Doing so resets the stride from the VideoMeta and it wasn't done before
the commit below. While on it, drop the plane size check as we can't
reliably predict the correct size when using DRM modifiers.
Fixes: 89b0a6fa23 ("va: refactor buffer import")
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7196>
The driver - AKA intel-vaapi-driver - has been unmaintained for four years
now and encoding appears to be broken in various cases. As it's unlikely
that the situation will improve, blocklist the driver for encoding.
Decoding appears to be stable enough to keep it enabled.
The driver can still be used by setting the `GST_VA_ALL_DRIVERS` env
variable.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7186>
GstFFMpegAudDec.context can be nullptr if decoder got closed
without opening new context. Note that we don't need to clear
AVCodecContext.extradata there since avcodec_free_context()
will do clear the data if needed.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7184>
avcodec_close() is deprecated and it's not supported anymore to re-open
a codec, so we only ever allocate the codec in set_format() now and
always free it after usage.
As part of this, also fix various memory leaks in related code paths.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7148>
* gst_ffmpegviddec_frame() is the only caller of gst_ffmpegviddec_video_frame()
and has the same signature. Just move the checks into a single function and
use that.
* Make it clear which frames are the input and output ones in
gst_ffmpegviddec_video_frame() to make issues like the one fixed in the previous
commit more obvious.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7148>
Direct access to AVInputFormat::read_probe() is not possible anymore
with ffmpeg 7.0, and the usefulness of this typefinder seems limited
anyway. An alternative implementation around av_probe_input_format3() or
similar would be possible but it would be going over all possible ffmpeg
probes at once.
Having a typefinder here means that basically every application will
load the gst-libav plugin when typefinding is necessary, which has
unnecessary performance impacts. If a typefinder from here was indeed
missing from typefindfunctions in gst-plugins-base then it would be
better to add it there directly.
Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/3378
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7148>
${libdir}/gstreamer-1.0/include is only valid after installation, but
extra_cflags are added unconditionally, so we can't use that for
include flags.
Instead, let's add the include flag via variables, which are different
for installed and uninstalled pc files.
This is particularly bad for consuming GStreamer via CMake which barfs
on non-existent include paths.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7143>
since the encoded output is changing based on version
it does not make sense to check the output bitstream with a fixed
bytearray since the version in the target might vary. So sticking
to checking the number of output buffers and encoded frame size
similar to the other tests
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7142>
If the first buffers have no timestamp then the sink position would be
initialized to 0. The source pad might output this buffer, which would then
initialize the source position to 0 too.
Afterwards two buffers with a valid but huge timestamp might arrive before any
of them are output on the source pad. The first one would set the sink position
to a huge value, the second one would notice that the difference between the
huge value and 0 is certainly larger than max-size-time and consider the queue
as full.
Instead, simply don't update the times from buffers without timestamps and
assume whatever was set before is still valid, i.e. the buffer has the same
timestamp as the previous one.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7075>
We were storing the probe id in a different structure (DecodebinOutputStream)
than the pad it is targetting (which is in MultiQueueSlot).
The problem is that when re-targetting outputs (to a different slot)... we would
end up having an invalid probe id, or not have a reference to an existing one.
Instead, store the probe id in the same structure as the pad it's targetting
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7074>
According to the SPEC:
The frame id numbers (represented in display_frame_id, current_frame_id,
and RefFrameId[ i ]) are not needed by the decoding process, but allow
decoders to spot when frames have been missed and take an appropriate action.
So we should just print out warning and should not return error in parser when
mismatching. The decoder itself is already robust to handle the reference missing.
Fixes#3622
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7052>
Specify "layout" field in src template to make sure it's
set and gets fixated properly if the downstream element
supports both interleaved and non-interleaved caps.
Fixes
gst_pad_set_caps: assertion 'caps != NULL && gst_caps_is_fixed (caps)' failed
critical with e.g.
gst-launch-1.0 rtpdtmfsrc ! rtpdtmfdepay ! audioconvert ! fakesink
Not that the layout really matters in our case since we always
output mono anyway, but non-interleaved requires adding AudioMeta,
so this is the easiest fix.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7048>
This was already being used in handle_frame() for errors that happen when queueing a frame for decoding,
let's do the same when a frame is flagged with an error in the output callback.
From quick testing, this makes seeking more reliable (previously, it would sometimes cause a decoding error
and shut the whole decoder down due to GST_FLOW_ERROR).
Also manually sets the max error count to actually stop processing if too many errors occur.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7044>
ReferenceMissingErr is not critical and the simplest solution is to just ignore it. The frame has
the FrameDropped flag set when it occurs, so we can just drop it as usual.
BadDataErr is also not immediately critical, but in its case let's set the ERROR flag,
so the output loop can use GST_VIDEO_DECODER_ERROR to count and error out if it happens too many times.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7044>
Upon fatal errors the loop function will first post an error message
then push out an EOS event.
An application may react immediately to the error message by setting the
state of the pipeline to NULL, meaning by the time we push out the EOS
event PAUSED_TO_READY may have reset the seek seqnum to -1.
While this is harmless, the assertion when setting an invalid seqnum
isn't tidy, fix this by simply not resetting to INVALID as it serves no
practical purpose and the next READY_TO_PAUSED will select a new seqnum
anyway.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7034>
Certain V4L2 drivers can report that a video receiver is seeing
some signal, but that it is unable to synchronize to it. IOW: the driver
can sometimes report V4L2_IN_ST_NO_SYNC and not report V4L2_IN_ST_NO_SIGNAL.
In particular, I've seen the tc358743 (HDMI-to-CSI2 converter) driver
sometimes report this when deployed to a fleet of embedded Raspberry Pis.
The relevant kernel code is in [1]. The video output is not practically
usable when V4L2_IN_ST_NO_SYNC is reported (only visually corrupted frames,
sometimes with random "snow", are received). I assume that this happens when
either the HDMI cable is poorly plugged in or damaged or when a CSI2 FFC
cable is used and is damaged.
The change in this commit is useful for detecting this working-but-not-really
condition in application code. Applications already listening for the "Signal lost"
message will gain the ability to handle this condition.
There seem to be more V4L2 error flags like this, see [2]. However, I do not
have practical experience with them and adding only V4L2_IN_ST_NO_SYNC seems
like a safer option.
[1]: https://github.com/raspberrypi/linux/blob/be8498ee21aa/drivers/media/i2c/tc358743.c#L1534
[2]: https://www.kernel.org/doc/html/v6.6/userspace-api/media/v4l/vidioc-enuminput.html
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7027>
Musl does not implement GNU basename and have fixed a bug where the
prototype was leaked into string.h [1], which resullts in compile errors
with GCC-14 and Clang-17+
| sys/uvcgadget/configfs.c:262:21: error: call to undeclared function 'basename'
ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
| 262 | const char *v = basename (globbuf.gl_pathv[i]);
| | ^
Use glib function instead makes it portable across musl and glibc on
linux
[1] https://git.musl-libc.org/cgit/musl/commit/?id=725e17ed6dff4d0cd22487bb64470881e86a92e7a
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7028>
This fixes a regression introduced by 6c4f52ea20
There are cases where the input stream will be push-based, time-segment and not
have a collection nor caps. This means the event-based checks are not sufficient
to decide when/where to plug in a identity or parsebin to process the input.
For those corner cases we setup a buffer probe to ensure we always end up with
at least a parsebin
Fixes#3609
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7018>
When dealing with push-based inputs, we are now delaying the creation of
parsebin/identity until we get all pre-buffer events.
We therefore can simplify the handling of new pads being linked and only have to
check if upstream can handle pull-based or not.
Avoids creating parsebin for parsed upstream data altogether
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6995>
When we are dealing with parsed inputs (i.e. using identity), we need to ensure
that we have a valid stream collection (and therefore DBCollection) before
anything flows dowsntream.
In those cases, we hold onto those events until we get such a collection.
Fixes#3356
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7002>
This commit separates collection and selections into a new separate structure:
DecodebinCollection.
This provides a much cleaner/saner way of dealing with collections being
updated, gapless playback, etc...
There is now a list of DecodebinCollection in flight, of which two are special:
* input_collection, the currently inputted/merged collection
* output_collection, the currently active collection on the output of multiqueue
Handling GST_EVENT_SELECT_STREAMS is split, by looking for the collection to
which it applies. And the requested streams are stored in it. IIF that
collection is output_collection we can do the switch, else it will be updated
when it becomes active.
Detecting which collection/selection is active is done by looking at the
GST_EVENT_STREAM_START on the output of the multiqueue.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7002>
* Move the handling of GST_EVENT_STREAM_START on a slot to a separate function
* There was a lot of usage of `gst_stream_get_stream_id()` for the slot
active_stream. Cache that instead of constantly querying it.
* Rename the variables in `handle_stream_switch()` to be clearer
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7002>
* Centralize associating an output to a slot in one function, including properly
resetting those fields
* Rename functions to be more explicit
* Move code to "reset" an output stream into a dedicated function (will be used
later)
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7002>
* Rename the function names to be clearer, with prefixes
* Pass the input (or stream) directly where appropriate
* Document usage, inputs, ownership
* Rename variables for clarity where applicable
* Avoid double lock/unlock if callee can handle it directly
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7002>
Simplify its usage by having it directly create the message if the collection
changed. This is what caller were always doing and avoids releasing selection
locks yet-another-time
Also use it in more places to avoid code repetition
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7002>
