Commit graph

11176 commits

Author SHA1 Message Date
Thiago Santos
f1fa6c6531 camerabin2: Use a single location for both modes
Implement the location property just like it works in camerabin, the
same location is used for both images and videos
2011-06-23 00:05:13 -03:00
Thiago Santos
f31554bc4f camerabin2: Send serialized custom events for filename changes in image sink
Using serialized custom events for switching image capture saving
location makes camerabin2 save each capture correctly to the location
that was set during the moment start-capture was called, and not
the moment the filesink was writing to disk.

This prevents captures to be overwriten by racyness among start-capture
and setting location for images.
2011-06-23 00:05:13 -03:00
Thiago Santos
a33eae1a65 camerabin2: No need to change state of the whole image branch
We only need to change the state of the filesink to switch its
saving location. This might still cause some problems of dropping
captured buffers, but it is better than changing the state of
the whole branch.
2011-06-23 00:05:13 -03:00
Thiago Santos
b1b0082cdb camerabin2: Use names for image and video encodebin
Naming encodebins as image-encodebin and video-encodebin to make
it easier for debugging camerabin2.
2011-06-23 00:05:13 -03:00
Thiago Santos
e23e5380d3 camerabin2: Remove unused variable 2011-06-23 00:05:13 -03:00
Thiago Santos
18f6859037 tests: camerabin2: Adds new test to check image location correctness
This new test checks that images are saved with the filename setting
on location on the moment of the start-capture
2011-06-23 00:05:13 -03:00
Thiago Santos
ac2d5821b3 camerabin2: Minor debug message fix 2011-06-23 00:05:13 -03:00
Thiago Santos
62c65a49f3 examples: camerabin2: Adds performance measurement to gst-camerabin2-test
Adds performance (timing) measure feature to gst-camerabin2-test, it allows
users to specify some target values for commonly measured times and the
application will print out a table of values at the end of its execution
with the measured times and averages of them.
2011-06-23 00:05:12 -03:00
Mark Nauwelaerts
eca1614f08 legacyh264parse: create correct avc codec-data
Fixes #653013.
2011-06-22 10:13:55 +02:00
Mark Nauwelaerts
d631e1b348 legacyh264parse: fix output caps alignment for avc input
... particularly when splitting packetized input.

Fixes #652995.
2011-06-21 12:46:41 +02:00
Mark Nauwelaerts
10bec5c08f h264parse: avc input must either pass-through or be split into bytestream chunks
... since parsing code is not meant to receive avc data.

Fixes #653087.
2011-06-21 12:46:37 +02:00
Mark Nauwelaerts
160207abb9 h264parse: avoid bogus frame parsing state 2011-06-21 12:46:35 +02:00
David Schleef
571e95cf10 decklink: update DeckLink API wrappers 2011-06-20 12:49:16 -07:00
David Schleef
16a49a3617 decklink: Add connection type 2011-06-20 12:49:16 -07:00
Rafael Diniz
bb4844b29e decklinksink: Add audio support
Signed-off-by: David Schleef <ds@schleef.org>
2011-06-20 12:49:16 -07:00
David Schleef
1faf410ca3 decklink: Add various features
Better mode support, input source property, audio support.
2011-06-20 12:49:16 -07:00
David Schleef
69c930565f decklink: remove unused code 2011-06-20 12:49:16 -07:00
David Schleef
1e1c16150b decklink: reindent 2011-06-20 12:49:16 -07:00
Thiago Santos
ca8ea19cc3 tsdemux: only free the index array if it exists
Only free the array if it exists.

Contains an unrelated indentation fix, courtesy of gst-indent
2011-06-17 16:18:03 -03:00
Jan Schmidt
d04efbd735 update docs generated files 2011-06-18 01:11:05 +10:00
Jan Schmidt
38bf3169ff RTMP: add rtmpsink element for output to an RTMP server 2011-06-18 01:09:51 +10:00
Mark Nauwelaerts
af1fca6d7d tests: add colorspace unit test
Compares colorspace result with ffmpegcolorspace output using SSIM.
Also probes for possible crashes for odd width and height image by applying
all possible colorspace transformations.
2011-06-17 12:26:15 +02:00
Mark Nauwelaerts
6429ead4bc debugutils: add compare element 2011-06-17 12:10:06 +02:00
Mark Nauwelaerts
a1f5b2e0cc colorspace: fix odd width and height handling in some fastpath cases 2011-06-17 12:07:34 +02:00
Olivier Crête
26f7a1ca66 shm: Improve documentation of internal shmpipe 2011-06-16 19:06:03 -04:00
Tim-Philipp Müller
a6c4f3ed4e wininetsrc: don't use G_CONST_RETURN
It's going to be deprecated really soon.
2011-06-13 11:12:36 +01:00
Edward Hervey
c27b16bfe3 videoparsers: Speed up the start code search algorithm
Based on 96a7f9c8b1

Makes it 3-4 times faster
2011-06-12 12:55:40 +02:00
Edward Hervey
7032cd12e7 videoparsers: Fix sink pad template
no wonder it was never picked up ...
2011-06-12 12:40:15 +02:00
Edward Hervey
b3ef72f2eb tsdemux: Don't free unexistent PAT
And cleanup find_timestamps a bit
2011-06-12 11:27:30 +02:00
Edward Hervey
e1a7d71184 tsdemux: More fixes to handle non-188 byte packets 2011-06-07 20:50:35 +02:00
Edward Hervey
6c0254b84b mpegts: Stop scanning for keyframes as early as possible 2011-06-07 20:50:35 +02:00
Janne Grunau
ae2e7624d6 mpegtsdemux: always try to seek for to a keyframe
keyframe is expected to lie in the the next ~2500 ms
2011-06-07 20:50:35 +02:00
Janne Grunau
9352cfc478 mpegtsdemux: fix timestamps in newsegement event after seeking 2011-06-07 20:50:34 +02:00
Janne Grunau
cde65d6d6e mpegtsdemux: payload parsing for H.264 2011-06-07 20:50:34 +02:00
Janne Grunau
ff15d6fa80 mpegtsdemux: implement key_unit seeking for MPEG2 video 2011-06-07 20:50:34 +02:00
Janne Grunau
3ce1ec7c9c mpegtsdemux: accurate seeking
* pes header parsing for pts is ugly, refactor
 * timestamps/newsegment after seeking is still off
2011-06-07 20:50:34 +02:00
Janne Grunau
15391b29e1 mpegtsdemux: push based seeking based on PCR
buffer timestamps are converted to GstClockTime to cover pcr/pts wraps.
multiple pcr/pts wraps are handled with an index which ensures at most
a single pcr wraparound between two entries.
the last seen pcr is recorded to have a nearby index point for short seeks
resuming playback might be delayed if the postion is not a keyframe

TODO: replace manual packet scanning and parsing in the initial duration estimation
2011-06-07 20:50:34 +02:00
Janne Grunau
f89a0abca0 mpegtsdemux: create function for pcr parsing 2011-06-07 20:50:34 +02:00
Janne Grunau
37f1decf78 mpegtsdemux: adaptation field length == 0 is valid
it can be used to insert a single stuffing byte
do not parse the following payload as adaptation field
2011-06-07 20:50:34 +02:00
Tim-Philipp Müller
eb2470fb9e Add gst/invtelecine to CRUFT_DIRS 2011-06-07 14:14:36 +01:00
Tim-Philipp Müller
98ade69fcf configure: require GLib >= 2.24
Make implicit requirement explicit.
2011-06-07 13:44:26 +01:00
Stefan Kost
b6844bc730 tests: add a test for baseaudiovisualizer 2011-06-06 15:25:14 +03:00
Stefan Kost
f7fe0c9e6f baseaudiovisualizer: fix last block condition
Also push out the last frame if we have exact amount of samples. Fix the adapter
flushing to not cause endless loops. Drop a redundant avail() check.
2011-06-06 15:25:14 +03:00
Stefan Kost
594134d139 audiovisualizers: add a README with comments and plans 2011-06-06 15:25:14 +03:00
Stefan Kost
30e2575e43 docs: update inspect files 2011-06-06 15:25:14 +03:00
Stefan Kost
bff846b76a docs: add new audiovisualizers to the plugin docs 2011-06-06 15:25:14 +03:00
Stefan Kost
f66a88bc70 audiovisualizers: remove some not needed boilerplate 2011-06-06 15:25:14 +03:00
Stefan Kost
0a41b9084e audiovisualizers: add a spacescope element
Add another element that maps left/right channel to x,y coordinates.
2011-06-06 15:25:14 +03:00
Stefan Kost
9936332f0a synaescope: tweak the algorithm
Speed-up the calculation a bit. Keep a few values as doubles. Tune the scaling
to get nices colors.
2011-06-06 15:25:14 +03:00
Stefan Kost
0fd078f156 audiovisualizers: doc-blob and comment updates 2011-06-06 15:25:14 +03:00