Original commit message from CVS:
Patch by: Sjoerd Simons <sjoerd at luon dot net>
* plugins/elements/gstqueue.c: (gst_queue_chain):
Recheck queue filledness after signalling the overrun when we're about
to leak downstream because we released the lock when emitting the signal
and the queue could be empty again. Fixes#352345.
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_set_caps):
Short-circuit gst_pad_set_caps if setting the existing
caps pointer again, and avoid printing debug and
reffing/unreffing the caps.
* plugins/elements/gstqueue.c: (gst_queue_push_one):
There's actually no need to set the caps before pushing -
the acceptcaps method will handle it anyway.
Original commit message from CVS:
* plugins/elements/gstcapsfilter.c: (gst_capsfilter_prepare_buf):
The caps intersection algorithm can produce multiple copies of the
caps. Until that is fixed, we need to simplify the result to be
sure whether the allowed caps are fixed or not.
* plugins/elements/gstqueue.c: (gst_queue_init),
(gst_queue_bufferalloc), (gst_queue_acceptcaps),
(gst_queue_push_one):
Proxied buffer alloc should not set the caps on the source pad.
When pushing buffers, we always accept the caps change that triggers.
This prevents negotiation errors caused by caps changing mid-stream
and then being refused on our source pad (because upstream is now
refusing those caps).
Original commit message from CVS:
* plugins/elements/gstqueue.c: (gst_queue_push_one):
The queue is not responsible for pushing an EOS when receiving a fatal
flow error. It's up to the real element driving the pipeline to do that.
Original commit message from CVS:
* plugins/elements/gstqueue.c: (gst_queue_push_one):
The queue was posting a non-needed GST_MESSAGE_ERROR when pushing a
buffer returned a fatal error. It should just send an EOS and stop
it's task.
Upstream elements will then properly receive the GST_FLOW_UNEXPECTED
when pushing buffers on the queue and will be able to handle the event.
Original commit message from CVS:
* plugins/elements/gstqueue.c: (gst_queue_chain), (gst_queue_loop),
(gst_queue_set_property):
Don't forget to signal the _chain or _loop function
when the queue size or thresholds change since that might
cause them to make progres again.
Original commit message from CVS:
Patch by Tommi Myöhänen <ext-tommi dot myohanen at nokia dot com>
* plugins/elements/gstqueue.c: (gst_queue_init),
(gst_queue_locked_flush), (gst_queue_handle_sink_event),
(gst_queue_set_property):
* plugins/elements/gstqueue.h:
In queue, when EOS is received, if minimum threshold > max_size -
current_level, there is chance that queue blocks forever in conditional item
del wait. This is because the queue is not emptied completely due to minimum
threshold.
Here is another approach. Instead of setting cur_levels to max in EOS, just
zero all minimum threshold levels. This should make sure that queue gives out
all data. When going to READY (stop) state, just reset the original minimum
threshold levels.
Fixes#336336.
Original commit message from CVS:
* gst/gstbin.c: (gst_bin_get_type), (gst_bin_handle_message_func):
Help the compiler a bit with type registration.
Use existing forward cod path instead of duplicating it when
handling a message.
* gst/gstbus.c: (gst_bus_get_type):
* gst/gstcaps.c: (gst_caps_get_type), (gst_static_caps_get_type):
* gst/gstchildproxy.c: (gst_child_proxy_get_type):
* gst/gstclock.c: (gst_clock_get_type):
* gst/gstelement.c: (gst_element_get_type),
* gst/gstelementfactory.c: (gst_element_factory_get_type):
* gst/gstindexfactory.c: (gst_index_factory_get_type):
* gst/gstminiobject.c: (gst_mini_object_get_type):
* gst/gstpad.c: (gst_pad_get_type):
* gst/gstsegment.c: (gst_segment_get_type):
* gst/gststructure.c: (gst_structure_get_type):
* gst/gstsystemclock.c: (gst_system_clock_get_type):
* gst/gsttask.c: (gst_task_get_type), (gst_task_join):
* gst/gstvalue.c:
Help compiler with type registration.
* plugins/elements/gstqueue.c: (gst_queue_handle_sink_event):
Small doc update.
Original commit message from CVS:
* gst/gstevent.c:
Fix docs typo
* plugins/elements/gstqueue.c: (gst_queue_handle_sink_event),
(gst_queue_chain), (gst_queue_push_one), (gst_queue_loop):
Do some refactoring. Doesn't actually change functionality,
but makes landing the DRAIN event easier later.
Original commit message from CVS:
* gst/gst.c: (init_post):
Init tags stuff and some other things before loading
any static plugins (there may be other static plugins
than just the GStreamer ones, and they may want to
register their own tags or formats or whatever, and
preferably without segfaulting).
* plugins/elements/gstqueue.c: (gst_queue_handle_src_query):
Print at least a warning in the debug logs if we drop a
query just because we don't know how to adjust the value
in the particular format.
Original commit message from CVS:
2005-12-05 Andy Wingo <wingo@pobox.com>
patch by: Wim Taymans <wim@fluendo.com>
* libs/gst/base/gstbasetransform.c
(gst_base_transform_prepare_output_buf)
(gst_base_transform_buffer_alloc):
* plugins/elements/gstqueue.c (gst_queue_bufferalloc): Call
alloc_buffer_and_set_caps.
* gst/gstpad.c (gst_pad_alloc_buffer): Changed to not call
set_caps on the source pad.
(gst_pad_alloc_buffer_and_set_caps): New function, does what
alloc_buffer used to do. Fixes#322874.
* docs/gst/gstreamer-sections.txt:
* docs/design/part-negotiation.txt:
* docs/pwg/advanced-negotiation.xml: Update for the alloc_buffer
changes.
Original commit message from CVS:
document core plugins in a separate document just like all the
others
rename these plugins to something starting with core
Original commit message from CVS:
* gst/gst.c:
* plugins/elements/Makefile.am:
* plugins/elements/gstelements.c:
* plugins/elements/gstqueue.c:
move queue from core to the elements plugin
ç
Original commit message from CVS:
* Makefile.am:
don't run checks if we don't have check
* common/check.mak:
remove the registry when running make torture
* docs/gst/gstreamer-sections.txt:
remove second multiply
* gst/gstqueue.c: (gst_queue_loop):
fix a compile warning when disabling debug
Original commit message from CVS:
* gst/elements/Makefile.am:
* gst/elements/gstfakesink.c: (gst_fake_sink_state_error_get_type):
* gst/elements/gstfakesrc.c: (gst_fake_src_data_get_type),
(gst_fake_src_sizetype_get_type), (gst_fake_src_filltype_get_type),
(gst_fake_src_init), (gst_fake_src_prepare_buffer),
(gst_fake_src_alloc_buffer), (gst_fake_src_get_size):
* gst/elements/gstfakesrc.h:
* gst/gstqueue.c: (queue_leaky_get_type):
correctly fix GEnumValues so that nick is the short lowercase
dashed tag
* tools/gst-inspect.c: (print_element_properties_info):
also show the nick, since it's useful to use from parse_launch
syntax
Fixes#322139
Original commit message from CVS:
2005-11-21 Andy Wingo <wingo@pobox.com>
* check/gst/gstevent.c (create_custom_events): Check that
FLUSH_STOP is serialized.
* check/elements/identity.c (event_func):
* check/elements/fakesrc.c (event_func): No stream lock, the core
takes it.
* gst/base/gstbasetransform.c (gst_base_transform_event): No more
stream lock taking, yay.
* gst/gstevent.h (GST_EVENT_FLUSH_STOP): Marked as serialized to
ensure that core takes the stream lock.
* gst/base/gstbasesrc.c (gst_base_src_do_seek): Update for stream
lock name change.
* gst/base/gstbasesink.c (gst_base_sink_event): No need to take
the stream lock for EOS, NEWSEGMENT, or FLUSH_STOP, the core does
it already. For the flush start we do take it though so we get the
right preroll state change messages.
* gst/gstqueue.c (gst_queue_sink_activate_push): No need to take
the stream lock here, the core does it for us.
* gst/gstpad.h (GST_PAD_GET_STREAM_LOCK): Renamed from
GST_STREAM_GET_LOCK.
(GST_PAD_STREAM_LOCK, GST_PAD_STREAM_TRYLOCK)
(GST_PAD_STREAM_UNLOCK, GST_PAD_STREAM_UNLOCK_FULL)
(GST_PAD_STREAM_LOCK_FULL): Renamed from GST_STREAM_*.
(GST_PAD_GET_PREROLL_LOCK): Renamed from GST_PREROLL_GET_LOCK.
(GST_PAD_PREROLL_LOCK, GST_PAD_PREROLL_TRYLOCK)
(GST_PAD_PREROLL_UNLOCK): Renamed from GST_PREROLL_*.
* gst/gstpad.c: Update for stream lock name change.
* gst/base/gstbasesink.c: Update for preroll lock name change.
Original commit message from CVS:
* check/Makefile.am:
Enable valgrind check that should work fine now.
* gst/elements/gsttypefindelement.c: (gst_type_find_element_init):
* gst/gstqueue.c: (gst_queue_init):
Fix memleaks in pad allocation.
Original commit message from CVS:
* gst/base/gstbasesrc.c: (gst_base_src_init):
* gst/elements/gsttypefindelement.c: (gst_type_find_element_init):
* gst/gstqueue.c: (gst_queue_init):
Free pad templates, fixes a couple of leaks.
Original commit message from CVS:
* gst/gstbus.c: (gst_bus_class_init):
Fix some typos.
* gst/gstqueue.c: (gst_queue_loop):
Don't assume a miniobject that isn't a buffer is an
event (it could be that there is a refcounting
problem somewhere and the pointer is stale and
refers to an already destroyed miniobject).
Original commit message from CVS:
2005-10-31 Andy Wingo <wingo@pobox.com>
* Boo!
* gst/gstqueue.c (gst_queue_chain): Fix downstream leaky mode.
* gst/gstobject.c (gst_object_dispatch_properties_changed): No
need to serialize property notifications on GLib 2.8. GLib 2.6 has
the possibility of deadlocks here if code calling notify() or
set() has a lock that can be taken in another notify handler (ABBA
with class lock and e.g. python GIL state lock).
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_class_init),
(gst_base_transform_init):
Don't leak class.
* gst/gstqueue.c: (gst_queue_handle_sink_event), (gst_queue_loop):
An EOS event marks the queue as completely filled.
Original commit message from CVS:
* gst/gstbus.c:
Doc fix.
* gst/gstqueue.c: (gst_queue_handle_sink_event), (gst_queue_chain),
(gst_queue_loop):
Fix potential deadlock when QUEUE_LOCK is taken before STREAM_LOCK.
Original commit message from CVS:
* gst/base/gstbasesink.c: (gst_base_sink_get_position),
(gst_base_sink_query):
Speed up current position calculation.
* gst/base/gstbasesrc.c: (gst_base_src_query),
(gst_base_src_default_newsegment):
Correctly set stream position in newsegment.
* gst/gstbin.c: (gst_bin_add_func), (add_to_queue),
(update_degree), (gst_bin_sort_iterator_next),
(gst_bin_sort_iterator_resync), (gst_bin_sort_iterator_free):
* gst/gstmessage.c: (gst_message_new_custom):
Clean up debugging info
* gst/gstqueue.c: (gst_queue_link_src), (gst_queue_chain),
(gst_queue_loop), (gst_queue_handle_src_query):
Pause task faster.
Original commit message from CVS:
* gst/base/gstbasesink.c: (gst_base_sink_commit_state),
(gst_base_sink_handle_object), (gst_base_sink_query), (do_playing):
* gst/base/gstbasesrc.c: (gst_base_src_query):
* gst/elements/gstfilesink.c: (gst_file_sink_query):
* gst/elements/gsttypefindelement.c:
(gst_type_find_handle_src_query), (find_element_get_length),
(gst_type_find_element_activate):
API change fix.
* gst/gstquery.c: (gst_query_new_position),
(gst_query_set_position), (gst_query_parse_position),
(gst_query_new_duration), (gst_query_set_duration),
(gst_query_parse_duration), (gst_query_set_segment),
(gst_query_parse_segment):
* gst/gstquery.h:
Bundling query position/duration is not a good idea since duration
does not change much and we don't want to recalculate it for every
position query, so they are separated again..
Base value in segment query is not needed.
* gst/gstqueue.c: (gst_queue_handle_src_query):
* gst/gstutils.c: (gst_element_query_position),
(gst_element_query_duration), (gst_pad_query_position),
(gst_pad_query_duration):
* gst/gstutils.h:
Updates for query API change.
Added some docs here and there.
Original commit message from CVS:
2005-09-02 Andy Wingo <wingo@pobox.com>
* gst/gstelement.h (GstState): Renamed from GstElementState,
changed to be a normal enum instead of flags.
(GstStateChangeReturn): Renamed from GstElementStateReturn, names
munged to be GST_STATE_CHANGE_*.
(GST_STATE_CHANGE): Renamed from GST_STATE_TRANSITION, updated to
work with the new state representation.
(GstStateChange): New enumeration of possible state transitions.
Replaces GST_STATE_FOO_TO_BAR with GST_STATE_CHANGE_FOO_TO_BAR.
(GstElementClass::change_state): Pass the GstStateChange along as
an argument. Helps language bindings, so they don't have to use
tricky lock-needing macros like GST_STATE_CHANGE ().
* scripts/update-states (file): New script. Run it on a file to
update it for state naming and API changes. Updates files in
place.
* All files updated for the new API.
Original commit message from CVS:
* check/generic/states.c: (GST_START_TEST):
Make sure all tasks are stopped.
* check/gst/gstbin.c: (GST_START_TEST):
Unref after usage for proper valgrinding.
* gst/gstpad.c: (gst_pad_finalize), (gst_pad_stop_task):
Really wait for the task to stop before destroying the
mutex.
* gst/gstqueue.c: (gst_queue_sink_activate_push),
(gst_queue_src_activate_push):
Small cleanups. Don't stop the task when we did not start
it.
* gst/gsttask.c: (gst_task_get_type), (gst_task_init),
(gst_task_func), (gst_task_cleanup_all), (gst_task_set_lock),
(gst_task_get_state), (gst_task_start), (gst_task_pause),
(gst_task_join):
* gst/gsttask.h:
Protect the stream lock with the object lock.
Disallow setting the stream lock when running.
Add cleanup_all to wait for the threadpool to finish.
Remove code to autoallocate a mutex if none was provided.
Add _join() to wait for a task to stop.
Protect the thread pool with a global lock.
Original commit message from CVS:
* gst/base/gstbasesink.c: (gst_base_sink_handle_object):
Remove extra parameter to debug output
* gst/base/gstbasesrc.c: (gst_base_src_send_discont),
(gst_base_src_do_seek), (gst_base_src_activate_push):
Fix seek event handling.
* gst/gstpipeline.c: (gst_pipeline_change_state):
* gst/gstqueue.c: (gst_queue_handle_sink_event),
(gst_queue_src_activate_push):
Don't start the src pad task on FLUSH_STOP if the pad
isn't linked.
Debug changes.
Original commit message from CVS:
* check/Makefile.am:
* check/gst/gstevents.c: (GST_START_TEST), (event_probe),
(test_event), (timediff), (gstevents_suite), (main):
I wrote a test!
* docs/design/part-seeking.txt:
Spelling correction
* docs/gst/tmpl/gstevent.sgml:
Docs updates.
* gst/base/gstbasesink.c: (gst_base_sink_handle_object):
Treat a buffer-without-newsegment the same as a receiving
a newsegment not in time format, and disable syncing to the clock
with a warning.
* gst/gstbus.c: (gst_bus_set_sync_handler):
Assert if anyone tries to replace the existing sync_handler for bus,
as only the owner should be setting it.
* gst/gstevent.h:
Have a fixed set of custom event enums with events identified by
their structure name (as in 0.8), rather than a free-for-all
allowing collisions between enum values from different plugins.
* gst/gstpad.c: (gst_pad_class_init):
Docs change.
* gst/gstqueue.c: (gst_queue_handle_sink_event):
Handle out-of-band downstream events from the sending thread.
Original commit message from CVS:
* docs/design/part-seeking.txt:
Some small additions.
* gst/base/gstbasesink.c: (gst_base_sink_handle_object),
(gst_base_sink_get_times), (gst_base_sink_do_sync),
(gst_base_sink_activate_push), (gst_base_sink_activate_pull):
* gst/base/gstbasesink.h:
discont values are gint64, handle the math correctly.
* gst/base/gstbasesrc.c: (gst_base_src_loop):
Make the basesrc report error if the source pad is not linked.
* gst/gstqueue.c: (gst_queue_link_src), (gst_queue_chain),
(gst_queue_loop), (gst_queue_handle_src_query),
(gst_queue_src_activate_push):
Make queue collect data even if the srcpad is not linked.
Start pushing out data as soon as it is linked.
* gst/gstutils.c: (gst_element_unlink), (gst_flow_get_name):
* gst/gstutils.h:
Added gst_flow_get_name() to ease error reporting.
Original commit message from CVS:
* gst/base/gstbasesrc.c: (gst_base_src_init),
(gst_base_src_do_seek), (gst_base_src_loop), (gst_base_src_start):
* gst/base/gstbasesrc.h:
Add a gboolean to decide when to push out a discont.
* gst/gstqueue.c: (gst_queue_handle_sink_event), (gst_queue_chain),
(gst_queue_loop), (gst_queue_handle_src_query),
(gst_queue_sink_activate_push), (gst_queue_src_activate_push),
(gst_queue_set_property), (gst_queue_get_property):
Some cleanups.
* tests/threadstate/threadstate1.c: (main):
Make a thread test compile and run... very silly..
Original commit message from CVS:
* gst/gstqueue.c: (gst_queue_init), (gst_queue_handle_sink_event),
(gst_queue_chain), (gst_queue_loop), (gst_queue_handle_src_event),
(gst_queue_handle_src_query), (gst_queue_sink_activate_push),
(gst_queue_src_activate_push), (gst_queue_change_state),
(gst_queue_get_property):
* gst/gstqueue.h:
Propagate GstFlowReturn more intelligently upstream and output
an ERROR/EOS when streaming stopped due to fatal error.
Original commit message from CVS:
2005-06-27 Andy Wingo <wingo@pobox.com>
* gst/base/gsttypefindhelper.c (gst_type_find_helper): Unref any
remaining buffer.
* gst/gsttrace.c (gst_alloc_trace_list_sorted): New helper,
returns a sorted copy of the trace list.
(gst_alloc_trace_print_live): New API, only prints traces with
live objects. Sort the list.
(gst_alloc_trace_print_all): Sort the list.
(gst_alloc_trace_print): Align columns.
* gst/elements/gstttypefindelement.c:
* gst/elements/gsttee.c:
* gst/base/gstbasesrc.c:
* gst/base/gstbasesink.c:
* gst/base/gstbasetransform.c:
* gst/gstqueue.c: Adapt for pad activation changes.
* gst/gstpipeline.c (gst_pipeline_init): Unref after parenting
sched.
(gst_pipeline_dispose): Drop ref on sched.
* gst/gstpad.c (gst_pad_init): Set the default activate func.
(gst_pad_activate_default): Push mode by default.
(pre_activate_switch, post_activate_switch): New stubs, things to
do before and after switching activation modes on pads.
(gst_pad_set_active): Take a boolean and not a mode, dispatch to
the pad's activate function to choose which mode to activate.
Shortcut on deactivation and call the right function directly.
(gst_pad_activate_pull): New API, (de)activates a pad in pull
mode.
(gst_pad_activate_push): New API, same for push mode.
(gst_pad_set_activate_function)
(gst_pad_set_activatepull_function)
(gst_pad_set_activatepush_function): Setters for new API.
* gst/gstminiobject.c (gst_mini_object_new, gst_mini_object_free):
Trace all miniobjects.
(gst_mini_object_make_writable): Unref the arg if we copy, like
gst_caps_make_writable.
* gst/gstmessage.c (_gst_message_initialize): No trace init.
* gst/gstghostpad.c (gst_proxy_pad_do_activate)
(gst_proxy_pad_do_activatepull, gst_proxy_pad_do_activatepush):
Adapt for new pad API.
* gst/gstevent.c (_gst_event_initialize): Don't initialize trace.
* gst/gstelement.h:
* gst/gstelement.c (gst_element_iterate_src_pads)
(gst_element_iterate_sink_pads): New API functions.
* gst/gstelement.c (iterator_fold_with_resync): New utility,
should fold into gstiterator.c in some form.
(gst_element_pads_activate): Simplified via use of fold and
delegation of decisions to gstpad->activate.
* gst/gstbus.c (gst_bus_source_finalize): Set the bus to NULL,
help in debugging.
* gst/gstbuffer.c (_gst_buffer_initialize): Ref the buffer type
class once in init, like gstmessage. Didn't run into this issue
but it seems correct. Don't initialize a trace, gstminiobject does
that.
* check/pipelines/simple_launch_lines.c (test_stop_from_app): New
test, runs fakesrc ! fakesink, stopping on ::handoff via a message
to the bus.
(assert_live_count): New util function, uses alloc traces to check
cleanup.
* check/gst/gstghostpad.c (test_ghost_pads): More refcount checks.
To be modified when unlink drops the internal pad.
Original commit message from CVS:
2005-06-08 Andy Wingo <wingo@pobox.com>
* gst/gstutils.c: RPAD fixes all around.
(gst_element_link_pads): Refcounting fixes.
* tools/gst-inspect.c:
* tools/gst-xmlinspect.c:
* parse/grammar.y:
* gst/base/gsttypefindhelper.c:
* gst/base/gstbasesink.c:
* gst/gstqueue.c: RPAD fixes.
* gst/gstghostpad.h:
* gst/gstghostpad.c: New ghost pad implementation as full proxy
pads. The tricky thing is they provide both source and sink
interfaces, since they proxy the internal pad for the external
pad, and vice versa. Implement with lower-level ProxyPad objects,
with the interior proxy pad as a child of the exterior ghost pad.
Should write a doc on this.
* gst/gstpad.h: s/RPAD/PAD/, s/RealPad/Pad/.
(gst_pad_set_name, gst_pad_set_parent): Macros removed, use
gst_object API.
* gst/gstpad.c: Big changes. No more stub base GstPad, now all
pads are real pads. No ghost pads in this file. Not documenting
the myriad s/RPAD/PAD/ and REALIZE fixes.
(gst_pad_class_init): Add properties for "direction" and
"template". Both are construct-only, so they can't change during
the life of the pad. Fixes properly deriving from GstPad.
(gst_pad_custom_new, gst_pad_custom_new_from_template): Gone. For
derived objects, just set properties when creating the objects via
g_object_new.
(gst_pad_get_parent): Implement as a function, return NULL if the
parent is not an element.
(gst_pad_get_real_parent, gst_pad_add_ghost_pad)
(gst_pad_remove_ghost_pad, gst_pad_realize): Removed.
* gst/gstobject.c (gst_object_class_init): Make name a construct
property. Don't set it in the object init.
* gst/gstelement.c (gst_element_add_pad): Don't allow adding pads
with UNKNOWN direction.
(gst_element_add_ghost_pad): Remove non-orthogonal API. Replace
with gst_element_add_pad (e, gst_ghost_pad_new (name, pad)).
(gst_element_remove_pad): Remove ghost-pad special cases.
(gst_element_pads_activate): Remove rpad cruft.
* gst/gstbin.c (gst_bin_change_state): Use gst_pad_get_parent to
catch the pad's-parent-not-an-element case.
* gst/gst.h: Include gstghostpad.h.
* gst/gst.c (init_post): No more real, ghost pads.
* gst/Makefile.am: Add gstghostpad.[ch].
* check/Makefile.am:
* check/gst/gstbin.c:
* check/gst/gstghostpad.c (test_ghost_pads): Check that linking
into a bin creates ghost pads, and that the refcounts are right.
Partly moved from gstbin.c.
Original commit message from CVS:
* gst/gstqueue.c: (gst_queue_handle_sink_event), (gst_queue_chain),
(gst_queue_loop), (gst_queue_handle_src_event):
Remove old pieces of code
Flushing the queue in an upstream event is a very bad idea.
Original commit message from CVS:
* gst/gstbin.c: (bin_element_is_sink), (has_ancestor),
(bin_element_is_semi_sink), (append_child), (gst_bin_change_state):
* gst/gstpad.c: (gst_pad_set_active), (gst_pad_link_prepare),
(gst_pad_link), (gst_pad_accept_caps), (gst_pad_query),
(gst_pad_send_event), (gst_pad_start_task):
* gst/gstqueue.c: (gst_queue_init), (gst_queue_locked_flush),
(gst_queue_handle_sink_event), (gst_queue_chain), (gst_queue_loop),
(gst_queue_sink_activate), (gst_queue_src_activate),
(gst_queue_change_state):
* gst/gstqueue.h:
Fix state changes for non sinks. We now change sinks, then elements
with unconnected srcpads, then the rest.
More efficient queue unlocking in flush and state changes.
Set the pad activate mode even if it does not have an activate
function.
Original commit message from CVS:
* gst/base/gstbasesink.c: (gst_basesink_finish_preroll),
(gst_basesink_chain_unlocked), (gst_basesink_activate):
* gst/gstminiobject.c: (gst_mini_object_get_type),
(gst_mini_object_free):
* gst/gstpad.c: (gst_pad_accept_caps), (gst_pad_query),
(gst_pad_push), (gst_pad_push_event):
* gst/gstqueue.c: (gst_queue_change_state):
Don't queue buffers in basesink when we are flushing.
Unref buffer when flushing in basesink.
Flush queue when going to READY
Unref buffer when _push() returns an error.
Don't free MiniObject instance when refcount is incremented
in _finalize() so that we can recover objects.
Original commit message from CVS:
Remove old query functions. Ported old code.
Added position/convert helper functions to gstutils.
Reordered gstpad.c code, grouping relevant things.
Remove gst_message_new(), always need to speficy a specific
message.
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_proxy_getcaps):
* gst/elements/gstcapsfilter.c: (gst_capsfilter_getcaps):
* gst/gstpad.c: (gst_pad_peer_get_caps):
* gst/gstqueue.c: (gst_queue_init), (gst_queue_getcaps),
(gst_queue_bufferalloc), (gst_queue_handle_sink_event),
(gst_queue_src_activate), (gst_queue_change_state):
* gst/gstqueue.h:
* gst/gstutils.c: (gst_element_get_compatible_pad_template),
(intersect_caps_func):
Fix gst_pad_peer_get_caps(), make it return NULL if no peer.
Always take QUEUE_LOCK after STREAM_LOCK or we might deadlock.
Some fixes for the peer_get_caps() change.
Original commit message from CVS:
Next big merge.
Added GstBus for mainloop integration.
Added GstMessage for sending notifications on the bus.
Added GstTask as an abstraction for pipeline entry points.
Removed GstThread.
Removed Schedulers.
Simplified GstQueue for multithreaded core.
Made _link threadsafe, removed old capsnego.
Added STREAM_LOCK and PREROLL_LOCK in GstPad.
Added pad blocking functions.
Reworked scheduling functions in GstPad to prepare for
scheduling updates soon.
Moved events out of data stream.
Simplified GstEvent types.
Added return values to push/pull.
Removed clocking from GstElement.
Added prototypes for state change function for next merge.
Removed iterate from bins and state change management.
Fixed some elements, disabled others for now.
Fixed -inspect and -launch.
Added check for GstBus.
Original commit message from CVS:
Remove threadsafe properties. Fix elements because GObject
complains when installing a property before declaring a
set/get_property handler.
Rearrange gstelement.h file, use STATE macros for state locks.
Free mutexes in the finalize method instead of dispose.
Original commit message from CVS:
First THREADED backport attempt, focusing on adding locks and
making sure the API is threadsafe. Needs more work. More docs
follow this week.
Original commit message from CVS:
* gst/gstbin.c: (gst_bin_remove_func):
Explicitely make an element release locks in a group when being
remove from a bin.
* gst/gstqueue.c: (gst_queue_chain), (gst_queue_get):
If there's no scheduler, always return immediately (similar to
gst_element_interrupt).
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
* docs/gst/tmpl/gstevent.sgml:
* gst/gstevent.c: (gst_event_new_filler_stamped),
(gst_event_filler_get_duration):
* gst/gstevent.h:
Add two new functions for filler events (which are used to
synchronize streams if one of them is not having any data
for a while) without interrupting the actual data-stream.
Basically a no-op.
* gst/gstqueue.c: (gst_queue_init), (gst_queue_getcaps),
(gst_queue_link_sink), (gst_queue_link_src),
(gst_queue_change_state):
Allow for renegotiation while filled. Required for stream
switching while playing.
Original commit message from CVS:
* gst/gstqueue.c: (gst_queue_init), (gst_queue_getcaps),
(gst_queue_link), (gst_queue_handle_src_query):
Reverted to 1.110 until this makes the testsuite and various
apps work.
Original commit message from CVS:
* gst/gstcaps.c: (gst_caps_is_fixed_foreach):
* gst/gstpad.c: (_gst_pad_default_fixate_value),
(_gst_pad_default_fixate_foreach):
* gst/gstvalue.c: (gst_type_is_fixed), (gst_value_is_fixed):
* gst/gstvalue.h:
Deprecate _type_is_fixed, use _value_is_fixed instead, since
in some cases (arrays), the fixedness depends on the content.
* gst/gstqueue.c: (gst_queue_handle_src_query):
Check for availability before doing something.
Original commit message from CVS:
2004-11-24 Martin Soto <martinsoto@users.sourceforge.net>
* gst/gstqueue.c (gst_queue_link_sink): Grab the lock only when
it is necessary to wait.
Original commit message from CVS:
2004-11-23 Martin Soto <martinsoto@users.sourceforge.net>
* gst/gstqueue.c (gst_queue_init, gst_queue_link_sink)
(gst_queue_link_src): Allow for renegotiating the caps of the sink
pad. The queue will now wait until it is empty and forward the new
caps to the source.
* gst/gstbin.c (gst_bin_set_element_sched)
(gst_bin_unset_element_sched): Make sure that all elements and
links are registered and unregistered with the scheduler exactly
once. This elaborates on a fix by Benjamin Otte, but
guarantees that decoupled elements are also registered.
Original commit message from CVS:
* gst/gstqueue.c: (gst_queue_init), (gst_queue_handle_src_query):
Subtract current queue contents from position queries.
Original commit message from CVS:
* gst/gstqueue.c: (gst_queue_dispose), (gst_queue_change_state):
fix memory leaks (fixes#142795). Initial patch by Sebastien Cote
* libs/gst/bytestream/adapter.c:
* libs/gst/bytestream/adapter.h:
fix copyright in header and typo in debugging category name
Original commit message from CVS:
* gst/elements/gstfilesrc.c: (gst_filesrc_get_mmap):
compute mapsize correctly
* gst/elements/gstfilesrc.c: (gst_filesrc_get_mmap):
use correct datatypes when calling a varargs function
* gst/elements/gsttypefindelement.c: (stop_typefinding):
push a DISCONT event as first thing
* gst/gst_private.h:
* gst/gstinfo.c: (_gst_debug_init):
remove GST_DATAFLOW debugging category
* gst/gstbin.c: (gst_bin_iterate):
use GST_SCHEDULING category
* gst/gstpad.c: (gst_pad_get_type), (_invent_event),
(gst_pad_push), (gst_pad_pull), (gst_pad_call_chain_function),
(gst_pad_call_get_function):
add GST_DATAFLOW to easily track flow of buffers or events.
* gst/gstqueue.c: (gst_queue_get_type),
(gst_queue_handle_pending_events), (gst_queue_chain),
(gst_queue_get), (gst_queue_handle_src_event):
use own static debugging category GST_DATAFLOW for dataflow,
use DEBUG category for showing which path events go, use LOG
category for buffers.
Original commit message from CVS:
* gst/gstqueue.c: (gst_queue_init):
Reset default max. values in queues. Reason is simply to avoid
braindead use. If you want wider values, use the properties. The
default is supposed to always work. Wider values would make this
beast a memory hog by default (250 full-PAL RGB32 video frames?
That's 440 MB! No thank you).
Original commit message from CVS:
2004-02-15 Julien MOUTTE <julien@moutte.net>
* gst/gstbin.c: (gst_bin_change_state), (gst_bin_iterate): Fix a big
bug that was breaking pipelines like sinesrc ! { queue ! osssink } when
an error was thrown by osssink. Basically a state change failure for
an element in a different scheduling group was considered as successfull , which means that caps nego was going on and weird stuff happened. Like i wrote in the comment there, if someone want to revert that please
drop me a mail explaining why because i really see no point in keeping
that broken behaviour there.
* gst/gstqueue.c: (gst_queue_get): Add a safety check as the queue CAN
be empty, we then return NULL which will trigger a nice error when
pulling from the pad.
Original commit message from CVS:
2004-02-09 Julien MOUTTE <julien@moutte.net>
* gst/gstdata.c: (gst_data_ref): Adding a categorized debug on data_ref
because data_unref has one and i prefer the debug to be symetric.
* gst/gstqueue.c: (gst_queue_locked_flush): Fix a huge memleak. Buffers
were refed when added to the queue and unrefed only once when the queue
was flushed. Now the flush handler unref the buffers two times : first
unref for the ref added when pushing in the queue's tail and second
unref to destroy the flushed buffer.
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_try_set_caps_nonfixed):
* gst/gstpad.h: Add new function to allow element to (somewhat)
specify non-fixed caps on a pad.
* gst/gstqueue.c: (gst_queue_chain): Remove noisy g_object_notify()
that I added a few weeks ago.
Original commit message from CVS:
2004-01-14 Benjamin Otte <in7y118@public.uni-hamburg.de>
* gst/gstqueue.c: (gst_queue_getcaps), (gst_queue_link):
query if buffers are inside the pool, ignore events
Original commit message from CVS:
* gst/elements/gstfilesrc.c: (gst_filesrc_free_parent_mmap),
(gst_filesrc_map_region):
* gst/gstbuffer.c: (_gst_buffer_initialize),
(_gst_buffer_sub_free), (gst_buffer_default_copy),
(gst_buffer_new), (gst_buffer_create_sub),
(gst_buffer_is_span_fast), (gst_buffer_span):
* gst/gstbuffer.h:
Change GstBuffer private structure element names. (all files)
* gst/gstqueue.c: (gst_queue_init), (gst_queue_getcaps),
(gst_queue_link):
* gst/gstqueue.h:
Implement getcaps/pad_link functions that handle the case where
there are data in the queue.
Original commit message from CVS:
2004-01-11 Benjamin Otte <in7y118@public.uni-hamburg.de>
* gst/gstqueue.c: (gst_queue_init):
Use better defaults for when a queue should block. This
gets rid of jerky playback for quite a few files.
It takes more memory.
Original commit message from CVS:
2003-12-31 Ronald Bultje <rbultje@ronald.bitfreak.net>
* gst/gstqueue.c: (gst_queue_init):
use gst_pad_proxy_getcaps()
Original commit message from CVS:
2003-12-21 Ronald Bultje <rbultje@ronald.bitfreak.net>
* gst/gstqueue.c: (gst_queue_handle_pending_events),
(gst_queue_chain), (gst_queue_handle_src_event):
implement timeout for sending events. Workaround for if the
pipeline on this queue is not passing any data.
Original commit message from CVS:
Fix a deadlock that happens if the next element sends an event and the previous element sends a buffer where the queue is full. See the comment in the code for the rest.
Original commit message from CVS:
This is either a rewrite or a large bugfix to the queue element, whatever
you prefer to call it.
* upstream event forwarding now works. This should fix Julien's issues.
* this queue allows setting a min. treshold size and a max. limit size
in bytes, buffers and time before the queue allows the next element
to pull data or the previous element to push data into it. This is
very interesting for network-related buffering. Also includes signals
et all for the end user application.
* Events are no longer part of the queue's "size", they're essentially
seen as "void data". they have no size or time associated with them
anyway, so this shouldn't really sound weird.
Original commit message from CVS:
s/GstBuffer/GstData/ in the API where you can pass events. Fix the plugins to deal with that. Fixes#113488. Also includes scheduler patches, and probably fixes some queue bugs relating to events and buffers.
Original commit message from CVS:
implement translatable error messages using gerror.
Includes bugfixes for:
- crash when unlinking Ghostpads
- make *_PAD_* macros use glib casts
- make spider typefinding merge buffers correctly
Original commit message from CVS:
GST_DEBUG reorganization
This is a big diff (ca 450k), containing loads of stuff:
- gstinfo.[ch] complete rewrite
- changing of all GST_DEBUG messages to reflect that change
- reorganization of subsystem disabling
- addition of gstconfig.h.in so we can track the disablings
- <gst/gst.h> does not include <unistd.h> and <config.h> anymore
- documentation updated for gstinfo stuff (build the docs yourself to know what changed)
- bugfixes for making of the docs (files from CVS are not deleted anymore
- testsuite for debugging changes in testsuite/debug
expect breakage
Original commit message from CVS:
Add patch for better buffering (especially useful for network streaming), see #108268 - kudos go to janzen@pixelmetrix.com
Original commit message from CVS:
Ouch: gst_element_dispose does a state change to NULL. Change the state to NULL yourself if you dispose plugins that reference some of the freed memory on state changes.
This is probably broken in lots of cases.
Original commit message from CVS:
- Proxy the get_caps function slightly differently. This is potentially
dangerous as it works quite differently. My tests seem to work though and
it fixes the play-multi-file-segfault in the player.
Original commit message from CVS:
Provide intrastructure to not have to pass NULL buffers on errors and
interrupts, this should fix some issues with the optimal scheduler.
Original commit message from CVS:
- Make the return GList of gst_element_get_pad_list as const
- Pad scheduler refactoring
- Remove gst_pad_set/unset_scheduler as it's not needed
- Reimplement gst_pad_get_scheduler using the parent scheduler
- Remove gst_pad_peek as it cannot work reliably
- Remove the pad bufpen, replace with scheduler private gpointer
- Make queue use the new _get_scheduler implementation
- Remove _pad_unset_scheduler from GstScheduler
- Remove LOOP_SEEK mode from aggregator
- Other fixes for API changes.
Original commit message from CVS:
- Removed bufferpool code and move that to gstbuffer.c
- implemented refcounting on GstData
- implemented new buffer code based on Company's work in the EVENTS2 branch
- added boxed types for GstData/GstEvent/GstBuffer/GstBufferPool
- added refcounting to bufferpools and events
- use lockfree allocation for buffers
- simplified the clock, use lockfree allocation
- use GQueue in GstQueue for faster access to the tail element
- update core plugins to the new event API
Original commit message from CVS:
Whan the buffer is filled, the buffer is kept and added to the queue
when there is room again. Don't do this after a flush.
Original commit message from CVS:
put upstream events in an async queue and resend them at the start of the chain. not working as expected yet but a start
Original commit message from CVS:
add an optional timeout for when queue blocks. when timeout is reached a GST_EVENT_FILLER is sent downstream
This is needed for gst-player since videosink has to be in the same thread as the ui, and spider blocks when there is no video (thus freezing the ui).
Original commit message from CVS:
Created an overridable method for seeking on an element, along with a default
implementation.
make queue flush on discont (not entirely correct)
removed the new_media from the discont event.
Original commit message from CVS:
- The clock_wait now returns the difference between requested time and
unlock time.
- Misc defines like GST_SECOND in gstclock.h
- remove pre/post in gstelement.c until fixed.
- added release_locks to gstelement so that the element can unlock itself
- added some more predefined events.
- added folowing functions to gstpad:
- convert function: get the relation between formats on this pad
- query function: get stats about the pad (position/total/latency)
- internal connect function: find out how this pad connects to other
pad internally to the element.
- generic pad_dispatcher.
- removed the last bits of pullregion
- use release_locks on the queue.
- added some events to queue
- make gstthread use the new release_locks function
- make the scheduler use the new clock_wait functions
- added events to fakesink
- added query functions to filesrc
- swap type and offset in the bytestream seek API to match fseek
- added some event handling in bytestream.
Original commit message from CVS:
* a hack to work around intltool's brokenness
* a current check for mpeg2dec
* details->klass reorganizations
* an element browser that uses details->klass
* separated cdxa parse out from the avi directory
Original commit message from CVS:
- Remove the propsprivate header file
- Added new API for properties.
- Moved the clock distribution to the scheduler.
- Removed the lock from GstCaps
- Added boxed types for Caps/Props
- Simplified the clock, new systemclock implementation
- Removed deprecated element_info/send_event functions
- First step at exposing more info in the pad_connect functions
- Queue cleanup
- Make the scheduler aware of other schedulers inside it
- Added the _SELF_SCHEDULABLE flag to gstthread
- Removed _get_widget from _utils, changed to new props API
- Make fakesink sync on timestamps when requested
- Removed the offset notify from filesrc
- Added a fast scheduler
- some scheduler cleanups.
Original commit message from CVS:
* removal of //-style comments
* don't link plugins to core libs -- the versioning is done internally to the plugins with the plugin_info struct,
and symbol resolution is lazy, so we can always know if a plugin can be loaded by the plugin_info data. in theory.
Original commit message from CVS:
Landed the new improved capsnegotiation system.
The main idea is to keep track of the possible data types that can
pass through a connection. plugins can at any time inspect, adjust and
refine these caps. plugins also get notified when something changes to
the types so that they can reconfigure themselves.
Look at the updated plugins and the soon to be finished doc.
Original commit message from CVS:
summary: fix xml in gstreamer
1) make clear distinction between loading xml that actually creates objects and loading xml that just
synchronizes properties with objects. moved most of gst_element_restore_thyself functionality to
gst_xml_make_element. this new function name can change if it sucks.
2) many various fixes. createxml and runxml work now.
3) doc updates.
4) GstSignalObject is stil broken. i have no idea what it's supposed to do.
Original commit message from CVS:
- Removed deprecated buffer flags.
- removed gst_element_signal_eos, replaced with gst_element_set_eos
to set the object to PAUSED, signal an eos event etc..
- small updates to documentation
- repair some plugins
Original commit message from CVS:
- Added a function to get the currently executing cothread
- Removed some useless includes
- _interrupt now returns a boolean so the behaviour after the interrupt
can be controlled by the scheduler.
- Added a better way to set/get the default scheduler.
- make thread and pipeline get the default scheduler.
Original commit message from CVS:
Better, cleaner state management of the scheduler by adding scheduler state
flags.
typefind has to interrupt instead of yield.
Fix a leak in the queue when it's dropping buffers.
Original commit message from CVS:
This is an attempt at not segfaulting on errors but reporting some
usefull info instead.
- bin changes so errors can propagate.
- changed the _FAST macros to _CAST because that is what they do.
- removed all references to cothreads out of the core, they are
really a scheduler issue, handler with a sched_private gpointer.
- added a live buffer count, for debugging buffer leaks.
- added error checking in gst_scheduler_state_transition this solves the
"out of cothreads" problem.
- GST_ELEMENT_NO_ENTRY == GST_ELEMENT_INFINITE_LOOP
- added 2 private element flasg for use by the scheduler
(_COTHREAD_STOPPING) is now
- added scheduler entry points:
- _yield : to create possible scheduling points.
- _interrupt: to stop execution of an element.
- _error: to signal en error condition to the scheduler.
- improved error messages for pads.
- signal gst_element_error where appropriate.
- added the a new bin to the parent before entering it so one can reference
its children.
- queue memleak fixes on dispose.
- added possible deadlock detection in queue (turned off be default)
- GstBasicScheduler is a real class of its own now, hiding its internal
variables.
- GST_ELEMENT_IS_COTHREAD_STOPPING is gone. either call explicit _yield
operations, or make a sane loop.
- Better state change handling in filesrc. Better error reporting/recovery
too.
- updated core plugins.
- detect non decoupled elements on scheduler boundries and error.
Original commit message from CVS:
- Reclaim cothread state even if the cothread was never activated after
the free.
- fix the bin state change when there are no more children.
- use a real method to signal the parent bin of a state change.
- move the state change policy in the scheduler.
- remove the unused and ridiculous state change event
- don't free the cothread state when the element is disabled. only free it
when the element is removed from the scheduler.
Original commit message from CVS:
cothread cleanup.
- removed some old code.
- ran the thing through indent
- rename cothread_init/free to cothread_context_init/free
- implement cothread_free/destroy to clear the cothread_state slot
- make cothread_init reuse empty slots.
minor cleanups in error reporting (gstpad, gstelement)
code cleanup in gstthread
make unexpected state changes in gstthread less fatal
free the cothread_state in the scheduler.
This one passes all the current cvs testcases including dynamic-pipeline.
Original commit message from CVS:
- Elements can now send events to their parent.
- remove the g_signals from the core for parent<->child communication
- the application can easily get element info by listening for an event
signal from the toplevel bin.
- added gst_element_info()/_error().
- fakesrc and fakesink use the info event instead of g_print.
- GST_TYPE_* causes segfaults with elect fence, rever to G_TYPE_POINTER
until we know what's wrong.
- various leaks fixed wrt element destroy.
- The object that created the event is now stored as GST_EVENT_SRC
Original commit message from CVS:
- added playondemand plugin by Leif Morgan Johnson <lmjohns3@eos.ncsu.edu>
- some fixes to int2float
- aplied a patch from wrobell <wrobell@ite.pl> that is a first attempt at
making automake 1.5 happy (gst now requires automake1.5). It's still not
perfect but it builds.
- Made the schedulers plugable. The default scheduler now lives inside a
plugin.
- Added a new mpeg1/2 parser/demuxer.
- Fixed some compiler warnings in the core libs.
- substantial work to GstThread (hopefully less race conditions). simplified
the code in GstThread a bit. A state change can now also happen in the
thread context.
- reworked the state semantics of a bin. it'll now automatically get the
highest state of its children.
- the autoplugger now nests the threads so that a state change failure of
one thread doesn't make its upstream thread lock.
- GstQueue refuses to go to PLAYING if the sinkpad is not connected. This
way the queue will not wedge in the _get lock.
- GstQueue unlocks its mutexes when going to PAUSED.
- make sure that when all elements in a bin/thread go to PAUSED, the bin
is set to PAUSED too.
- make a parent bin wait for its children to PAUSE before ending the
iteration with FALSE (EOS)
- Some changes to GstPlay to deal with EOS.
- aplied the latest patch from Zeenix to gstrtp.
end result: GstPlay doesn't crash on EOS and the pipeline is now shut down
properly.
Original commit message from CVS:
1. Add more warnings for the gst core only. Various trival fixes
to quiet the warnings.
2. Fix GstBufferCopyFunc prototype.
3. Re-apply the reverted type!=0 assertion in gst_elementfactory_new.
Original commit message from CVS:
Lots of modifications to the plugin system.
- Added a GstPluginfeature object that serves as a base class for all
plugin contents.
- changed the plugin API, everyhting is now added with
gst_plugin_add_feature
- typefactories are named now so that they can be located easily and filled
in at plugin load.
- mime types like "video/raw image/raw" are gone for now.
- lots of plugin updates (style and API changes)
- tested with an without registry.
- updates to various tools.
- added a little testsuite to test/show how you can load plugins (4 modes)
Test this one, Almost everything has changed :-)
Original commit message from CVS:
Lots of updates to the plugins for caps negotiation.
Added YUY2 output to the win32 dlls.
Added a colorspace converter in gstplay
Original commit message from CVS:
More work on capsnego proxying. It should be OK now.
Added another testcase enum that shows various capsnego algorithms.
Warn about pads that try to set a capability incompatible with their
padtemplate.
Implemented refcounting and copy_on_write for caps/props.
Original commit message from CVS:
More work on capsnego, mostly proxying
Added another testsuite for capsnego
Added caps to vorbisdec, mp3parse, mp1videoparse
Redid the queue proxy handling a bit.
Original commit message from CVS:
Reworked the capsnegotiation function
audiosink now uses capsnego to set its parameters
mpg123/ac3dec use capsnego instead of metadata
Added the beginnings of a testsuite for capsnego.
Original commit message from CVS:
This is a megapatch with the following changes:
- moved the gchar *name to GstObject, removed the ones in GstElement and
GstPad.
- moved the parent handling completely into GstObject. This cause *all* of
the plugins to fail (except those that used gst_pad_get_parent)
- rearanged the XML save handling.
- GstObject now has a class function save/restore_thyself.
- GstObject has a generic method gst_object_save_thyself, this makes it
possible to fire a signal wehever a new object is loaded. This is needed
so we can add XML save hooks.
- GstXML API has changed slightly. You now have to create a GstXML object
first before you can actually load something. This makes it possible to
attach a signal to GstXML whenever an object is loaded. I'm not sure we
will keep this interface.
- GstObject can now print the path_string without knowing about the GstPad and
GstElement types.
- Added gst_bin_get_by_name_recurse_up to lookup an element in the current
element hierarchy.
- added XML namespaces to the saved pipelines the namespace is:
http://gstreamer.net/gst-core/1.0/
namespaces are needed to distinguish user generated XML from the core XML.
Note that the plugins still contain a macro GST_OBJECT_PARENT that will be
replaced with gst_pad_get_parent shortly.
Original commit message from CVS:
Docs updates
Added XML load from memory functionality
Undid the videosink patch, something else is wrong now on my machine:
no MMX acceleration :-(
Original commit message from CVS:
More EOS changes.
When a bin2 is found inside a bin1, we add the bin2 to the EOS providers
of the bin1. When there is nothing more to schedule in bin1 and bin2 has
fired EOS, bin1 is in EOS.
The queue overrides the EOS notification and calls EOS on the src pad
when the queue is empty and the sink pad is in EOS.
Original commit message from CVS:
Added an extra signal_cond to queue to make sure that the waiting thread
is woken up. Can somebody with queue problems verifify that this does
improve the situation a bit. I'm suspecting that something else is going
on, like a pthreads bug or something.
Small updates to the fake elements.
Original commit message from CVS:
Mega update of INFO, DEBUG, and ERROR subsystems, renamed with GST_ prefix.
GST_DEBUG now takes a category parameter, which is the same as GST_INFO
system. They are now called GST_CAT_*. All the GST_DEBUGs are set to 0
for now, we need to go and fix all these eventually.
Original commit message from CVS:
Docs updates: remove sink, src, filter, connection
added gstinfo to docs.
Updated some core files for the docs
gsttypefind did not include gst_private
Added CFlags to Makefile.am in gst/elements
Original commit message from CVS:
Reparented everything to GstElement, removing GstSrc, GstSink, GstFilter,
and GstConnection. Also fixed a bug in gst_bin_iterate_func.
Original commit message from CVS:
Pending editor changes.
fixes for autoplug of elementary MPEG1 video streams
make sure mp3 types get compiled
videosink changes for xml loading
Original commit message from CVS:
More massive changes to the scheduling system. Moved the scheduling code
to gstscheduler.[ch], so an child bin can replace the scheduler.
Introduced the concept of chains, which are subsets of the list of managed
elements for a given manager bin, which get scheduled as separate entities.
gst_bin_iterate_func should be pretty much fixed now, the scheduling code
gets to do all the hard work.
Cothreaded case work in the couple tests I've tried, chained is next.
Original commit message from CVS:
Fixing two bugs:
1) I had commented out an unlock. duh.
2) changed the _get function to return the buffer rather than call _push
Also uncommented some debugging I'd turned off. Need to solve the verbosity
problem somehow, I think by way of debug levels as well as info levels...
Original commit message from CVS:
Massive scheduling changes (again). Not entirely complete, but getting
closer. Need to think about various scheduling plans that we might want
to produce, and figure out the rules for what is legal, and how to get
the results we need as far as the plan.
Original commit message from CVS:
WARNING: Don't grab this updated unless you're really, REALLY sure.
WARNING: Wait for the next one.
Whole lotta changes here, including a few random bits:
examples/*/Makefile: updated to use `libtool gcc`, not just `gcc`
gst/
gstbuffer.h: updated to new flag style
gst.c, gstdebug.h: added new debugging for function ptrs
gstpipeline.c: set type of parent_class to the class, not the object
gstthread.c: ditto
plugins/
cdparanoia/cdparanoia.c: added an argument type, updated some defaults
cobin/spindentity.c: updated to new do/while loopfunction style
mp3encode/lame/gstlame.c: argument types, whole lotta lame options
tests/: various changes
Now, for the big changes: Once again, the scheduling system has changed.
And once again, it broke a whole bunch of things. The gist of the change
is that there is now a function pointer for gst_pad_push and gst_pad_pull,
instead of a hard-wired function. Well, currently they are functions, but
that's for debugging purposes only, they just call the function pointer
after spewing lots of DEBUG().
This changed the GstPad structure a bit, and the GstPad API as well.
Where elements used to provide chain() and pull() functions, they provide
chain() and get() functions. gst_pad_set_pull[region]_function has been
changed to get_pad_set_get[region]_function. This means all the elements
out there that used to have pull functions need to be updated. The calls
to that function have been changed in the normal elements, but the names
of the functions passed is still _pull[region](), which is an aesthetic
issue more than anything.
As for what doesn't work yet, just about anything dealing with Connections
is hosed, meaning threaded stuff won't work. This will be fixed about 12
hours from now, after I've slept, etc. The simplefake.c test works in
both cothreaded and chained cases, but not much else will work due to the
Connection problem. Needless to say, don't grab this unless you *need*
these features *now*, else wait to update this stuff until tomorrow.
I'm going to sleep now.
Original commit message from CVS:
Implemented the hybrid scheduling system for sources and connections
outside the current Bin. Is a bit hackish in one place, but I'll work out
a way to make that cleaner soon. queue.c in tests now works nicely in all
cases. More to come later.
