Sebastian Dröge
729e3c8a10
videoencoder: Add sink_query() src_query() virtual functions
...
Based on the videodecoder change by Nicolas Dufresne and applied
here for consistency.
https://bugzilla.gnome.org/show_bug.cgi?id=720103
2013-12-09 16:34:19 +01:00
Julien Isorce
79ef75888c
videodec/enc: clear reconfigure flag if negotiate succeeds
...
So that it avoids to send an allocation query twice.
One from an early call to gst_video_encoder_negotiate from a
subclass, then one from gst_video_encoder_allocate_output_frame.
Which means that previously gst_video_encoder_negotiate was not
clearing the GST_PAD_FLAG_NEED_RECONFIGURE even on success.
Fixes bug https://bugzilla.gnome.org/show_bug.cgi?id=719684
2013-12-05 15:19:16 +00:00
Sebastian Dröge
820d7d7798
videoencoder: Return not-negotiated if we don't have caps when the first buffer arrives
...
Otherwise things like filesrc ! jpegenc ! fakesink just crash with
a segmentation fault because subclasses expect caps to be there.
2013-12-05 11:26:55 +01:00
Sebastian Dröge
35ee4b056b
videodecoder/videoencoder: Mark pads as requiring reconfiguration again if negotiation fails
...
Otherwise we might end up in non-optimal configuration, especially
when a flush happened during reconfiguration.
2013-09-12 09:35:00 +02:00
Matej Knopp
d03feedf4c
videoencoder: Check for invalid stop position before calculating a duration from it
...
https://bugzilla.gnome.org/show_bug.cgi?id=707332
2013-09-03 09:50:56 +02:00
Andoni Morales Alastruey
688505de88
videoencoder: fix forwarding of GstForceKeyUnit events
...
Use the frame id to match the output forced keyframe with
the event that forced it.
https://bugzilla.gnome.org/show_bug.cgi?id=706885
2013-08-27 15:11:33 +02:00
Sebastian Dröge
b0e4b5f69a
videoencoder: Make sure to return TRUE if the same caps are set again
2013-08-25 10:26:30 +02:00
Sebastian Dröge
f678411c6e
videoencoder: Only set the caps when they actually changed
2013-08-23 19:20:03 +02:00
Sebastian Dröge
146bb1a153
video{en,de}coder: Add new flush vfunc as a replacement for reset
2013-08-15 13:26:39 +02:00
Sebastian Dröge
9df036c216
video{en,de}coder: Revert to old ::reset() behaviour and deprecate it
2013-08-15 13:26:38 +02:00
Sebastian Dröge
047abdc944
videodecoder/encoder: Call reset() always between start() and stop() and never outside
2013-07-26 10:22:32 +02:00
Sebastian Dröge
9259ee6729
videoencoder/decoder: Call reset() before start() too
2013-07-25 14:25:31 +02:00
Sebastian Dröge
c24995c31c
videoencoder: There's no point in resetting the encoder when the caps change
...
The subclass will be called with set_format() and there it can drain
if necessary and reset whatever is necessary. This is the same behaviour
as for the video decoder.
2013-07-25 10:53:14 +02:00
Sebastian Dröge
291b05b40a
videoencoder: Reset internal state and segments on FLUSH_STOP
...
https://bugzilla.gnome.org/show_bug.cgi?id=656007
2013-07-25 10:46:04 +02:00
Sebastian Dröge
7074fff7b4
videoencoder: Refactor GstVideoEncoder::reset() handling a bit
...
Let gst_video_encoder_reset() call it as would be intuitive and
only call it indirectly from gst_video_encoder_drain(). Now it
actually makes sense.
2013-07-25 10:43:08 +02:00
Mathieu Duponchelle
798ee17675
videoencoder: Send all pending events with type < CAPS before sending caps.
...
https://bugzilla.gnome.org/show_bug.cgi?id=703196
2013-07-01 11:15:21 +02:00
Sebastian Dröge
85eac2c31c
video(enc|dec)oder: Don't return not-negotiated if flushing
...
If the pad is flushing after a failed negotiation, return
GST_FLOW_FLUSHING instead from finish_frame().
https://bugzilla.gnome.org/show_bug.cgi?id=701763
2013-06-30 18:17:47 +02:00
Sebastian Dröge
c5e9df4b51
videoencoder: Don't require an output state to be set before allocating output buffers
2013-05-25 16:08:06 +02:00
Sebastian Dröge
0c2c909497
video: Always provide a buffer in gst_video_(enc|dec)oder_allocate_output_buffer()
...
We have no way of tell the caller of the exact error (e.g. if we're flushing),
so will have to wait until the caller uses API that returns a GstFlowReturn,
for example when pushing this buffer.
https://bugzilla.gnome.org/show_bug.cgi?id=700006
2013-05-24 16:54:46 +02:00
Sebastian Dröge
2cc6a62b31
videoencoder: Make sure to push any pre-caps events before the caps are set
2013-05-09 16:05:59 +02:00
Sebastian Dröge
3e4aec6e7b
video: Make sure to push pre-caps events before the caps event
...
https://bugzilla.gnome.org/show_bug.cgi?id=699894
2013-05-08 15:50:34 +02:00
Sebastian Dröge
f7db63f1b8
videoencoder: Try harder to push writable buffers downstream
...
For this release the corresponding GstVideoCodecFrame before
pushing the buffer. The buffer will now be writable unless
the subclass still holds another reference to the buffer or
the frame.
2013-04-25 16:23:14 +02:00
Sebastian Dröge
9d309a3e06
videoencoder: Simply setcaps function
2013-04-18 09:58:37 +02:00
Sebastian Dröge
0b83d13231
videoencoder: Ignore caps events if the caps did not change
2013-04-15 09:44:37 +02:00
Nicolas Dufresne
7107e97273
videoencoder: Remove done ToDo
...
https://bugzilla.gnome.org/show_bug.cgi?id=675761
2012-12-31 19:09:01 +00:00
Nicolas Dufresne
8a233a215d
videoencoder: Documentation fix
...
https://bugzilla.gnome.org/show_bug.cgi?id=675761
2012-12-31 19:03:29 +00:00
Sebastian Dröge
3f82e919dd
libs: Use foo/foo.h as single-include header consistently everywhere
...
https://bugzilla.gnome.org/show_bug.cgi?id=688785
2012-12-12 17:13:10 +00:00
Tim-Philipp Müller
5f59b4f7ee
Fix FSF address
...
https://bugzilla.gnome.org/show_bug.cgi?id=687520
2012-11-03 23:05:09 +00:00
Mark Nauwelaerts
4adfff03ef
video{de,en}coder: fix missing timestamp estimating
...
... by having some more timestamp tracking in a private frame field.
Not doing so would lead to (a.o.) losing the needed minimum timestamp in
an earlier sent frame.
2012-09-28 13:59:24 +02:00
Mark Nauwelaerts
dbc89e3ab6
videoencoder: use oldest frame PTS to estimate missing outgoing DTS
2012-09-26 16:32:37 +02:00
Mark Nauwelaerts
d247301aec
videoencoder: incoming buffer DTS is irrelevant
...
... and bogus anyway if PTS != DTS
2012-09-26 16:32:37 +02:00
Mark Nauwelaerts
6973a66813
videoencoder: clip input buffers to current input segment
...
... rather than to output segment, which will only be set
to current input segment if some output is produced
(coming from non-clipped input).
Also fixup debug message.
2012-09-25 17:19:15 +02:00
Tim-Philipp Müller
5101adf740
Remove some #define GLIB_DISABLE_DEPRECATION_WARNINGS that are no longer needed
2012-09-10 01:27:18 +01:00
Mark Nauwelaerts
d4c1b160ef
videoencoder: only set invalid DTS equal to PTS for keyframe
...
Also add a bit more debug.
See also https://bugzilla.gnome.org/show_bug.cgi?id=679443
2012-09-07 17:41:52 +02:00
Mark Nauwelaerts
20806e4c16
videoencoder: plug some leaks
2012-09-06 13:04:56 +02:00
Wim Taymans
a994ebcf1b
videoencoder: allow 0 sized output frames
...
Allow 0 sized frames in gst_video_encoder_allocate_output_frame(). Theora
encodes repeat frames, for example, as 0 sized buffers.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=681196
2012-08-24 16:56:00 +02:00
Sebastian Dröge
bdc056c12d
video: Add methods to return a list of all pending GstVideoCodecFrames
2012-08-16 12:13:25 +02:00
Víctor Manuel Jáquez Leal
c02dcda885
videoencoder: getter for allocator
...
Sometimes the encoder would need to use the allocator for something else than
just allocating output buffers, for example, querying different parameters.
This patch expose a getter accessor for the negotiated memory allocator.
2012-08-14 15:47:23 +02:00
Sebastian Dröge
b141bfed60
video: Merge upstream stream tags
2012-08-09 16:24:24 +02:00
Sebastian Dröge
3c915afc39
videoencoder: Add API to conveniently handle tags
2012-08-09 16:02:15 +02:00
Sebastian Dröge
e37bb460bd
videoencoder: Add negotiate vfunc that is used to negotiate with downstream
...
The default implementation negotiates a buffer pool and allocator
with downstream.
2012-08-09 14:47:46 +02:00
Sebastian Dröge
7bdcb12b41
gst: Set alignment at the correct place of GstAllocationParams
2012-08-08 17:41:19 +02:00
Andoni Morales Alastruey
d8326a8eda
videoencoder: add proper format for gsize
2012-08-08 17:41:19 +02:00
Sebastian Dröge
98983e08ae
videoencoder: Always propose a video buffer pool when the subclass didn't provide one
...
And also request 16-byte aligned buffers if the subclass didn't
set anything else.
2012-08-08 17:41:19 +02:00
Edward Hervey
6423a4027e
video: Make all frame_number guint32
...
Unifies the code and ensures that:
* subclasses needing to use the frame_number on a void* field will
always work
* wraparounds will be automatically taken care of if we have to deal
with more than 2**32 frames
2012-07-26 18:38:42 +02:00
Mark Nauwelaerts
7b135e8810
video{de,en}coder: delay input caps processing until processing data
...
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=680614
2012-07-26 14:35:45 +02:00
Mark Nauwelaerts
e1137b8c66
videoencoder: minor doc fix
2012-07-25 15:58:19 +02:00
Vivia Nikolaidou
d2e1b64e0c
videoencoder: Expose _negotiate function
...
This is to be called by encoders once they have set the output format
in order for (re)negotiation to be triggered as early as possible.
https://bugzilla.gnome.org/show_bug.cgi?id=679878
2012-07-24 20:42:49 +02:00
Sebastian Dröge
fcf5e389ce
videoencoder: Hold the stream lock when reconfiguring the element
2012-07-23 12:06:16 +02:00
Sebastian Dröge
df08e333d2
video: Correct usage of the base class stream lock
...
And also renegotiate if the srcpad requires reconfiguration
2012-07-23 11:50:11 +02:00
Sebastian Dröge
1645ea4a90
video: Rename alloc_output_buffer() to allocate_output_buffer()
2012-07-23 10:18:41 +02:00
Sebastian Dröge
97ba363092
videoencoder: Minor cleanup
2012-07-23 10:04:48 +02:00
Sebastian Dröge
cce1078fe9
videoencoder: Add decide_allocation vfunc and functions to allocate buffers with the information from the allocation query
2012-07-23 09:39:47 +02:00
Edward Hervey
2817bdadc9
libs: Remove "Since" markers and minor doc fixups
2012-07-13 12:11:06 +02:00
Sebastian Dröge
9002471c93
video: Document buffer ownership of the GstVideoCodecFrame more explicit
...
And also the implications of calling the finish() functions.
2012-07-05 14:29:42 +02:00
Wim Taymans
136a3fd37f
videoencoder: make PTS and DTS handling more explicit
2012-06-27 16:56:22 +02:00
Sebastian Dröge
cb6b835d11
videoencoder: Ensure buffers don't disappear early
...
The frames are the owners of the buffers
2012-06-19 09:34:49 +01:00
Sebastian Dröge
4119246081
videoencoder,videodecoder: Return new references from _get_frame()
2012-06-19 09:26:36 +01:00
Sebastian Dröge
86b36c3463
videoencoder: Don't unref frame twice if not in the list
2012-06-04 10:46:13 +02:00
Raimo Järvi
d42a197c04
video: Fix printf format warnings on mingw-w64
...
https://bugzilla.gnome.org/show_bug.cgi?id=676442
2012-05-24 10:57:21 +02:00
Tim-Philipp Müller
c1bc70300d
docs: fix up video decoder/encoder docs a bit
...
Makes gtk-doc happy.
2012-05-16 12:40:07 +01:00
Edward Hervey
4d7cd2e638
videoencoder: _get_oldest_frame: return a reference
2012-05-01 16:59:06 +02:00
Edward Hervey
67a4c0c7b2
videoencoder: Add a reference to frame passed to subclass
...
We have one reference owned by the internal frame list and one reference
passed to the subclass.
2012-05-01 16:59:00 +02:00
Sebastian Dröge
f9facc6a4a
video: Remove interlaced handling from the video base classes
...
This must be handled by the subclasses in 0.11 because interlacing
is much more complex now and can't be handled in a generic way.
2012-04-25 18:21:03 +02:00
Sebastian Dröge
bcef106f73
video: Fix latency query handling if the element's own max_latency is GST_CLOCK_TIME_NONE
2012-04-25 13:53:29 +02:00
Sebastian Dröge
47e169b0b5
videoencoder: Proxy the interlaced buffer flags to the GstVideoCodecFrame
2012-04-25 13:44:30 +02:00
Sebastian Dröge
76f47979c1
videoencoder: Don't propose video-meta by default
2012-04-25 13:19:11 +02:00
Sebastian Dröge
3de8d58c4e
videoencoder: Add support for subclasses to propose allocation parameters
2012-04-24 22:42:59 +02:00
Sebastian Dröge
a8c40a658c
video: Some porting bugfixes
2012-04-24 21:32:08 +02:00
Sebastian Dröge
13b88908ce
videoencoder: Require to chain up to the parent's sink event functions
2012-04-24 19:47:22 +02:00
Sebastian Dröge
f7bc9cc5ba
video: Initial port of video base classes and related things to 0.11
2012-04-24 19:35:24 +02:00
Edward Hervey
f6cfd763e4
video: Base classes for video decoders and encoders
2012-04-24 17:03:40 +02:00