Original commit message from CVS:
* gst/matroska/ebml-read.c: (gst_ebml_read_seek):
* gst/matroska/matroska-demux.c:
(gst_matroska_demux_handle_seek_event),
(gst_matroska_demux_parse_contents_seekentry),
(gst_matroska_demux_loop):
Fix the Forte build by making function declaration signatures
match the implementations.
Original commit message from CVS:
* gst/matroska/ebml-ids.h:
Add ID for EBML CRC32 elements.
* gst/matroska/Makefile.am:
* gst/matroska/ebml-read.c: (gst_ebml_finalize),
(gst_ebml_read_class_init), (gst_ebml_read_peek_bytes),
(gst_ebml_read_get_length), (_ext2dbl), (gst_ebml_read_float),
(gst_ebml_read_header):
Support reading 80bit floats, add finalize method to clean up
in any case, support reading length/id elements with any length
as long as it's smaller than our supported maximum, don't leak
buffers if reading as much data as we wanted failed and some
smaller cleanup.
Original commit message from CVS:
* gst/matroska/ebml-read.c:
Use GINT64 formatting constants from GLIB.
* gst/matroska/matroska-demux.c:
Add some guards to avoid a possible division by 0 and crashing
with NULL events on some systems.
Use gst_gdouble_to_guint64 somewhere instead of an implicit
conversion.
* gst/matroska/matroska-mux.c:
Check for invalid timestamps in a bunch of places to avoid
writing bogus durations into the output file.
Fix some double<->gint64 conversions that weren't using
gst_guint64_to_gdouble
Original commit message from CVS:
* gst/matroska/ebml-read.c: (gst_ebml_read_sint):
Even better would be if we actually did the right thing
here (also, G_GUINT64_CONSTANT only exists since GLib-2.10).
Original commit message from CVS:
* gst/matroska/ebml-read.c: (gst_ebml_read_sint):
Can't just replace 1LL with 1L here just because MSVC doesn't
support it, as it might lead to incorrect results when doing the
bitshifting here. Using GLib's G_GUINT64_CONSTANT() macro to
force a 64-bit constant in a way that all compilers are happy with.
Original commit message from CVS:
* ext\jpeg\smokecodec.c:
use of GST_DEBUG instead of DEBUG(a...) for WIN32
* ext\speex\gstspeexenc.c: (gst_speexenc_set_header_on_caps):
move first instruction after all variables declarations
* gst\alpha\gstalpha.c:
* gst\effectv\gstshagadelic.c:
* gst\smpte\paint.c:
* gst\videofilter\gstvideobalance.c:
define M_PI if it's not defined (it's not defined on WIN32)
* gst\cutter\gstcutter.c: (gst_cutter_chain):
* gst\id3demux\id3v2frames.c: (parse_relative_volume_adjustment_two):
* gst\level\gstlevel.c: (gst_level_set_property), (gst_level_transform_ip):
* gst\matroska\matroska-demux.c: (gst_matroska_demux_parse_info),
(gst_matroska_demux_video_caps):
* gst\matroska\matroska-mux.c: (gst_matroska_mux_start), (gst_matroska_mux_finish):
* gst\wavparse\gstwavparse.c: (gst_wavparse_stream_data):
use gst_guint64_to_gdouble for conversions
* gst\goom\filters.c: (setPixelRGB_):
fix a debug which was using undefined variable
* gst\level\gstlevel.c: (gst_level_set_caps), (gst_level_transform_ip):
* gst\matroska\ebml-read.c: (gst_ebml_read_sint):
replace LL suffix with L suffix (LL isn't supported by MSVC6.0)
* win32/vs6:
add vs6 projects files for most of plugins-good
Original commit message from CVS:
* gst/matroska/ebml-read.c: (gst_ebml_read_buffer):
Allow for 0-sized buffers. Fixes length query problems in
starwars.mkv from the testsuite.
Original commit message from CVS:
* gst/matroska/ebml-read.c: (gst_ebml_read_class_init),
(gst_ebml_read_init), (gst_ebml_read_use_event),
(gst_ebml_read_element_id), (gst_ebml_peek_id),
(gst_ebml_read_seek), (gst_ebml_read_skip),
(gst_ebml_read_reserve), (gst_ebml_read_buffer),
(gst_ebml_read_master):
* gst/matroska/ebml-read.h:
* gst/matroska/matroska-demux.c:
(gst_matroska_demux_parse_contents),
(gst_matroska_demux_loop_stream), (gst_matroska_demux_audio_caps):
Disgustingly evil hack for working around INTERRUPT events and
their extremely annoying habit of being a pain in the ass. We
simply peek a cluster before reading any of it.
Original commit message from CVS:
* gst/wavparse/gstwavparse.c:
add ATRAC3 to STATIC CAPS to fix a warning
* gst/matroska/ebml-read.c:
* gst-libs/gst/riff/riff-read.c:
fix typos
Original commit message from CVS:
* ext/dvdread/dvdreadsrc.c: (dvdreadsrc_class_init),
(dvdreadsrc_init), (dvdreadsrc_dispose), (dvdreadsrc_set_property),
(dvdreadsrc_get_property), (_open), (_seek), (_read),
(dvdreadsrc_get), (dvdreadsrc_open_file),
(dvdreadsrc_change_state):
Fix. Don't do one big huge loop around the whole DVD, that will
cache all data and thus eat sizeof(dvd) (several GB) before we
see something.
* gst-libs/gst/riff/riff-read.c: (gst_riff_read_seek):
Actually NULL'ify event after using it.
* gst/matroska/ebml-read.c: (gst_ebml_read_use_event),
(gst_ebml_read_handle_event), (gst_ebml_read_element_id),
(gst_ebml_read_element_length), (gst_ebml_read_element_data),
(gst_ebml_read_seek), (gst_ebml_read_skip):
Handle events.
* gst/mpegstream/gstdvddemux.c: (gst_dvd_demux_base_init),
(gst_dvd_demux_init), (gst_dvd_demux_get_audio_stream),
(gst_dvd_demux_get_subpicture_stream), (gst_dvd_demux_plugin_init):
Fix timing (this will probably break if I seek using menus, but
I didn't get there yet). VOBs and normal DVDs should now work.
Add a mpeg2-only pad with high rank so this get autoplugged for
MPEG-2 movies.
* gst/mpegstream/gstmpegdemux.c: (gst_mpeg_demux_base_init),
(gst_mpeg_demux_class_init), (gst_mpeg_demux_init),
(gst_mpeg_demux_new_output_pad), (gst_mpeg_demux_get_video_stream),
(gst_mpeg_demux_get_audio_stream),
(gst_mpeg_demux_get_private_stream), (gst_mpeg_demux_parse_packet),
(gst_mpeg_demux_parse_pes), (gst_mpeg_demux_plugin_init):
Use this as second rank for MPEG-1 and MPEG-2. Still use this for
MPEG-1 but use dvddemux for MPEG-2.
* gst/mpegstream/gstmpegparse.c: (gst_mpeg_parse_class_init),
(gst_mpeg_parse_init), (gst_mpeg_parse_new_pad),
(gst_mpeg_parse_parse_packhead):
Timing. Only add pad template if it exists. Add sink template from
class and not from ourselves. This means we will always use the
correct sink template even if it is not the one defined in this
file.
Original commit message from CVS:
* ext/dirac/Makefile.am:
* ext/dirac/gstdirac.cc:
* ext/dirac/gstdiracdec.cc:
* ext/dirac/gstdiracdec.h:
Do something. Don't actually know if this works because I don't
have a demuxer yet.
* ext/gsm/gstgsmdec.c: (gst_gsmdec_getcaps):
Add channels=1 to caps returned from _getcaps().
* ext/ogg/gstogmparse.c: (gst_ogm_audio_parse_get_type),
(gst_ogm_video_parse_get_type), (gst_ogm_audio_parse_base_init),
(gst_ogm_video_parse_base_init), (gst_ogm_parse_init),
(gst_ogm_audio_parse_init), (gst_ogm_video_parse_init),
(gst_ogm_parse_sink_convert), (gst_ogm_parse_chain),
(gst_ogm_parse_change_state):
Separate between audio/video so ogmaudioparse actually uses the
audio pad templates. Both audio and video work now, including
autoplugging. Also use sometimes-srcpad hack.
* gst-libs/gst/riff/riff-read.c: (gst_riff_read_seek):
Handle events better. Don't hang on infinite loops.
* gst/avi/gstavidemux.c: (gst_avi_demux_class_init),
(gst_avi_demux_init), (gst_avi_demux_reset),
(gst_avi_demux_src_convert), (gst_avi_demux_handle_src_query),
(gst_avi_demux_stream_header), (gst_avi_demux_stream_data),
(gst_avi_demux_change_state):
* gst/avi/gstavidemux.h:
Improve A/V sync. Still not perfect.
* gst/matroska/ebml-read.c: (gst_ebml_read_seek),
(gst_ebml_read_skip):
Handle events better.
* gst/qtdemux/qtdemux.c: (gst_qtdemux_handle_sink_event),
(gst_qtdemux_loop_header), (qtdemux_parse_trak),
(qtdemux_audio_caps):
Add IMA4. Improve event handling. Save offset after a seek when
the headers are at the end of the file so that we don't end up in
an infinite loop.
* gst/typefind/gsttypefindfunctions.c: (qt_type_find):
Add low-priority typefind support for files with no length.
Original commit message from CVS:
Write track and segment UIDs, write muxing date, write TRACKDEFAULTDURATION for TTA audio, write BLOCKDURATION if known.
Original commit message from CVS:
2004-01-30 Ronald Bultje <rbultje@ronald.bitfreak.net>
* gst-libs/gst/riff/riff-read.c: (gst_riff_peek_head),
(gst_riff_read_seek):
* gst/matroska/ebml-read.c: (gst_ebml_read_element_id),
(gst_ebml_read_seek):
Fix event handling.
Original commit message from CVS:
2004-01-02 Ronald Bultje <rbultje@ronald.bitfreak.net>
* gst/matroska/ebml-read.c: (gst_ebml_read_sint):
* gst/matroska/ebml-write.c: (gst_ebml_write_sint):
fix signed integer reading/writing.
Original commit message from CVS:
Riff, EBML, fourcc etc. work. Not fully finished, but better than
what we used to have and definately worth a first broad testing.
I've revived rifflib. Rifflib used to be a bytestream-for-riff, which
just dup'ed bytestream. I've rewritten rifflib to be a modern riff-
chunk parser that uses bytestream fully, plus adds some extra functions
so that riff file parsing becomes extremely easy. It also contains some
small usability functions for strh/strf and metadata parsing. Note that
it doesn't use the new tagging yet, that's a TODO.
Avidemux has been rewritten to use this. I think we all agreed that
avidemux was pretty much a big mess, which is because it used all
sort of bytestream magic all around the place. It was just ugly.
This is a lot nicer, very complete and safe. I think this is far more
robust than what the old avidemux could ever have been. Of course, it
might contain bugs, please let me know.
EBML writing has also been implemented. This is useful for matroska.
I'm intending to modify avidemux (with a riffwriter) similarly. Maybe
I'll change wavparse/-enc too to use rifflib.
Lastly, several plugins have been modified to use rifflib's fourcc
parsing instead of their own. this puts fourcc parsing in one central
place, which should make it a lot simpler to add new fourccs. We might
want to move this to its own lib instead of rifflib.
Enjoy!
