and its child process
Fixes: https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1278
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3195>
If there is an error while connecting, the streaming task will be stopped, and
is_running() will be false, causing a GST_FLOW_FLUSHING to be returned. Instead,
we perform the error check (!self->connection) first, to return an error if
that's what occured.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3189>
When the alignment is "FRAME" and the parse is likely connecting to
a decoder, the current PTS setting for VP9 frames inside a super
frame is not very correct.
For example, the super frame may begin with non-displayed frames and
end with a displayed frame. The current way will assign the PTS to
the first non-displayed frame, which is a decode-only frame and the
PTS will be discarded in the video decoder. While the last displayed
frame has invalid PTS, and so the video decoder needs to guess its
PTS based on the frame rate and previous frame's PTS. This is not a
decent and robust way. And more important, when the previous frames
provide DTS, the video decoder will also guess the PTS based on the
previous frames' DTS and trigger the warning like:
gstvideodecoder.c:3147:gst_video_decoder_prepare_finish_frame: \
<vavp9dec0> decreasing timestame
It sets the reordered_output and makes the decoder in free run mode.
We should correct the PTS for a super frame, let the non-displayed
frames have no PTS while set the correct PTS to the displayed one.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3155>
Apparently we cannot start sending messages from another datachannel
before the previous message was completely sent. usrsctplib will
complain about being locked on another stream id and set
errno=EINVAL.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2454>
The order of the devices iterator from the SDK is undefined and can
randomly change.
Keep the device-number property for backwards compatibility and
simplicity but prefer the persistent-id property and also use it for the
device provider implementation.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3078>
GstDXGIGetDebugInterface() is unused when targeting UWP. We directly
call DXGIGetDebugInterface1() in that case.
Fixes build failure:
../gst-libs/gst/d3d11/gstd3d11device.cpp(271): error C2440: '=': cannot convert from 'HRESULT (__cdecl *)(UINT,const IID &,void **)' to 'DXGIGetDebugInterface_t'
../gst-libs/gst/d3d11/gstd3d11device.cpp(271): note: This conversion requires a reinterpret_cast, a C-style cast or function-style cast
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3118>
According to W3C
specification (https://w3c.github.io/webrtc-pc/#datachannel-send) we
should return InvalidStateError exception when trying to send when the
channel is not open. In the world of C/glib/gstreamer we don't have
exceptions but have to rely on gboolean/GError instead. Introducing
these calls for a change in function signature of the action signals
used to send data on the datachannel. Changing the signature of the
existing "send-string" and "send-data" signals would mean an immediate
breaking change so instead we deprecate them. Furthermore, there is no
way to express GError** as an argument to an action signal in a way
that fits language bindings (pointer-to-pointer simply does not work)
and we have to use regular functions instead.
Therefore we introduce gst_webrtc_data_channel_send_data_full() and
gst_webrtc_data_channel_send_string_full() while deprecating the old
functions and corresponding signals.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1958>
Currently if the user is not able to access the devices under /dev/media*,
either due to no media devices present on the system or simply no permission
to access the device, v4l2codecs initialises with no features or debug messages.
Since calling `GST_DEBUG="v4l2*:7" gst-inspect-1.0 v4l2codecs` is a typical way
to diagnose why element(s) failed to enumerate, we should be more verbose here
when the user is not able to access any /dev/media* device. So print a simple
debug message in this case to aid debugging.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3088>
Since commit a79a756b79 we could change to ignore-pcr automatically at 500ms
into a live stream when no PCR is seen by then. However the stream counting in
program change detection was wrongly considering ignore-pcr programs to have a
separate PCR PID, even though we are actually ignoring the PCR PID completely,
resulting in an erroneous program switch getting triggered from the different
stream count. This in turn would send an EOS and switch out the pads for what
actually is still the same program, while we intended to simply apply a
workaround for broken encoders.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3060>
Fixes warning with meson 0.62:
gst-plugins-bad| subprojects/gst-plugins-bad/meson.build:546: WARNING:
Project targets '>= 0.62' but uses feature deprecated since '0.62.0':
pkgconfig.generate variable for builtin directories. They will be
automatically included when referenced
and more.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3086>
Starting with Meson 0.62, meson automatically populates the variables
list in the pkgconfig file if you reference builtin directories in the
pkgconfig file (whether via a custom pkgconfig variable or elsewhere).
We need this, because ${prefix}/libexec is a hard-coded value which is
incorrect on, for example, Debian.
Bump requirement to 0.62, and remove version compares that retained
support for older Meson versions.
Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1245
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3061>
The AV1 support multi spatial layers within one TU with different
resolutions, and only the highest spatial layer need to be output.
For example, there are two spatial layer, base level is 800x600
and higher level is 1920x1080. We need to decode both because the
higher level needs base layer as reference, but we only need to output
1920x1080 frames here.
The current manner always renegotiates the caps once we detect the
current picture resolution changes, so we renegotiate again and
again between different layers. That's a big waste and has very
low performance. We now only do the renegotiation for the highest
output layer. For other non output layers, we just keep a internal
buffer pool which is big enough to handle the surface allocation.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2382>
As SPEC says, when multi spatial layer exists, we should only output
one frame with the highest spatial id from each TU. We now store the
highest spatial layer information in the base class in order to let
the sub class handle different layers easily.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2382>
doesn't align on 20 millisecond frame size.
The AMR-WB codec imposes a fixed 20 millisecond frame size. In its current
form, the `voamrwbenc` plugin deals with this limitation by discarding any
audio at the end of the stream that falls short of 20 milliseconds. This patch
keeps the audio data, and appends silence to the end to preserve frame size
alignment.
The patch also adds tests to check for the updated behavior. I noticed that
tests weren't being built, so I changed the build to allow for building the
tests when the `tests` and `voamrwbenc` options are set.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3027>
- Update the docker image we use, starting using the standard one adding
`gtk4-doc` as required by rust plugins
- Update the plugins_doc_caches as required, some more plugins are built
with the new image
- Install ninja from pip as the version from F31 is too old
- Avoid buildings all GSreamer plugins when building the doc as it takes
time and resources for no good reason
- Stop linking to `GInstanceInitFunc` as it is not present in latest GLib
documentation, leading to warnings in hotdoc.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2954>
Handle d3d11 device context in set_context() method with
additional device compatibility check so that only NVIDIA GPU
associated d3d11 device can be configured in the element.
And clear old d3d11 device per set_info() for d3d11 device to be
updated as well.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3018>
... and fix d3d11 specific enum type name
GST_CUDA_HAS_D3D is a build time define which indicates whether
GstD3D11 library is available or not, but DirectX SDK headers
must be available on the build system already.
Expose Direct3D related symbols if the build target is Windows
(i.e., if G_OS_WIN32 is defined)
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3018>
GLib made the unfortunate decision to prevent libgobject from ever being
unloaded, which means that now any library which registers a static type
can't ever be unloaded either (and any library that depends on those,
ad nauseam).
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/778>
GstVA is not currently build by CI, because libva version is lower
than expected. So, the gstva library is not build, thus some symbols
aren't documented, breaking the documentation CI.
To move things forward, let's just remove temporarly the va plugins
from cache. While we decide on how to update the libva package in
the CI.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1025>
When picking an available payload type, we need to pick one that is
available across all media.
The previous code, when multiple media were present, looked at the first one,
noticed it had pt 96 as the media pt, then simply looked at the next media,
noticed it didn't, and decided 96 was available.
Instead, check if the pt is used by any of the media, if it is, decide
it is not available and go to the next pt. I'm fairly sure that was the
original intent.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2984>
This avoids getting in a bunch of corner cases. We'd have to insert
a "rejected" line from the start as a place-holder to get around this,
but the rest of the code just becomes more complicated, so just
disallow it for now.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2439>
If the buffer is not msdk_buffer, we can try to directly import the
attached memory (i.e. va mem and dmabuf mem) by applying the common
uitl function: import_to_msdk_function ().
Here add a flag "from_qdata" in GstMsdkSurface to handle the cropping case,
we should avoid updating the crop values when msdk_surface is from the
memory's qdata, because the crop info from this surface is the already
updated one.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2498>
When input buffer is of dmabuf memory but not a msdk buffer (i.e., the
allocator is not msdk_allocator), then we can try to get fd of this mem,
create the corresponding va surface and wrap it as mfx surface.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2498>
