Original commit message from CVS:
* gst/gstregistrybinary.c: (gst_registry_binary_save_feature),
(gst_registry_binary_load_feature):
* gst/gstregistrybinary.h:
Refactor so that we can implement multiple features. Add support for
TypeFindFactory features.
Original commit message from CVS:
Patch by: Peter Kjellerstedt <Peter.Kjellerstedt@axis.com>
* configure.ac:
Fix AM_CONDITIONAL(GST_DISABLE_GST_DEBUG,...) and update comment.
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c: (gst_base_transform_activate):
Make sure streaming has finished before calling the ::stop() vfunc,
since that vfunc might clear state which is being used in the
streaming thread. This fixes a race that caused crashes in
audioresample when shutting down a pipeline (#420106).
Original commit message from CVS:
* configure.ac:
* docs/gst/gstreamer-sections.txt:
* gst/Makefile.am:
* gst/gstconfig.h.in:
* gst/gstobject.c: (gst_object_class_init),
(gst_signal_object_class_init):
* gst/gstobject.h:
2nd attempt to have a xml-less build as a joined effort of #413123
and #421480.
Original commit message from CVS:
* gst/parse/Makefile.am:
Now hopefully fix the build failures by setting proper rule
dependencies and moving instead of copying.
Original commit message from CVS:
* tests/benchmarks/complexity.gnuplot:
* tests/benchmarks/complexity.scm:
* tests/benchmarks/mass-elements.gnuplot:
* tests/benchmarks/mass-elements.scm:
Total licensification.
Original commit message from CVS:
* tests/benchmarks/complexity.c:
* tests/benchmarks/mass-elements.c:
Change licence to LGPL as granted by Benjamin and Andy.
Original commit message from CVS:
* gst/parse/Makefile.am:
Fix typo and use outdated sources if the flex/bison sources are newer
than the pregenerated ones but flex is too old. Print a warning in
that case. This should fix the build on the build bot.
Original commit message from CVS:
Patch by: Marc-Andre Lureau <marcandre dot lureau at gmail dot com>
* gst/parse/Makefile.am:
* gst/parse/grammar.y:
* gst/parse/parse.l:
Make the parser reentrant and recursively callable. This requires flex
>= 2.5.31, for older versions pregenerated sources are used as we
can't bump the build dependency. Finally fixes#349180.
* gst/gstparse.c: (gst_parse_launch):
Drop the HAVE_MT_SAVE_FLEX #ifdefs as we always use a new enough flex
now anyway.
* docs/gst/Makefile.am:
* docs/gst/Makefile.am:
* gst/parse/grammar.tab.pre.c: (__gst_parse_strdup),
(__gst_parse_strfree), (__gst_parse_link_new),
(__gst_parse_link_free), (__gst_parse_chain_new),
(__gst_parse_chain_free), (SET_ERROR), (YYPRINTF),
(gst_parse_element_set), (gst_parse_free_link),
(gst_parse_found_pad), (gst_parse_perform_delayed_link),
(gst_parse_perform_link), (yytnamerr), (yysyntax_error), (yyerror),
(_gst_parse_launch):
* gst/parse/grammar.tab.pre.h:
* gst/parse/lex._gst_parse_yy.pre.c: (PRINT), (yy_get_next_buffer),
(yy_get_previous_state), (yy_try_NUL_trans), (input),
(_gst_parse_yyrestart), (_gst_parse_yy_switch_to_buffer),
(_gst_parse_yy_load_buffer_state), (_gst_parse_yy_create_buffer),
(_gst_parse_yy_delete_buffer), (_gst_parse_yy_init_buffer),
(_gst_parse_yy_flush_buffer), (_gst_parse_yypush_buffer_state),
(_gst_parse_yypop_buffer_state),
(_gst_parse_yyensure_buffer_stack), (_gst_parse_yy_scan_buffer),
(_gst_parse_yy_scan_string), (_gst_parse_yy_scan_bytes),
(yy_fatal_error), (_gst_parse_yyget_extra),
(_gst_parse_yyget_lineno), (_gst_parse_yyget_column),
(_gst_parse_yyget_in), (_gst_parse_yyget_out),
(_gst_parse_yyget_leng), (_gst_parse_yyget_text),
(_gst_parse_yyset_extra), (_gst_parse_yyset_lineno),
(_gst_parse_yyset_column), (_gst_parse_yyset_in),
(_gst_parse_yyset_out), (_gst_parse_yyget_debug),
(_gst_parse_yyset_debug), (_gst_parse_yyget_lval),
(_gst_parse_yyset_lval), (_gst_parse_yylex_init),
(yy_init_globals), (_gst_parse_yylex_destroy), (yy_flex_strncpy),
(yy_flex_strlen), (_gst_parse_yyalloc), (_gst_parse_yyrealloc),
(_gst_parse_yyfree):
If the installed flex version is too old use pre-generated parser
sources. These pre-generated parser sources are always updated when
the actual flex/bison sources change but require everybody who wants
to change something in the parser to have flex >= 2.5.31 installed.
Original commit message from CVS:
* configure.ac:
* gst/Makefile.am:
* gst/gstconfig.h.in:
Drop libxml2 dependency when building with
--enable-binary-registry --disable-loadsave
Original commit message from CVS:
* gst/gstregistrybinary.c: (gst_registry_binary_write_cache),
(gst_registry_binary_read_cache):
* gst/gstregistrybinary.h:
Remove unnecessary <sys/mman.h> include which broke the win32 build
with MingW; move includes from header file to .c file, even if the
header file isn't installed; use g_strerror() where UTF-8 strings
are expected, such as in GST_DEBUG messages.
Original commit message from CVS:
* docs/libs/gstreamer-libs-sections.txt:
Remove bogus addition for API I didn't end up keeping.
* libs/gst/base/gstbasesrc.h:
Mention Since: 0.10.13 in the documentation.
Add the API keyword to the previous ChangeLog entry.
Original commit message from CVS:
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/base/gstbasesrc.c: (gst_base_src_class_init),
(gst_base_src_default_prepare_seek_segment),
(gst_base_src_prepare_seek_segment), (gst_base_src_perform_seek):
* libs/gst/base/gstbasesrc.h:
Allow basesrc derived classes to execute seeks in other formats
by providing a prepare_seek_segment vmethod. Sub-classes can choose
to prepare the GstSegment in any format that their perform_seek method
will be able to understand. The default implementation provides the
old behaviour of attempting to convert the seek offsets to the
configured native format.
Original commit message from CVS:
* gst/gstelement.c: (gst_element_get_state_func):
Don't output the same debug statement twice.
* libs/gst/base/gstadapter.c: (gst_adapter_try_to_merge_up),
(gst_adapter_peek), (gst_adapter_take_buffer):
Optimise the case where we have buffers at the head of the queue that
can be joined quickly (because they're contiguous sub-buffers) by
merging them together rather than copying data out into new memory.
* gst/parse/grammar.y:
* tests/check/pipelines/parse-launch.c:
Fix a leak in an error path for parse_launch, and add a check
for it to the testsuite.
Original commit message from CVS:
* plugins/elements/gstmultiqueue.c: (gst_multi_queue_release_pad):
Don't deadlock when releasing a pad - gst_pad_set_active may try
and take the multiqueue lock too.
Original commit message from CVS:
* docs/faq/gst-uninstalled:
don't get empty paths on the PATH variables
* gst/gstpad.c (gst_pad_is_active, gst_pad_set_blocked_async):
Don't format for the uncommon terminal width of 84 characters.
Original commit message from CVS:
* gst/gstpipeline.c: (reset_stream_time),
(gst_pipeline_change_state), (gst_pipeline_set_new_stream_time):
Only try to select a different pipeline clock when we went back to
PAUSED and not when we merely got flushed.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c:
(gst_base_sink_queue_object_unlocked), (gst_base_sink_event):
Fix leak caused when refusing newsegment after EOS.
* plugins/elements/gstfakesink.c: (gst_fake_sink_class_init),
(gst_fake_sink_init), (gst_fake_sink_set_property),
(gst_fake_sink_get_property), (gst_fake_sink_preroll),
(gst_fake_sink_render), (gst_fake_sink_change_state):
* plugins/elements/gstfakesink.h:
Add num-buffers property to make the element generate EOS after a
configurable amount of buffers.
API: fakesink::num-buffers property.
* tests/check/elements/fakesink.c: (GST_START_TEST),
(fakesink_suite):
Fix GstBus leak in test.
Test for fakesink num-buffers.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c:
(gst_base_sink_queue_object_unlocked), (gst_base_sink_event),
(gst_base_sink_change_state):
Don't accept anything after an EOS, return UNEXPECTED instead.
* tests/check/elements/fakesink.c: (GST_START_TEST),
(fakesink_suite):
Unit test for new EOS behaviour.
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
* gst/gstclock.c: (gst_clock_adjust_unlocked),
(gst_clock_unadjust_unlocked), (gst_clock_set_calibration):
* gst/gstclock.h:
Improve _adjust_unlocked() so that it overflows less.
Add gst_clock_unadjust_unlocked to convert from external time to
internal time based on calibration.
Add some more debug.
API: GstClock::gst_clock_unadjust_unlocked()
Original commit message from CVS:
Patch by: Tommi Myöhänen <ext-tommi dot myohanen at nokia dot com>
* plugins/elements/gstmultiqueue.c: (gst_multi_queue_release_pad):
Deactivate pads and free GstSingleQueue with gst_single_queue_free()
when releasing sink pad. Fixes#425400.
Original commit message from CVS:
* docs/random/ensonic/dynlink.txt:
More work on proposal for new core api.
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/base/gstbasetransform.h:
API: GST_BASE_TRANSFORM_LOCK/UNLOCK added
* libs/gst/controller/gstcontroller.c:
(on_object_controlled_property_changed),
(gst_controller_sync_values),
(gst_controller_set_interpolation_mode):
* libs/gst/controller/gstcontroller.h:
Less verbose logging add docs for unimplemented parts and correctly
return when using unavailable parts.
Original commit message from CVS:
* gst/gstclock.c: (gst_clock_set_master), (do_linear_regression):
Move all the debug to the CLOCK category, and associate it with
the clock object.
Original commit message from CVS:
* libs/gst/base/gstadapter.c: (gst_adapter_take_buffer):
Make take_buffer a bit quicker by removing redundant checks
caused by calling gst_adapter_take.
Original commit message from CVS:
* plugins/elements/gstmultiqueue.c: (gst_single_queue_free):
Don't leak GCond.
* tests/check/Makefile.am:
* tests/check/elements/.cvsignore:
* tests/check/elements/multiqueue.c: (setup_multiqueue),
(GST_START_TEST), (multiqueue_suite):
Add some dead simple unit tests for the 'multiqueue' element
(some bits don't work yet and are disabled for now).
Original commit message from CVS:
* gst/gstelement.c: (gst_element_get_request_pad),
(gst_element_class_get_request_pad_template):
Make gst_element_get_request_pad() create request pads only for
request pad templates and not for, say, sometimes pad templates.
Original commit message from CVS:
* docs/design/draft-klass.txt:
Add example that needs more thinking.
* docs/design/draft-missing-plugins.txt:
More thoughts about wtrapper plugins.
* docs/random/ensonic/embedded.txt:
* docs/random/ensonic/profiling.txt:
More design work.
Original commit message from CVS:
* libs/gst/base/gstbasesrc.c: (gst_base_src_get_range),
(gst_base_src_loop):
Only push the segment events in the PLAYING state for live sources.
Original commit message from CVS:
* gst/gstpipeline.c: (gst_pipeline_change_state):
Modify the clock distribution path in PAUSED->PLAYING so that we
never attempt to choose a new clock unless we're actually leaving
the PAUSED state for the first time. This prevents choosing a
different clock when the state_change gets called for a 2nd time due
to some element doing an async state change.
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_set_caps), (gst_pad_configure_sink),
(gst_pad_configure_src), (gst_pad_alloc_buffer_full),
(gst_pad_chain_unchecked), (gst_pad_push):
Revert last commit. This needs some more thoughts.
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_set_caps), (gst_pad_alloc_buffer_full),
(gst_pad_chain_unchecked), (gst_pad_push):
Check in set_caps if the caps are compatible with the pad and remove
two functions that are redundant now. Fixes#421543.
Original commit message from CVS:
* tests/check/gst/gstsystemclock.c: (GST_START_TEST),
(mixed_thread), (mixed_async_cb), (gst_systemclock_suite):
Unref some more to make valgrind happy.
Original commit message from CVS:
* gst/gstsystemclock.c: (gst_system_clock_id_wait_jitter_unlocked),
(gst_system_clock_id_wait_jitter),
(gst_system_clock_id_wait_async), (gst_system_clock_id_unschedule):
Fix anoying regression that survived a few releases. When adding an
async entry while blocking on a sync entry, the sync entry will unblock
but still be busy, so it should continue to wait instead of returning
_BUSY to the app.
Add some comments here and there.
* tests/check/gst/gstsystemclock.c: (mixed_thread),
(mixed_async_cb), (GST_START_TEST), (gst_systemclock_suite):
Add testcase for this.
Original commit message from CVS:
* libs/gst/base/gstbasesrc.c: (gst_base_src_get_range):
Handle errors from the clock sync better, only UNSCHEDULED indicates a
WRONG_STATE and can silently pause the task. All other cases should
error out.
Original commit message from CVS:
Patch by: <syrjala at sci dot fi>
* gst/gstpad.c: (gst_pad_alloc_buffer_full), (gst_pad_send_event):
Fix possible deadlock if pad eventfunc is not specified. Fixes#421177.
Improve debugging.
Original commit message from CVS:
* gst/gstbin.c: (gst_bin_get_type), (gst_bin_element_set_state):
Prepare for release where we warn against possible app breakage in the
case of live pipelines along with an env var to enable/disable live
preroll mode (GST_COMPAT=[no-]live-preroll).
Original commit message from CVS:
* plugins/elements/gstidentity.c (gst_identity_check_imperfect_offset):
So we should use correct constants for checking for None offset.
Original commit message from CVS:
Patch by: Olivier Crete <tester at tester dot ca>
* gst/gstelement.c: (gst_element_sync_state_with_parent):
Look at the pending state too when syncing the element state to the
parent. Fixes#420133.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_set_flushing),
(gst_base_sink_change_state):
* libs/gst/base/gstbasesink.h:
* libs/gst/base/gstbasesrc.c: (gst_base_src_perform_seek),
(gst_base_src_default_event), (gst_base_src_unlock_stop),
(gst_base_src_deactivate):
* libs/gst/base/gstbasesrc.h:
Add ::unlock_stop to basesrc and basesink. This allows an opportunity
for sub-classes to correctly clear any state they set trying to
unlock, such as clearing out unlock commands from a command fd.
* plugins/elements/gstfdsink.c: (gst_fd_sink_class_init),
(gst_fd_sink_render), (gst_fd_sink_unlock),
(gst_fd_sink_unlock_stop):
* plugins/elements/gstfdsrc.c: (gst_fd_src_class_init),
(gst_fd_src_init), (gst_fd_src_unlock), (gst_fd_src_unlock_stop),
(gst_fd_src_create), (gst_fd_src_get_size), (gst_fd_src_do_seek):
Implement unlock_stop in fdsrc and fdsink.
Implement seeking in fdsrc when a seekable fd is passed, as in
gst-launch-0.10 fdsrc ! ... ! xvimagesink < /path/to/file
Original commit message from CVS:
Patch by: Evan Nemerson <evan at coeus dash group dot com>
* gst/gstelement.c: (gst_element_class_init):
Fix pad-added and pad-removed signal signatures so that the pad type is
stated as GST_TYPE_PAD instead of G_TYPE_OBJECT. Fixes#419851.
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
Add new element field and method.
* gst/gstbin.c: (gst_bin_class_init), (gst_bin_init),
(bin_remove_messages), (gst_bin_add_func), (gst_bin_remove_func),
(gst_bin_recalc_state), (gst_bin_get_state_func),
(gst_bin_element_set_state), (gst_bin_change_state_func),
(gst_bin_continue_func), (bin_bus_handler),
(bin_push_state_continue), (bin_handle_async_start),
(bin_handle_async_done), (gst_bin_handle_message_func):
Make async state changes a bit smarter by using new ASYNC_START and
ASYNC_DONE messages. This reduces the number of times we run the state
recalculation thread.
Don't change state of element with a pending ASYNC_START message.
Deprecate STATE_DIRTY messages.
* gst/gstelement.c: (gst_element_init), (gst_element_send_event),
(gst_element_get_state_func), (gst_element_continue_state),
(gst_element_lost_state), (gst_element_set_state_func),
(gst_element_change_state):
* gst/gstelement.h:
Keep the state that was last set by the app in a new element field.
Don't allow state changes when handling an element event.
Post ASYNC_START and ASYNC_DONE messages.
Change lost_state so that we go to PAUSED and wait for the parent to set
us to PLAYING again (so latency calculation can be performed)
Export gst_element_change_state() method so that subclasses can use it.
API: gst_element_change_state()
API: GST_STATE_TARGET
* gst/gstpipeline.c: (gst_pipeline_class_init),
(reset_stream_time), (gst_pipeline_change_state),
(gst_pipeline_handle_message), (gst_pipeline_set_new_stream_time):
Using the new ASYNC_START message we can reset the base_time when
needed. This can then be used to implement base_time redistribution in
flushing seeks so that we can remove the explicit seek handling.
Perform latency query and configuration when going to PLAYING.
* libs/gst/base/gstbasesink.c: (gst_base_sink_commit_state),
(gst_base_sink_query), (gst_base_sink_change_state):
Post new ASYNC_START/ASYNC_DONE messages.
* tests/check/generic/sinks.c: (GST_START_TEST):
Fix test because the bin will not set the async element to PLAYING right
away.
* tests/check/gst/gstbin.c: (pop_async_done), (GST_START_TEST):
Make the message check a little stronger.
Handle ASYNC messages.
* tests/check/pipelines/cleanup.c: (GST_START_TEST):
* tests/check/pipelines/simple-launch-lines.c: (GST_START_TEST):
Expect ASYNC_DONE messages.
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
* gst/gstmessage.c: (gst_message_new_async_start),
(gst_message_new_async_done), (gst_message_parse_info),
(gst_message_parse_async_start):
* gst/gstmessage.h:
Add ASYNC_START and ASYNC_DONE messages to prepare for latency
support.
Original commit message from CVS:
* tools/gst-inspect.c:
(print_plugin_automatic_install_info_codecs):
Now that we don't check for the 'Codec' keyword any longer in the
klass, we shouldn't spew a warning if the klass isn't a decoder or
encoder (since it might be a Source/Network, for example).
Original commit message from CVS:
* tools/gst-inspect.c:
(print_plugin_automatic_install_info_codecs):
Don't require decoder/demuxer/depayloader elements or
encoder/muxer/paylader elements to have 'Codec' as part of their
factory class string when introspecting a plugin's capabilities.
draft-klass.txt mentions that it might be removed in future, and
flump3dec doesn't have it as part of its class string, so chances
are others might also not have it.
Original commit message from CVS:
* gst/gstchildproxy.c: (gst_child_proxy_get_property),
(gst_child_proxy_set_property):
Invert precondition check to be alike the ones in the mimiced gobject
api.
Original commit message from CVS:
* docs/design/draft-tagreading.txt:
* docs/random/ensonic/audiobaseclasses.txt:
Do some Architect work.
* gst/gstobject.c: (gst_object_set_name):
Add a WARNING.
* gst/gstpad.c:
Add docs that point from gst_pad_get_range to gst_pad_pull_range
Original commit message from CVS:
* gst/gstsystemclock.c: (gst_system_clock_init),
(gst_system_clock_start_async), (gst_system_clock_id_wait_async):
Defer starting the async system clock thread until the first async
wait is scheduled. Fixes#414986.
Original commit message from CVS:
* plugins/elements/gstmultiqueue.c: (gst_multi_queue_finalize),
(gst_single_queue_free):
Fix small leak (free GstSingleQueue structure too, not only contents).
Original commit message from CVS:
* gst/gstbin.c:(gst_bin_add):
Use GST_STR_NULL to prevent NULL pointer to be passed to GST_CAT_DEBUG.
* win32/common/libgstbase.def:
* win32/common/libgstreamer.def:
Add new exported functions.
Original commit message from CVS:
* plugins/elements/gstidentity.c: (gst_identity_class_init),
(gst_identity_init), (gst_identity_check_perfect),
(gst_identity_check_imperfect_timestamp),
(gst_identity_check_imperfect_offset), (gst_identity_transform_ip),
(gst_identity_set_property), (gst_identity_get_property):
* plugins/elements/gstidentity.h:
Separate out check-imperfect-timestamp and check-imperfect-offset.
Put back check-perfect as it was to keep compatibility.
Original commit message from CVS:
* gst/gstelement.c: (gst_element_dispose):
There's no need to warn if VOID_PENDING is not NONE here, as
long as the state is NULL it's ok, and that's checked immediately
above.
Original commit message from CVS:
2007-03-08 Zaheer Abbas Merali <zaheerabbas at merali dot org>
* plugins/elements/gstidentity.c: (gst_identity_check_perfect):
Fix check for perfect stream to ignore buffers with -1
offsets/offset ends when checking data contiguity.
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_sink_eventfunc),
(gst_base_transform_handle_buffer), (gst_base_transform_chain),
(gst_base_transform_activate):
* libs/gst/base/gstbasetransform.h:
Add support for dropping buffers with custom GstFlowReturn.
Set DISCONT flags on outgoing buffers based on QoS, incomming DISCONT
buffers or dropped buffers.
* docs/libs/gstreamer-libs-sections.txt:
docs for new custom return code.
* plugins/elements/gstidentity.c: (gst_identity_transform_ip):
Use drop support in base class to implement drop-probability.
Original commit message from CVS:
2007-03-07 Zaheer Abbas Merali <zaheerabbas at merali dot org>
* plugins/elements/gstidentity.c: (gst_identity_check_perfect):
Only post bus message at max, once per buffer received.
Original commit message from CVS:
2007-03-07 Zaheer Abbas Merali <zaheerabbas at merali dot org>
* plugins/elements/gstidentity.c: (gst_identity_check_perfect):
Rename non-perfect to imperfect for Mike and for the sanctity of
the language.
Also make sure bus message gets emitted for data-incontiguities.
Original commit message from CVS:
2007-03-07 Zaheer Abbas Merali <zaheerabbas at merali dot org>
* plugins/elements/gstidentity.c: (gst_identity_check_perfect),
(gst_identity_start):
* plugins/elements/gstidentity.h:
Emit bus message if check-perfect is true and we encounter a
non-perfect stream between 2 consecutive buffers.
Fixes#415394.
Original commit message from CVS:
* gst/gstvalue.c: (gst_value_transform_object_string),
(_gst_value_initialize):
Implement GstObject -> string transform so we print object names
when serializing GValues containing GstObjects.
Original commit message from CVS:
* gst/gstelement.c: (gst_element_message_full),
(gst_element_set_locked_state), (gst_element_get_state_func),
(gst_element_change_state):
Handle INFO messages from the GST_ELEMENT_INFO macro as well.
Documentation updates.
Small code cleanups.
* gst/gstmessage.c: (gst_message_new_info),
(gst_message_parse_info):
* gst/gstmessage.h:
API: gst_message_new_info()
API: gst_message_parse_info()
Add INFO message create and parse code.
Original commit message from CVS:
* gst/gstbin.c: (bin_query_min_max_init), (bin_query_latency_fold),
(bin_query_latency_done):
Also report the live parameter of a latency query.
Original commit message from CVS:
* tests/check/generic/states.c: (GST_START_TEST), (states_suite):
Copy the current generic/states example from -base and adapt so
we can use the exact same code everywhere.
Check a STATES_IGNORE_ELEMENTS env var which can be used
to ignore certain element factories for this test, which is
what is being done in -base
* tests/check/Makefile.am:
Mention this environment variable.
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
* gst/gstbus.c: (gst_bus_init), (gst_bus_dispose), (gst_bus_post),
(gst_bus_timed_pop), (gst_bus_pop):
* gst/gstbus.h:
API: gst_bus_timed_pop()
Implement gst_bus_timed_pop() to do a blocking timed wait for a
message to arrive on the bus.
* tests/check/gst/gstbus.c: (GST_START_TEST), (pop_thread),
(gst_bus_suite):
Two unit tests for new _timed_pop() function.
Original commit message from CVS:
* gst/gstpipeline.c: (gst_pipeline_change_state),
(gst_pipeline_provide_clock_func), (gst_pipeline_set_delay):
Don't ref a NULL clock in _provide_clock_func().
Don't allow an INVALID delay.
Don't try to calculate base_time with an invalid start_time.
Also distribute and notify a NULL clock when it was selected.
* tools/gst-launch.c: (event_loop):
Don't crash when a NULL clock was selected in the pipeline.
Original commit message from CVS:
* docs/design/Makefile.am:
* docs/design/draft-missing-plugins.txt:
* docs/random/draft-missing-plugins.txt:
Some small updates: update plugin system identifier prefix
('gstreamer.net' to 'gstreamer'), mention our new install
API in libgstbaseutils rather than libgimme-codec, add
reference to the online docs.
Original commit message from CVS:
* win32/common/config.h:
Pretty sure Bill never made a powerpc version. Powerpc hackers,
use moap cl ci to only check in what is mentioned in the ChangeLog.
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
* gst/gstelement.h:
Fix up documentation to link to the correct GstGError section.
Add GST_ELEMENT_INFO macro since someone else added a Info message.
Original commit message from CVS:
* tools/gst-launch.c: (event_loop):
Make sure that we actually show the important message part of a
warning message.
No need to check if the gerror is not NULL to free; first of all
g_free accepts NULL; and second the default error handler would
segfault if gerror was NULL.
Original commit message from CVS:
* docs/design/part-gstghostpad.txt:
* gst/gstghostpad.c: (gst_ghost_pad_dispose),
(gst_ghost_pad_new_full):
Make the ghostpad a parent of the internal pad again for better backward
compatibility. Don't write code that relies on this however.
* gst/gstpad.c: (gst_pad_activate_pull), (gst_pad_activate_push),
(gst_pad_link_check_hierarchy):
Require that parents should be GstElements in the hierarchy check.
Original commit message from CVS:
* docs/design/part-gstghostpad.txt:
* gst/gstghostpad.c: (gst_ghost_pad_class_init),
(gst_ghost_pad_internal_do_activate_push),
(gst_ghost_pad_internal_do_activate_pull),
(gst_ghost_pad_do_activate_push), (gst_ghost_pad_do_activate_pull),
(gst_ghost_pad_do_link), (gst_ghost_pad_dispose),
(gst_ghost_pad_new_full), (gst_ghost_pad_set_target):
Do not set the internal pad as a parent anymore so we can avoid
hierarchy linking errors when the ghostpad has no parent yet. This also
fixes failed activation because of unlinked internal pads, which in
turn fixes the impossible case where you have to activate a pad before
you can add it to a running element.
Also fix the docs.
* gst/gstpad.c: (pre_activate), (post_activate),
(gst_pad_set_active), (gst_pad_activate_pull),
(gst_pad_activate_push), (gst_pad_check_pull_range):
Add some more debug info.
Mark activation mode in pre_activate so that we don't try to activate in
endless loops. Fixes#385084.
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c: (gst_base_transform_init),
(gst_base_transform_check_get_range):
Implement a checkgetrange function instead of relying on the default
core behaviour that assumes we can operate in pull mode if we have a
getrange function. First step at fixing #385084.
Original commit message from CVS:
* gst/gstchildproxy.h:
* libs/gst/base/gstbasesink.h:
* libs/gst/base/gstbasesrc.h:
* libs/gst/base/gstbasetransform.h:
More docs coverage and some ChangeLog surgery (add missing names)
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_get_internal_links_default),
(gst_pad_dispatcher):
Improve debugging of default pad dispatcher and query functions.
Original commit message from CVS:
* docs/design/part-seeking.txt:
Some small update.
* gst/gstsegment.c: (gst_segment_set_seek):
Revert old bogus change that should make seeking work again.
Original commit message from CVS:
* docs/random/ensonic/dynlink.txt:
* docs/random/ensonic/interfaces.txt:
* docs/random/ensonic/receipies.txt:
Possible dynamic reconnection api, plus some type fixes the other two
docs.
Original commit message from CVS:
* plugins/elements/gstfilesink.c: (gst_file_sink_uri_set_uri):
* plugins/elements/gstfilesrc.c: (gst_file_src_uri_set_uri):
Also check for an absolute path following file:// in the filesrc
element. Remove redundant check and call g_path_is_absolute() on the
unescaped location.
Original commit message from CVS:
* docs/design/draft-klass.txt:
Add existing category analysis.
* gst/gstcaps.c:
Fix doc example, framerate is a fraction.
Original commit message from CVS:
* docs/design/draft-latency.txt:
Small update.
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/base/gstbasesink.c: (gst_base_sink_class_init),
(gst_base_sink_get_latency), (gst_base_sink_query_latency),
(gst_base_sink_wait_clock), (gst_base_sink_send_qos),
(gst_base_sink_perform_qos), (gst_base_sink_queue_object_unlocked),
(gst_base_sink_chain_unlocked), (gst_base_sink_send_event),
(gst_base_sink_get_position), (gst_base_sink_query),
(gst_base_sink_change_state):
* libs/gst/base/gstbasesink.h:
API: gst_base_sink_query_latency() to let subclasses query the upstream
latency.
API: gst_base_sink_get_latency() to let subclasses query the configured
latency in the sink.
Implement query and set latency.
Update some docs.
As spotted by Will Newton <will dot newton at gmail dot com>: Make sure we
don't continue preroll when we are flushing. Fixes#405284.
* tests/check/pipelines/stress.c: (change_state_timeout),
(quit_timeout), (GST_START_TEST), (stress_suite):
Test for #405284.
Original commit message from CVS:
* gst/gstbin.h:(gst_bin_get_by_interface),
(gst_bin_iterate_all_by_interface):
Replace interface parameter name by iface as interface is
a reserved keyword in Visual Studio for C++ projects so it removes
a build error for application developpers using VS.
* plugins/elements/gstfilesrc.c:(gst_file_src_uri_set_uri):
Fix a bug on Windows in uri format check. Now the prefix checked
is file:// and next we check if the path after file:// is absolute.
* win32/common/libgstbase.def:
* win32/common/libgstdataprotocol.def:
* win32/common/libgstgstreamer.def:
Add new exported functions.
Original commit message from CVS:
2007-02-09 Andy Wingo <wingo@pobox.com>
* tests/check/pipelines/simple-launch-lines.c
(simple_launch_lines_suite, test_tee): Disable tee test until I
have time to fix it :-(
Original commit message from CVS:
2007-02-09 Andy Wingo <wingo@pobox.com>
* tests/check/Makefile.am (noinst_HEADERS):
* tests/check/libs/libsabi.c:
* tests/check/libs/struct_ppc32.h: Add ABI checks for PPC32.
* tests/check/gst/gstabi.c:
* tests/check/gst/struct_ppc32.h: Add ABI checks for PPC32.
Original commit message from CVS:
2007-02-09 Andy Wingo <wingo@pobox.com>
* tests/check/pipelines/simple-launch-lines.c (test_tee): Add
tests for push and pull tee behavior.
* plugins/elements/gsttee.h:
* plugins/elements/gsttee.c: Describe has-sink-loop better, and
mark as deprecated as well as unimplemented. It was a crack idea.
Add support for tee operating in pull mode, off by default.
Original commit message from CVS:
2007-02-09 Andy Wingo <wingo@pobox.com>
* gst/gstregistryxml.c (load_feature, load_plugin): Drop some
normal-case logs down to LOG, raise errors to WARNING.
(gst_registry_xml_read_cache): Don't log before calling a function
that logs.
* gst/gstregistry.c (gst_registry_finalize): Less debug on program
exit (registry finalize).
(gst_registry_add_plugin, gst_registry_add_feature): No need for a
DEBUG log when we emit signals that people don't even have the
chance to connect to.
(gst_registry_scan_path_level): Less logging in the normal case.
Original commit message from CVS:
Patch by: Michal Benes <michal dot benes at itonis dot tv>
* plugins/elements/gstfilesrc.c: (gst_file_src_create_read):
Correctly generate EOS for non-seekable files. We don't have a total
length for them and would get an unexpected end of file if we only
special-cased for regular files. (Fixes: #404569)
Original commit message from CVS:
* tests/check/elements/filesrc.c: (GST_START_TEST),
(filesrc_suite):
Add unit test for the GstURIHandler interface in filesrc. This also
tests the newly added file://localhost/foo/bar support.
Original commit message from CVS:
* gst/gstelementfactory.h:
The klass string is not a hierarchy. Add reference to the design doc
for more information and common types.
Original commit message from CVS:
* docs/design/draft-latency.txt:
Slight redesign to allow for dynamic latency adjustments.
* docs/design/part-negotiation.txt:
Fix some typos.
Original commit message from CVS:
reviewed by: Wim Taymans <wim@fluendo.com>
* plugins/elements/gstfilesink.c: (gst_file_sink_uri_set_uri):
* plugins/elements/gstfilesrc.c: (gst_file_src_uri_set_uri):
Allow file://localhost/foo/bar URLs and correctly fail for every other
hostname that one sets. This was gnomevfssrc is linked for those if
installed as it can handle it (#403172)
Original commit message from CVS:
reviewed by: Tim-Philipp Müller <tim at centricular dot net>
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_finalize),
(unref_data), (gst_collect_pads_add_pad_full):
* libs/gst/base/gstcollectpads.h:
Don't put the previously added destroy notify in the GstCollectData
struct as all it's padding is already used and we don't want to break
ABI. Instead put in the pad's GObject data for now. This should be
cleaned up for 0.11 (#402393).
Original commit message from CVS:
reviewed by: Wim Taymans <wim@fluendo.com>
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_finalize),
(unref_data), (gst_collect_pads_add_pad),
(gst_collect_pads_add_pad_full):
* libs/gst/base/gstcollectpads.h:
API: Add function to specify a destroy notification for custom
GstCollectData when adding new pads in GstCollectPads (#402393).
Original commit message from CVS:
* plugins/elements/gsttypefindelement.c:
(gst_type_find_element_chain_do_typefinding),
(gst_type_find_element_change_state):
Don't leak found caps in chain function (no idea why that never
showed up as a leak anywhere).
Original commit message from CVS:
* docs/gst/gstreamer.types.in:
* gst/gstregistry.c: (gst_registry_class_init):
Document registry signals and make gtk-doc pick them up (#401381).
Original commit message from CVS:
* docs/pwg/building-testapp.xml:
Add some audioconverts and audioresample to the pipeline, and some
more comments and error handling.
Original commit message from CVS:
Patch by: Jindrich Makovicka <jindrich.makovick at itonis dot tv>
* plugins/elements/gstfilesrc.c: (gst_file_src_start):
If not using mmap'ed files try to seek to the end instead of the
start to determine whether we can seek at all. This fixes the case
of 2GB+ files over NFS, where seeks in the first 2GB can succeed but
seeks for everything afterwards fail. Fixes#400656
Original commit message from CVS:
* gst/gstcaps.c: (_gst_caps_free), (gst_static_caps_get):
Add some refcount debugging.
Make gst_static_caps_get threadsafe, which is needed when autoplugging
in multiple streaming threads.
Original commit message from CVS:
Patch by: David Schleef <ds at schleef dot org>
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/base/gstadapter.c: (gst_adapter_copy):
* libs/gst/base/gstadapter.h:
API: gst_adapter_copy() that can reduce the amount of memcpy when
getting data from the adapter. Fixes#388201.
Original commit message from CVS:
* gst/gstregistrybinary.c: (gst_registry_binary_read_cache):
In print statements, "%x" is for guint. Fixes build on macosx.
Original commit message from CVS:
* plugins/elements/gstmultiqueue.c:
(gst_multi_queue_loop):
Small fix.
(single_queue_overrun_cb), (single_queue_underrun_cb),
(single_queue_check_full), (gst_single_queue_new):
Implement single queue growth system.
This uses the extra-size properties, and will grow single queues by
that much if one goes full whereas there are others empty. This is
called extra-mode in the code.
When a single queue's levels go back below the initial max-size
limits, it is no longer in extra-mode. This is to ensure we don't
consume too much memory.
Fixes#399875
Original commit message from CVS:
* gst/gst.c: (gst_init_get_option_group):
Make warning about late g_thread_init() calls a bit more explicit,
so that it's more obvious to application developers what they need
to do if a user files a bug against their application.
Original commit message from CVS:
* plugins/elements/gstmultiqueue.c:
(gst_multi_queue_src_activate_push), (gst_single_queue_new):
Remove previous hack of unsetting the flushing flag for the source pad
instead of activating it. Instead, fix the source pad activate function
so that it no longer depends on having a parent set or not.
Original commit message from CVS:
Patch by: Carlos Sanmartin Dominguez <csanmartin@igalia.com>
* docs/manual/basics-bus.xml:
Fix example code, gst_element_unref() doesn't exist any longer.
Original commit message from CVS:
* docs/faq/gst-uninstalled:
Add gst-plugins-base/gst/utils/ to LD_LIBRARY_PATH so that plugins
depending on libgstbaseutils can work in uninstalled environment.
Original commit message from CVS:
* gst/gsttaglist.h:
* gst/gsttagsetter.c:
Add more docs regarding tag merge-modes and when to send tags. Fix 'since'
statement for new tag.
Original commit message from CVS:
* plugins/elements/gstmultiqueue.c: (gst_single_queue_new):
When dynamically creating single queues, activate sinkpad before adding
it.
We should be doing the same thing for the source pad, but we can't
since it would call a method which needs the parent to be set in order
to work propertly. Instead of activating the source pad, we just unset
the flushing flag, which is the minimal requirement for adding a pad
to an element in a state greater than READY.
Original commit message from CVS:
* tests/check/gst/gstabi.c:
* tests/check/gst/struct_hppa.h:
* tests/check/libs/libsabi.c:
* tests/check/libs/struct_hppa.h:
Add ABI structs for HPPA (see #393796).
Original commit message from CVS:
* libs/gst/check/gstcheck.c: (gst_check_abi_list):
Actually write ABI structs to the file specified in the GST_ABI
environment variable, as the message we print claims we would.
Original commit message from CVS:
* gst/gsttaglist.c: (_gst_tag_initialize):
Change tag type from STRING to DOUBLE. Apply ChangeLog surgery for my
previous two entries.
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
* gst/gsttaglist.c: (_gst_tag_initialize):
* gst/gsttaglist.h:
add tag support for beat-per-minute
Original commit message from CVS:
2007-01-13 Andy Wingo <wingo@pobox.com>
* gst/gstpad.c (gst_pad_get_range, gst_pad_pull_range): Allow
getrange() to return buffers with other caps, while we fix
demuxers and typefind, or otherwise change part-negotiation.txt.
Original commit message from CVS:
2007-01-12 Andy Wingo <wingo@pobox.com>
* libs/gst/base/gstbasetransform.c (gst_base_transform_activate):
Factor start/stop into this private function instead of partially
in activate functions and partially in the change_state function.
Fixes setup before the element has changed from READY->PAUSED, as
is the case in pull-mode pipelines.
(gst_base_transform_sink_activate_push)
(gst_base_transform_src_activate_pull): Refactor to use
gst_base_transform_activate().
(gst_base_transform_change_state): Removed, not needed any more.
* libs/gst/base/gstbasesink.c (gst_base_sink_negotiate_pull):
Truncate before fixating.
Original commit message from CVS:
2007-01-12 Andy Wingo <wingo@pobox.com>
* libs/gst/base/gstbasesink.c (gst_base_sink_negotiate_pull):
Don't set_caps() if the result of fixating is ANY, as it's not
supported, and not necessary in the case of a link with no
template caps on either side. Fixes tests/check/libs/basesrc in
some pull-mode tests.
Original commit message from CVS:
2007-01-12 Andy Wingo <wingo@pobox.com>
* libs/gst/base/gstbasetransform.c (_GstBaseTransformPrivate):
(gst_base_transform_init, gst_base_transform_sink_activate_push)
(gst_base_transform_src_activate_pull):
Track the activation mode.
(gst_base_transform_setcaps): In pull mode, when activating the
src pad, after activating the sink pad, activate the sink pad's
peer, as discussed in part-negotiation.txt.
* libs/gst/base/gstbasesrc.h:
* libs/gst/base/gstbasesrc.c (gst_base_src_fixate): Add fixate
vmethod, as in basesink.
* libs/gst/base/gstbasesink.h: Reformat docs, add fixate vmethod.
* libs/gst/base/gstbasesink.c (gst_base_sink_pad_setcaps): In pull
mode, first proxy the setcaps to the peer pad.
(gst_base_sink_pad_fixate): Add a fixate function that calls the
new fixate vmethod.
(gst_base_sink_default_activate_pull): Rename from
gst_base_sink_activate_pull.
(gst_base_sink_negotiate_pull): New function, performs negotiation
in pull mode before calling ::activate_pull().
(gst_base_sink_pad_activate_pull): Actually call the activate_pull
vmethod instead of the default implementation. I have no idea how
this worked before. Negotiate before calling activate_pull.
Original commit message from CVS:
2007-01-12 Andy Wingo <wingo@pobox.com>
* gst/gstpad.c (gst_pad_activate_pull): Refuse to activate unlinked
sink pads in pull mode. In addition to being correct, fixes
filesrc ! decodebin ! identity ! fakesink.
(gst_pad_get_range, gst_pad_pull_range): Don't call
gst_pad_set_caps() if the caps changes; instead error out with
GST_FLOW_NOT_NEGOTIATED, as discussed in part-negotiation.txt.
Original commit message from CVS:
* libs/gst/check/gstbufferstraw.h:
* libs/gst/check/gstcheck.h:
Add G_BEGIN_DECLS and G_END_DECLS. Move GST_CHECK_MAIN where it
belongs.
Original commit message from CVS:
Patch by: René Stadler <mail at renestadler dot de>
* gst/gsttagsetter.c: (gst_tag_setter_merge_tags):
gst_tag_list_merge() returns a new list, so it's not the best idea
to ingore its return value. Effectively meant that tags could only
be merged on a GstTagSetter once using _merge_tags(). Fixes#395554.
Also add function guard to require a non-NULL taglist as input (has
always been so due to gst_tag_list_copy(), just making it explicit).
Original commit message from CVS:
* docs/random/draft-missing-plugins.txt:
Some additions: mention new API that is supposed to be used at the
various stages; short blob about new gst-inspect introspection
option; mention potential future problem with plugins that have
a dynamic list of elements (such as ladspa, pitfdll, libvisual).
Original commit message from CVS:
* tools/gst-inspect.c:
(print_plugin_automatic_install_info_codecs),
(print_plugin_automatic_install_info_protocols),
(print_plugin_automatic_install_info), (main):
Add --print-plugin-auto-install-info option to gst-inspect, so we can
introspect plugin files and get machine-parsable output that corresponds
to the last bit of the missing-plugin installer string (small gotcha:
doesn't take into account ranks).
Original commit message from CVS:
2007-01-10 Andy Wingo <wingo@pobox.com>
* docs/design/part-negotiation.txt: Update with, um, one way that
pull-mode negotiation might work?
* gst/gstpad.h:
* gst/gstpad.c (gst_pad_get_allowed_caps): Remove the restriction
that the pad must be a src pad; makes sense to call it the other
way in pull mode, and the logic is symmetric anyway.
Original commit message from CVS:
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_remove_pad):
unref data at the end when we are done with the pad.
Original commit message from CVS:
* gst/gstregistry.c: (gst_registry_scan_path_level):
Plugin extension on HP-UX is .sl, add that to the list of approved
plugin extensions (see #393796).
* tests/check/gst/gstpad.c: (GST_START_TEST):
ulong => gulong. Fixes compilation with HP-UX compiler.
* tests/check/pipelines/parse-launch.c: (GST_START_TEST):
Fix compilation if valgrind headers are not available.
Original commit message from CVS:
* win32/common/libgstreamer.def:
Add new exported function.
* win32/vs6/libgstbase.dsp:
Add gstdataqueue.c to the build.
* win32/vs6/libgstcoreelements.dsp:
Add gstmultiqueue.c to the build.
Original commit message from CVS:
2007-01-06 Andy Wingo <wingo@pobox.com>
* libs/gst/base/gstbasesink.h: New GstBaseSinkClass vmethod,
activate_pull(), providing for a way to specialize the process of
spawning a thread to pull on the sink pad. There is a default
implementation.
* libs/gst/base/gstbasesink.c (gst_base_sink_pad_activate_pull)
(gst_base_sink_pad_activate_push, gst_base_sink_pad_activate)
(gst_base_sink_init): Renamed pad activation functions (inserting
"_pad" in their names). Refactor to use the new activate_pull
vmethod, as appropriate.
(gst_base_sink_class_init, gst_base_sink_activate_pull): Set the
default activate_pull function to start a task pulling from the
sink pad, as before.
Original commit message from CVS:
2007-01-06 Andy Wingo <wingo@pobox.com>
* gst/gstpad.c (gst_pad_get_range, gst_pad_pull_range): Set caps
on the pads if necessary, as in push()/chain(). Update docs.
Shouldn't affect existing pull() usage as it is currently only
being used on buffers without caps.
Original commit message from CVS:
* gst/gst.c: (gst_init_get_option_group), (gst_init_check),
(init_pre):
Call g_thread_init() first thing in gst_init() / gst_check_init().
When initialisation is done via gst_init_get_option_group() and
GOption parsing, issue a warning if the GLib thread system has not
been initialised yet by the time gst_init_get_option_group() is
called, as it's quite likely other GLib functions such as
g_option_context_new() have been called already then, and
g_thread_init() must be called before any other GLib function. The
application in question must be fixed in that case, since memory
corruption might happen otherwise.
We issue the warning because even if the GLib folks decide to work
around the problem on their end in future, this is still an issue
with all GLib versions >= 2.10.0, so we should warn until we depend
on a GLib version we know to be safe.
Update documentation as well.
Closes bug #391278.
Original commit message from CVS:
* tools/gst-inspect.c: (main):
* tools/gst-launch.c: (main):
* tools/gst-typefind.c: (main):
* tools/gst-xmlinspect.c: (main):
Call g_thread_init() really really early, before any other GLib
function (see #342564 and recent discussion on gtk-devel-list).
Original commit message from CVS:
Patch by: Vincent Torri <vtorri at univ-evry dot fr>
* gst/gst_private.h:
* gst/gstconfig.h.in:
* gst/gstinfo.h:
On win32, all the __declspec stuff for symbol exporting is
apparently only needed with MSVC, but doesn't work with MingW.
Fixes compilation with MingW and #391909.
Original commit message from CVS:
* libs/gst/base/gstbasesrc.c: (gst_base_src_activate_push):
Change some GST_ERROR_OBJECT that aren't really errors to
GST_WARNING_OBJECT in order to reduce terminal spam.
Original commit message from CVS:
* tests/check/Makefile.am:
* tests/check/elements/queue.c: (queue_overrun), (queue_underrun),
(GST_START_TEST), (queue_suite):
enable queue test again, add tests for the leaky behaviour
Original commit message from CVS:
* configure.ac:
* tests/examples/Makefile.am:
Compile adapter test/example only if the required headers are
available (fixes#391915).
Original commit message from CVS:
* gst/gstplugin.c:
Restore the previous signal handler for SIGSEGV instead of
setting to default, since we may have stolen it away from
someone. (i.e., Mono)
Original commit message from CVS:
* gst/gstregistryxml.c: (gst_registry_save_escaped):
Make sure we don't pass non-UTF-8 strings to g_markup_escape(),
since that can lead to random memory corruptions and crashes
(may or may not be related to #383244, #386711, and #386711).
Original commit message from CVS:
* docs/design/part-states.txt:
two tiny additional comments
* gst/gststructure.c:
doc fixing
* tests/check/Makefile.am:
* tests/check/elements/queue.c: (queue_overrun), (queue_underrun),
(GST_START_TEST):
disable test for now, unless it gets fixed
Original commit message from CVS:
* tests/check/elements/.cvsignore:
ignore more
* tests/check/elements/queue.c: (queue_overrun), (queue_underrun),
(GST_START_TEST):
try to narrow test failure
Original commit message from CVS:
* plugins/elements/gstfakesrc.c:
Use g_random_int_range(), since it produces better random
numbers in a range than almost-correct floating point code.
Original commit message from CVS:
* gst/gstsegment.c: (gst_segment_set_seek):
Fine tune the cases where the segment start/stop values are really
updated.
* tests/check/gst/gstsegment.c: (GST_START_TEST):
Add tests for the return values of gst_segment_set_seek().
Original commit message from CVS:
* gst/gst.c:
Docs typo fix.
* plugins/elements/gstqueue.c: (gst_queue_class_init),
(gst_queue_init):
Fix incorrect documentation and flesh it out a bit more.
Set default values for the max properties on the GParamSpec as well,
so it shows up correctly in gst-inspect.
Original commit message from CVS:
* plugins/elements/gstidentity.c: (gst_identity_check_perfect):
Print additional debug info when the stream isn't perfectly
timestamped; don't try to use invalid durations.
Original commit message from CVS:
Patch by: Sjoerd Simons <sjoerd at luon dot net>
* libs/gst/base/gstcollectpads.c: (ref_data), (unref_data),
(gst_collect_pads_add_pad), (gst_collect_pads_remove_pad),
(gst_collect_pads_stop), (gst_collect_pads_event),
(gst_collect_pads_chain):
* libs/gst/base/gstcollectpads.h:
Add refcounting to the collectpads data so we can track when it's safe
to free the data. Fixes#383382.
Original commit message from CVS:
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_add_pad),
(gst_collect_pads_remove_pad):
Automatically activate/deactivate pads when they are added to a
started/stoped collectpads.
Original commit message from CVS:
* gst/gstelement.c: (gst_element_add_pad):
* gst/gstghostpad.c: (gst_ghost_pad_new_full):
* gst/gstpad.c: (gst_pad_init):
Set pads to FLUSHING when they are created. Check, warn and fix when a
demuxer adds an inactive pad to itself when running. Fixes#339326.
Original commit message from CVS:
* gst/gstelement.c: (gst_element_class_init),
(gst_element_default_send_event), (gst_element_send_event),
(gst_element_default_query), (gst_element_query):
Expose default element send_event and query handling as vmethods that
subclasses can chain up to.
Original commit message from CVS:
* gst/gst.c: (init_pre), (init_post):
init_pre() and init_post() might be called via our GOptionGroup or
from gst_init(), and we should skip both of them if we've already
been initialised, otherwise we will init some things twice or add
two default log functions.
Original commit message from CVS:
* docs/manual/basics-bus.xml:
No, gst_main_loop does not exist. Its g_main_loop.
Discovered by somebody who abused the copy-paste technique of coding :)
Original commit message from CVS:
* gst/gstghostpad.c:
Log ghostpad debug stuff to the GST_PADS category as well rather
than just to the default category.
Original commit message from CVS:
* configure.ac:
* gst/gst.c: (init_pre):
Add some basic system details such as OS and architecture
to the debug output if possible, courtesy of uname().
Original commit message from CVS:
* tests/check/gst/gstbin.c: (GST_START_TEST):
It is acceptable to have a refcount of 2 or 3 at this point in the
test, because the pipeline might be just posting its state_change
message. The next line then waits for that message to appear using
bus_poll, so that should be fine too.
Original commit message from CVS:
* gst/gst.c: (ensure_current_registry_forking):
Ignore EINTR when reading from the child registry pipe.
Explicitly ignore the return value from close, since it makes no
difference.
* gst/gstminiobject.c: (gst_mini_object_ref),
(gst_mini_object_unref):
When debugging refcounts, check GST_IS_MINI_OBJECT and warn.
* gst/gstregistry.c: (_priv_gst_registry_remove_cache_plugins):
When removing cached plugins, remove their features too, so they're
not visible after they've disappeared.
* gst/gstutils.c: (prepare_link_maybe_ghosting):
In the unlikely case that we are linking pads with no parents, don't
crash trying to get the non-existent parent bin.
* gst/parse/grammar.y:
Output debug in the PIPELINE category
Original commit message from CVS:
Patch by: René Stadler <mail at renestadler dot de>
* gst/gstclock.c: (gst_clock_new_periodic_id):
Reject invalid clock times for interval of periodic ids.
Fixes ##383506.
Original commit message from CVS:
* gst/gstelementfactory.c: (gst_element_factory_create):
* gst/gstpluginfeature.c: (gst_plugin_feature_load):
* gst/gsttypefindfactory.c: (gst_type_find_factory_call_function):
* tools/gst-inspect.c: (print_element_info):
Fix refcounting of gst_plugin_feature_load to match the docs.
Fixes: #380129
Original commit message from CVS:
Patch by: René Stadler <mail at renestadler dot de>
* gst/gstclock.c: (gst_clock_id_wait):
Make period ids add the interval to the origial requested time instead
of the possibly updated time which can be wrong when there are multiple
waiters for the same id. Fixes#382592.
* gst/gstsystemclock.c: (gst_system_clock_async_thread),
(gst_system_clock_id_wait_jitter_unlocked),
(gst_system_clock_id_wait_jitter):
Fix restart in the async notify thread when an async entry is added to
the front of the list. Fixes#381492.
* tests/check/gst/gstsystemclock.c: (store_callback),
(notify_callback), (GST_START_TEST), (gst_systemclock_suite):
Added test for multiple async waits.
Added test for async wait order.
Original commit message from CVS:
=== release 0.10.11 ===
2006-12-06 Jan Schmidt <thaytan@mad.scientist.com>
* configure.ac:
releasing 0.10.11, "Love never runs on time"
Original commit message from CVS:
* gst/gstvalue.c: (gst_value_compare_fraction):
If someone is foolish enough to compare 2 fractions with denominator =
0, return UNORDERED rather than aborting.
Original commit message from CVS:
* docs/libs/Makefile.am:
* docs/libs/gstreamer-libs.types:
add types of base classes to enable gobject specific stuff in the docs
* docs/random/ensonic/embedded.txt:
more ideas about isolating platform specific things
Original commit message from CVS:
Patch by: Sebastian Droege <slomo at ubuntu dot com>
* libs/gst/check/gstcheck.h:
Fix compilation and running against 0.9.4. Fixes#377332.
Original commit message from CVS:
* gst/gstsegment.c: (gst_segment_set_seek),
(gst_segment_set_newsegment_full), (gst_segment_to_stream_time),
(gst_segment_to_running_time):
Fix boundary checking in to_running_time() and to_stream_time().
Fixes#377183.
* tests/check/gst/gstsegment.c: (GST_START_TEST):
stream and running time can now be calculated for the complete
clipped segment.
Original commit message from CVS:
* docs/random/ensonic/embedded.txt:
* docs/random/ensonic/profiling.txt:
* docs/random/ensonic/receipies.txt:
more thinking
Original commit message from CVS:
Patch by: Mark Nauwelaerts <manauw at skynet dot be>
* gst/gstpad.c:
Fix documentation for gst_pad_dispatcher. Fixes#374475.
Original commit message from CVS:
Patch by: Jonathan Matthew <jonathan at kaolin dot wh9 dot net>
* libs/gst/base/gstbasesrc.c: (gst_base_src_update_length):
Store new length in segment duration so we don't keep on calling the
potentially expensize get_size() call. Fixes#370865.
Original commit message from CVS:
Patch by: Sergey Scobich <sergery.scobich at gmail com>
* win32/common/libgstreamer.def:
Add two missing symbols (#366492).
Original commit message from CVS:
* libs/gst/base/gstadapter.c: (gst_adapter_flush),
(gst_adapter_take_buffer):
Fix format string to use all its arguments.
Remove useless >= check on a guint
Original commit message from CVS:
* tests/examples/adapter/Makefile.am:
* tests/examples/adapter/adapter_test.c: (run_test_take),
(run_test_take_buffer), (run_tests), (main):
Add new files from the previous commit
Original commit message from CVS:
* Makefile.am:
* configure.ac:
* libs/gst/base/gstadapter.c: (gst_adapter_clear),
(gst_adapter_push), (gst_adapter_peek_into), (gst_adapter_peek),
(gst_adapter_flush), (gst_adapter_take), (gst_adapter_take_buffer):
* libs/gst/base/gstadapter.h:
* tests/check/libs/adapter.c: (create_and_fill_adapter),
(GST_START_TEST), (gst_adapter_suite):
* tests/examples/Makefile.am:
Do some optimisation work in GstAdapter to avoid copies in more cases.
It could still do slightly better by merging buffers when
gst_buffer_is_span_fast is true, but is already faster.
Also, avoid traversing a single-linked list to append each incoming
buffer inside the adapter.
Add simple test app that times the adapter behaviour in different
situations, and extend the unit test to check that bytes enter and
exit the adapter in their original order.
Original commit message from CVS:
* docs/random/draft-missing-plugins.txt:
Update: use element message instead of adding a new message
type to the core; don't provide GStreamer API to initiate the
plugin download, just provide API to compose the strings needed
and let an external libgimmestuff handle the rest.
Original commit message from CVS:
* tools/gst-inspect.c: (print_element_properties_info):
Print a string instead of 'unknown type' for GValueArray properties
Original commit message from CVS:
* tests/examples/typefind/typefind.c: (type_found), (main):
Make typefind element example work again (#371894); add a
license header.
Original commit message from CVS:
* docs/random/draft-missing-plugins.txt:
Commit initial draft about how to deal with missing plugins,
needs work (API too).
Original commit message from CVS:
Patch by: Peter Kjellerstedt <pkj at axis com>
* plugins/elements/gstfdsrc.c: (gst_fd_src_create):
Another printf fix (#371493).
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
add new API and fix the build
* gst/gstbin.c: (gst_bin_recalc_state):
* gst/gstelement.c: (gst_element_message_full),
(gst_element_get_state_func), (gst_element_set_state_func):
use new API and improve logging
* gst/gstutils.c: (gst_element_state_change_return_get_name):
* gst/gstutils.h:
API: add function to get StateChangereturn names to improve logs
Original commit message from CVS:
Patch by: Mark Nauwelaerts <manauw at skynet dot be>
* gst/gstpad.c: (gst_pad_init), (pre_activate),
(gst_pad_set_blocked_async), (gst_pad_acceptcaps_default),
(gst_pad_accept_caps), (handle_pad_block), (gst_pad_push_event):
Some small cleanups. Improve debugging.
* gst/gstpad.h:
Signal all waiting threads with a broadcast instead of just one.
Fixes#369942.
Original commit message from CVS:
* plugins/elements/gstfdsrc.c: (gst_fd_src_update_fd),
(gst_fd_src_create):
Add some debugging.
Only update fd when it's different from the old.
Original commit message from CVS:
Based on patch by: Jan David Mol <j.j.d.mol at tudelft nl>
* plugins/elements/gstfilesink.c: (gst_file_sink_class_init):
* plugins/elements/gstfilesrc.c: (gst_file_src_class_init),
(gst_file_src_map_small_region), (gst_file_src_create_mmap):
Printf fixes for gsize parameters on PPC/OSX (#369366). Also,
don't cast to long long for portability reasons, but use
GLib's types instead.
Original commit message from CVS:
* plugins/elements/gstfdsrc.c: (gst_fd_src_update_fd):
Get the arguments to lseek() the right way around.
Fixes 367677.
Original commit message from CVS:
Patch by: gorshkov <gorshkov at oghma dot on dot ca>
* gst/gstinfo.h:
_declspec should be __declspec (two underscores, not one). Fixes 366572.
Original commit message from CVS:
* win32/common/gstconfig.h:
Add GST_SEGMENT_FORMAT and GST_USING_PRINTF_EXTENSION to the
hand-made win32 gstconfig.h. Fixes#366321.
Original commit message from CVS:
* gst/gstghostpad.c: (gst_proxy_pad_do_acceptcaps),
(gst_ghost_pad_new_full):
Make acceptcaps return TRUE when we don't have a target, just like
setcaps does.
Original commit message from CVS:
* gst/gststructure.c: (gst_structure_id_set_value):
If someone tries to set a non-UTF8 string field on a structure,
don't just print a warning, but also ignore the request and do
not change/add that field to the structure.
* tests/check/gst/gsttag.c: (GST_START_TEST), (gst_tag_suite):
Test for the above.
Original commit message from CVS:
* gst/gstinfo.c:
* gst/gstinfo.h:
Change name parameter of _gst_debug_register_funcptr to const
to reflect the constness of its use in the function as well
as to quiet a gcc warning.
Original commit message from CVS:
* gst/gstevent.h:
Add small comment.
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_sink_eventfunc):
Debug segment values *after* updating them as this is more
interesting.
Original commit message from CVS:
* docs/design/part-events.txt:
Update some docs.
* docs/design/part-block.txt:
* gst/gstpad.c: (gst_pad_is_blocking), (handle_pad_block),
(gst_pad_push_event):
Revert BLOCKING patch, it tries to be smart without really having a
clear idea what or how. So, now we discard all FLUSHING events again on
a blocking pad. Should fix gnonlin again.
Original commit message from CVS:
* docs/random/ensonic/distributed.txt:
add some ideas about doing distributed processing
* docs/random/ensonic/profiling.txt:
get_rusage look promising
Original commit message from CVS:
* gst/gstsegment.c: (gst_segment_set_last_stop),
(gst_segment_set_seek), (gst_segment_set_newsegment_full):
_set_last_stop() must be with a value != -1
A _TYPE_SET to -1 means seek to 0.
Calc last_stop correctly for negative rates.
Make sure we work with positive durations when updating a segment.
Original commit message from CVS:
* gst/gstbuffer.h:
Add an explicit cast to GstBuffer** to keep old code that added an
explicit cast to GstMiniObject** for gst_mini_object_replace()
compiling without warning.
Original commit message from CVS:
Patch by: Peter Kjellerstedt <pkj at axis com>
* gst/gstobject.h:
Don't define xmlNodePtr to gpointer if the core was built with
--disable-loadsave and --disable-registry, this will break
applications that want to use libxml2 but are buildling against a
core that doesn't use libxml2. Use an intermediary type GstXmlNodePtr
instead so we don't have to mess with the libxml2 namespace
(#361675).
Original commit message from CVS:
* docs/design/part-live-source.txt:
describe howto handle latency
* docs/random/ensonic/profiling.txt:
more ideas
* tools/gst-plot-timeline.py:
fix log parsing for solaris, remove unused function
Original commit message from CVS:
Patch by: Marcus Granado <mrc dot gran at gmail com>
* win32/vs8/grammar.vcproj:
Error out with a warning if glib-genmarshal.exe is not in path,
instead of creating bogus gstmarshal.[ch] files. Fixes#361720.
Original commit message from CVS:
* gst/gstsegment.c: (gst_segment_set_seek):
When seeking to stop -1, set last_stop (current position) to the
duration of the segment.
Original commit message from CVS:
* gst/gstelement.h:
Clarify _NO_PREROLL a bit more.
* gst/gstevent.c:
Fix docs.
* gst/gstpad.c: (gst_pad_link_check_hierarchy),
(gst_pad_get_caps_unlocked), (gst_pad_save_thyself),
(handle_pad_block), (gst_pad_push_event), (gst_pad_send_event):
Patch by: Yves Lefebvre <ivanohe at abacom dot com> Fix possible deadlock
due to wrong locking order. Fixes#361769.
Remove some redundant/misplaced checks in pad_block.
* libs/gst/base/gstbasesink.c: (gst_base_sink_get_position):
For negative rates, count backwards from the duration.
Original commit message from CVS:
* gst/gsterror.c: (_gst_library_errors_init):
Fix error message for GST_LIBRARY_ERROR_SETTINGS (feel free to come
up with something better).
Original commit message from CVS:
* win32/vs6/libgstreamer.dsp:
* win32/vs7/libgstreamer.vcproj:
* win32/vs8/libgstreamer.vcproj:
Don't reference glib-compat.c which is currently not used and not
disted; add gstquark.c which was recently added. Fixes#361730.
Original commit message from CVS:
* win32/common/libgstbase.def:
* win32/common/libgstcontroller.def:
* win32/common/libgstreamer.def:
Add gst_caps_merge() and a bunch of other recently-added functions.
Fixes#361732.
Original commit message from CVS:
* docs/plugins/gstreamer-plugins.args:
* docs/plugins/inspect/plugin-coreelements.xml:
* docs/plugins/inspect/plugin-coreindexers.xml:
Update element args.
* gst/gstsystemclock.c:
Small comment update.
* plugins/elements/gsttee.c: (gst_tee_class_init), (gst_tee_init),
(gst_tee_request_new_pad), (gst_tee_release_pad),
(gst_tee_buffer_alloc), (gst_tee_sink_activate_push),
(gst_tee_sink_activate_pull):
* plugins/elements/gsttee.h:
Some tee loving:
Add default property defines.
Implement release pad function.
Give properties better blubs etc.
Activate pads before adding them to a running tee.
Do simple buffer_alloc on the first requested pad.
Post error when activation fails.
Original commit message from CVS:
Patch by: Sjoerd Simons <sjoerd at luon dot net>
* plugins/elements/gstqueue.c: (gst_queue_chain):
Recheck queue filledness after signalling the overrun when we're about
to leak downstream because we released the lock when emitting the signal
and the queue could be empty again. Fixes#352345.
Original commit message from CVS:
* libs/gst/controller/gstcontroller.c: (gst_controller_new_list):
Fix refcounting here too, just like we did for _new_valist() a few
days ago (#357180) (thanks to René Stadler). Also remove all those
'Since: 0.9' from the gtk-doc blobs.
* tests/check/libs/controller.c: (controller_refcount_new_list),
(gst_controller_suite):
Unit test for the above.
Original commit message from CVS:
Patch by: Sebastien Cote <sebas642 at yahoo dot ca>
* gst/gstpad.c: (gst_pad_get_caps_unlocked),
(gst_pad_save_thyself):
Update some docs.
Write pad direction in XML output. Fixes#345496.
Original commit message from CVS:
Patch by: René Stadler <mail at renestadler dot de>
* libs/gst/controller/gstcontroller.c: (gst_controller_new_valist),
(gst_controller_new_list), (_gst_controller_dispose),
(_gst_controller_finalize), (_gst_controller_class_init):
Take ref to controlled object so that it cannot disappear.
Fixes#357432.
Original commit message from CVS:
2006-10-10 Zaheer Abbas Merali <zaheerabbas at merali dot org>
Patch by: Josep Torre Valles <josep@fluendo.com>
* gst/Makefile.am:
Cast values when making gstenumtypes.h. This pacifies Forte
so it doesn't warn about the ~0 as GST_MESSAGE_ANY not fitting
in the enumeration.
Original commit message from CVS:
* gst/gstevent.c: (gst_event_new_seek), (gst_event_parse_seek):
Rename some more @cur to @start to fix docs.
* gst/gstsegment.c: (gst_segment_set_seek):
Fix typo.
time and start must always stay in sync as defined in design doc.
* gst/gsttaglist.c: (gst_tag_list_is_empty):
Rename param to fix docs.
* tests/check/gst/gstsegment.c: (GST_START_TEST):
Check that start and time are in sync.
* tests/check/pipelines/parse-launch.c:
(gst_parse_test_element_change_state):
Activate pad before adding to the element.
Original commit message from CVS:
* gst/gsttaglist.c: (gst_tag_list_is_empty):
* gst/gsttaglist.h:
* docs/gst/gstreamer-sections.txt:
API: add gst_tag_list_is_empty() (#360467).
* tests/check/gst/gsttag.c: (GST_START_TEST):
And a test case.
Original commit message from CVS:
2006-10-09 Zaheer Abbas Merali <zaheerabbas at merali dot org>
* gst/gstmessage.h:
Revert change from earlier wrt GST_MESSAGE_TYPE_ANY having
a value that doesn't fit on enumeration.
Original commit message from CVS:
2006-10-09 Zaheer Abbas Merali <zaheerabbas at merali dot org>
* libs/gst/net/gstnetclientclock.c: (gst_net_client_clock_thread):
Remove local debugging system and use Gstreamer's instead.
Original commit message from CVS:
2006-10-09 Zaheer Abbas Merali <zaheerabbas at merali dot org>
Patch by: Josep Torre Valles <josep@fluendo.com>
* common/m4/gst-error.m4:
Disable warning of statement not reached on Forte.
* gst/gstmessage.h:
Fix warning on Forte (value doesn't fit on enumeration).
* libs/gst/base/gstbasesink.c: (gst_base_sink_chain_unlocked):
Fix warning on Forte (value doesn't fit on enumeration).
* libs/gst/net/gstnetclientclock.c: (gst_net_client_clock_thread):
DEBUG macro says it takes minimum of 2 args and so Forte
complains about the use with just 1 arg.
* plugins/elements/gstfdsink.c:
* plugins/elements/gstfdsrc.c:
* plugins/elements/gstfilesink.c:
* plugins/elements/gstfilesrc.c:
Use correct return type for the uri handler implementations.
All these fix warnings in Forte. Fixes bug #360860.
Original commit message from CVS:
* gst/gstelement.h:
gcc versions prior to gcc 3.3 apparently complain about a NULL printf
format string, so don't use G_GNUC_PRINTF for those versions.
Original commit message from CVS:
* gst/gsttaglist.c: (gst_is_tag_list):
* gst/gsttaglist.h:
Minor fixes to GST_IS_TAG_LIST and gst_is_tag_list().
* tests/check/gst/gsttag.c: (GST_START_TEST), (gst_tag_suite):
Small test for the above.
Original commit message from CVS:
* gst/gstinfo.h:
Those two function declarations do actually belong there, revert
commit from yesterday that turned them intro macros.
Original commit message from CVS:
2006-10-06 Zaheer Abbas Merali <zaheerabbas at merali dot org>
Patch by: Josep Torre Valles <josep@fluendo.com>
* gst/gst.c: (gst_init_get_option_group):
Fix empty declaration and type mismatch.
* gst/gstbin.c: (gst_bin_change_state_func):
Fix type mismatch.
* gst/gstelement.c: (gst_element_continue_state),
(gst_element_set_state_func), (gst_element_change_state),
(gst_element_change_state_func):
Fix type mismatches.
* gst/gstinfo.c: (gst_debug_compare_log_function_by_func),
(gst_debug_remove_log_function), (_gst_debug_nameof_funcptr):
Cast as appropriate.
* gst/gstobject.c: (gst_class_signal_connect):
Cast as appropriate. The function pointer parameter really
has the wrong type but would break API if we change it.
* gst/gstquery.c:
Fix redefinition of _FILE_OFFSET_BITS caused on Solaris wrt
order of including string.h.
* gst/gstutils.c: (gst_element_state_get_name):
Remove unreachable line.
* gst/gstxml.c: (gst_xml_parse_doc):
Fix type mismatch.
All these caught by Forte.
Original commit message from CVS:
2006-10-06 Zaheer Abbas Merali <zaheerabbas at merali dot org>
Patch by: Josep Torre Valles <josep@fluendo.com>
* common/m4/gst-error.m4:
Fixed bug #360151.
We need to disable warnings on Forte for empty declarations
due to gst-indent adding ;s to lines that just use macros
where the macro actually doesn't need a ; at end to end
statement.
Original commit message from CVS:
* plugins/elements/gstfilesink.c: (gst_file_sink_open_file),
(gst_file_sink_close_file), (gst_file_sink_event),
(gst_file_sink_render):
Add some FIXME for the NEWSEGMENT handling.
Original commit message from CVS:
2006-10-05 Zaheer Abbas Merali <zaheerabbas at merali dot org>
* gst/parse/grammar.y:
Remove static function gst_parse_element_lock as all it does
is return. Looks like cruft from 0.8.
Original commit message from CVS:
2006-10-05 Zaheer Abbas Merali <zaheerabbas at merali dot org>
Patch by: Josep Torre Valles <josep@fluendo.com>
* common/m4/gst-error.m4:
* configure.ac:
* libs/gst/net/Makefile.am:
Fix a compilation issue with Forte on Solaris. inet_aton is in
libresolv.
Original commit message from CVS:
* configure.ac:
* docs/gst/gstreamer-sections.txt:
* gst/gstconfig.h.in:
* gst/gstelement.h:
* gst/gstinfo.h:
Add GST_USING_PRINTF_EXTENSION to gstconfig.h so that we know
whether we can use G_GNUC_PRINTF in other header files and at
least check the printf format/arguments of debug messages and
GST_ELEMENT_ERROR messages when the printf extension is not
being used.
Replace more tabs with spaces in gstinfo.h and remove two spurious
function declarations in GST_DISABLE_DEBUG part with macros.
Original commit message from CVS:
* gst/gstbus.c: (gst_bus_class_init), (gst_bus_post):
More docs for the sync-message signal (mention that it is not
emitted by default); log message structures of messages posted on
the bus as well.
Original commit message from CVS:
* gst/gst.c: (ensure_current_registry_forking):
Use a pipe pair to receive status results from the forked child, and
ignore the result from waitpid. Fixes#355499
Original commit message from CVS:
* docs/design/part-block.txt:
Further explain the use of flushing on blocked pads.
* docs/gst/gstreamer-sections.txt:
* gst/gstpad.c: (gst_pad_is_blocking), (handle_pad_block),
(gst_pad_push_event):
* gst/gstpad.h:
Added new GstPadFlag : GST_PAD_BLOCKING.
Adds the notion of pads really blocking, which enables to properly
handle FLUSH_START/FLUSH_STOP events on blocked pads.
Fixes#358999
API: gst_pad_is_blocking()
API: GST_PAD_IS_BLOCKING() macro
API: GST_PAD_BLOCKING GstPadFlag
Original commit message from CVS:
Patch by: mrcgran <mrc.gran at gmail dot com>
* gst/gstghostpad.c: (gst_proxy_pad_do_getcaps):
Filter the proxied caps against the padtemplate if we have one.
* gst/gstquery.c: (gst_query_new_segment):
Add include for gstinfo.h so that compilation with
-DGST_DISABLE_GST_DEBUG works again. Fixes#358436.
Original commit message from CVS:
* plugins/elements/gstfilesink.c: (gst_file_sink_init),
(gst_file_sink_set_location), (gst_file_sink_open_file),
(gst_file_sink_close_file), (gst_file_sink_event),
(gst_file_sink_render):
Set file to NULL when closing filesink so that we can set a new filename
in READY. Fixes#358613.
Original commit message from CVS:
Patch by: Alessandro Decina <alessandro at nnva org>
* gst/gstevent.c: (_gst_event_copy):
Fix gst_mini_object_make_writable() and gst_event_copy() for events
with event structures by setting the parent refcount address of the
copied structure to the address of the refcount member of the newly
copied event rather than the address of the refcount member of the
original event. Fixes#358737.
* tests/check/gst/gstevent.c: (GST_START_TEST):
Unit test for the above.
Original commit message from CVS:
* tests/check/libs/controller.c: (GST_START_TEST),
(gst_controller_suite):
Add test for the previous fix; add some more tests
for correct refcounting behaviour; fix a few leaks
in test cases; call gst_controller_init() at start
of all tests.
Original commit message from CVS:
* libs/gst/controller/gstcontroller.c: (gst_controller_new_valist),
(gst_controller_set_from_list):
Don't g_return_val_if_fail() on timed values with invalid timestamps
inside a critical section without unlocking the mutex. Spotted by
René Stadler. (#357617)
Also, fix up refcounting properly: when returning an existing
controller, we should increase the reference only once and not
once per property and when trying to control a property again
we should also increase the refcount.
Original commit message from CVS:
* gst/gst.c: (init_pre), (scan_and_update_registry),
(ensure_current_registry_nonforking),
(ensure_current_registry_forking), (ensure_current_registry),
(init_post), (gst_debug_help), (gst_deinit):
* gst/gst_private.h:
* gst/gstregistry.c: (gst_registry_finalize),
(gst_registry_remove_features_for_plugin_unlocked),
(gst_registry_remove_plugin), (gst_registry_scan_path_level),
(gst_registry_scan_path),
(_priv_gst_registry_remove_cache_plugins),
(_priv_gst_registry_cleanup):
* gst/gstregistry.h:
Re-commit the registry changes, along with an extra fix:
When a cached plugin is encountered at a different file path,
update the stored path in the registry cache so that the parent
process knows where it actually is now when it re-reads the registry
cache. Fixes the thing that broke distcheck with the previous commit.
* tests/check/Makefile.am:
Clean up files named 'core' too when running make clean.
* tests/examples/manual/Makefile.am:
Set up a registry path for running these tests, and clean it properly
for distcheck.
Original commit message from CVS:
* configure.ac:
Don't pull in gmodule-2.0.pc as a dependency in our .pc files - we
want gmodule-no-export-2.0.pc instead so that we don't drag in
--export-dynamic on every project that links to GStreamer.
Also, make our export regex only match the start of symbols, rather
than any symbol that contains '_gst' somewhere.
* libs/gst/check/Makefile.am:
The libgstcheck we build does however need export-dynamic, as it
produces some symbols that don't match our _gst... style regex.
Original commit message from CVS:
* gst/gst.c: (init_pre), (scan_and_update_registry),
(ensure_current_registry_nonforking),
(ensure_current_registry_forking), (ensure_current_registry),
(init_post), (gst_debug_help), (gst_deinit):
Make init_pre and init_post take the full complement of GOptionFunc
args so they can return useful GErrors. Make the registry updating
functions do so.
Call _priv_gst_registry_remove_cache_plugins after scanning files to
ensure that the registry we're about to write out doesn't contain
stale information about old-deleted plugin files.
Make _priv_gst_registry_remove_cache_plugins return a boolean so
that deletion of plugin files is considered a registry change.
* gst/gst_private.h:
* gst/gstregistry.c: (gst_registry_finalize),
(gst_registry_remove_features_for_plugin_unlocked),
(gst_registry_remove_plugin), (gst_registry_scan_path_level),
(gst_registry_scan_path),
(_priv_gst_registry_remove_cache_plugins),
(_priv_gst_registry_cleanup):
* gst/gstregistry.h:
Rename _gst_registry_remove_cache_plugins and _gst_registry_cleanup
by adding _priv prefix, so that they won't appear in the global
symbol table. They still do atm though because of #318031. Move the
prototypes to gst_private.h
When removing a plugin, remove all features for that plugin too.
Fixes#340878.
Original commit message from CVS:
* docs/random/moving-plugins:
Make it clear that the "compiled-in descriptions" really mean
the element details.
* libs/gst/base/gstbasesink.c: (gst_base_sink_commit_state),
(gst_base_sink_wait_preroll):
Update docs.
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/base/gstbasesrc.c: (gst_base_src_wait_playing),
(gst_base_src_get_range), (gst_base_src_activate_push):
* libs/gst/base/gstbasesrc.h:
Added function to block while waiting for PLAYING, this function
is used by live sources that block on the clock.
API: gst_base_src_wait_playing()
Original commit message from CVS:
Patch by: Peter Kjellerstedt <pkj at axis com>
* Makefile.am:
gst-element-check.m4 is generated and should therefore be
copied from the build dir rather than the source dir (#357593).
'make distcheck' hasn't noticed this because we were disting
the file as well, so stop doing that.
Original commit message from CVS:
* tests/check/gst/gstcaps.c: (GST_START_TEST), (gst_caps_suite):
Add some tests for gst_caps_intersect().
* tools/gst-launch.c: (event_loop):
Print all buffering percentages we get, even the 100% one.
Original commit message from CVS:
* tools/gst-inspect.c: (print_element_properties_info),
(print_signal_info):
Fix printing of flags to match the look of enums.
Original commit message from CVS:
* gst/gsturi.c: (search_by_entry):
Don't assert/crash here if a uri handler doesn't return any
supported protocols. The list of protocols could be generated
dynamically at runtime or at plugin registration, and an error
in the underlying library shouldn't be fatal (#353301).
Original commit message from CVS:
Based on patch by: Antoine Tremblay <hexa00 at gmail dot com>
* libs/gst/base/gstbasesrc.c:
(gst_base_src_default_check_get_range), (gst_base_src_start),
(gst_base_src_activate_push), (gst_base_src_activate_pull),
(gst_base_src_change_state):
Match _start/_stop calls in the activate functions. Remove redundant
_stop call from the state change function. Fixes#356910.
Turn failure DEBUG into ERROR.
Original commit message from CVS:
* libs/gst/controller/gstcontroller.c: (gst_controller_new_valist),
(gst_controller_new_list):
Ref instances when returning them again (fixes#357180)
Original commit message from CVS:
* gst/gstghostpad.c: (gst_ghost_pad_new_full):
Also set template on the internal pad so that a getcaps from the target
pad returns the template caps.
Original commit message from CVS:
* gst/gstelement.c: (gst_element_post_message),
(gst_element_dispose):
Use _DEBUG_OBJECT some more.
* libs/gst/base/gstbasesrc.c: (gst_base_src_loop):
Avoid typechecks.
* tools/gst-launch.c: (main):
If the toplevel element is not a GstPipeline, it must be put in a
pipeline so that a bus and clock is selected.
Original commit message from CVS:
* libs/gst/base/gstbasesrc.c: (gst_base_src_default_query):
JITTER, RATE, and LATENCY query should be handled by the
default case and not by the CONVERT query code.
Original commit message from CVS:
* gst/gstformat.c: (gst_format_register):
Fix locking order (must take lock before using n_values).
* gst/gstvalue.c: (gst_value_serialize_enum),
(gst_value_deserialize_enum_iter_cmp),
(gst_value_deserialize_enum):
Fix serialisation/deserialisation of custom registered GstFormats.
* tests/check/gst/gstvalue.c: (GST_START_TEST), (gst_value_suite):
Unit test for custom format serialisation/deserialisation.
Original commit message from CVS:
* docs/pwg/building-boiler.xml:
* plugins/elements/gstcapsfilter.c:
More G_OBJECT macro fixing. Also Fix some details on the plugin-stamp
section.
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_buffer_alloc):
Check if requested caps are the same as the sinks caps IF
->have_same_caps is TRUE. If they are not, act as if have_same_caps
is FALSE.
This fixes the renegotiation issues stated in #352827.
Original commit message from CVS:
* configure.ac:
* docs/manual/advanced-autoplugging.xml:
* tests/examples/Makefile.am:
* tests/examples/manual/.cvsignore:
* tests/examples/manual/Makefile.am:
* tests/examples/manual/extract.pl:
Extract the manual examples again like we used to do.
Fix one of them.
Original commit message from CVS:
* tools/gst-launch.c: (sigint_handler_sighandler), (check_intr),
(event_loop), (main):
Added some comments here and there.
Post an application message when an interrupt is caught instead of doing
an uncontrolled state change.
Clean up the event loop.
Handle buffering messages, pause/resume the pipeline.
Make shutdown because of an interrupt more reliable.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_commit_state),
(gst_base_sink_wait_preroll), (gst_base_sink_do_sync),
(gst_base_sink_preroll_object):
Make sure that our internal state is correct when we commit our state
asynchronously. This solves a race where a state change to PLAYING
could cause the sink to remain blocked in preroll in some situations.
Original commit message from CVS:
* tools/gst-inspect.c: (print_element_properties_info),
(print_signal_info):
List flags as hex so it's easier to deal with.
Original commit message from CVS:
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/base/gstbasesink.c: (gst_base_sink_wait_preroll),
(gst_base_sink_do_sync):
* libs/gst/base/gstbasesink.h:
Expose logic to wait for preroll so that subclasses such as audiosink
can also use this method.
API: gst_base_sink_wait_preroll()
Original commit message from CVS:
* gst/gstobject.c: (gst_object_set_parent):
* gst/gstpipeline.c: (do_pipeline_seek):
Small cleanups in docs and code.
* gst/gstsegment.c: (gst_segment_clip):
* tests/check/gst/gstsegment.c: (GST_START_TEST):
if stop == start and start is in the segment, no clipping should be
done. Also add a test for this.
Original commit message from CVS:
* gst/gstbin.c:
Update documentation.
* gst/gstelement.c: (gst_element_class_init),
(gst_element_release_request_pad), (gst_element_set_clock),
(gst_element_get_index), (gst_element_add_pad),
(gst_element_remove_pad), (gst_element_get_random_pad),
(gst_element_send_event), (gst_element_get_query_types),
(gst_element_query), (gst_element_post_message),
(gst_element_message_full), (gst_element_continue_state),
(gst_element_lost_state), (gst_element_save_thyself),
(gst_element_restore_thyself):
Documentation updates.
Rename last bit of the new-pad -> pad-added signal rename.
Fix the case where an element query would only work if the source
pad was linked.
Avoid some useless type checking in message handling.
* gst/gstevent.c:
* gst/gstevent.h:
* gst/gstutils.c:
Documentation updates.
Original commit message from CVS:
* gst/gstregistryxml.c: (gst_registry_xml_save_feature):
Print a warning rather than g_assert() if a plugin feature
is a URI handler but returns no protocols (#353976).
Original commit message from CVS:
* gst/gstinfo.c: (_gst_debug_nameof_funcptr):
Fix locking order, handle NULL function values properly.
* gst/gstinfo.h:
Fix docs.
* gst/gstpad.c: (gst_pad_buffer_alloc_unchecked):
Initialised variable before using it and fix debug statement to
print the address of the function rather than the address of the
variable on the stack holding the address of the function.
Original commit message from CVS:
* gst/gstghostpad.c: (gst_proxy_pad_do_event),
(gst_proxy_pad_do_bufferalloc), (gst_proxy_pad_do_chain),
(gst_proxy_pad_do_getrange), (gst_proxy_pad_do_checkgetrange),
(gst_proxy_pad_set_target_unlocked), (gst_ghost_pad_parent_set),
(gst_ghost_pad_parent_unset),
(gst_ghost_pad_internal_do_activate_push),
(gst_ghost_pad_internal_do_activate_pull),
(gst_ghost_pad_do_activate_push), (gst_ghost_pad_do_activate_pull),
(gst_ghost_pad_do_link), (gst_ghost_pad_do_unlink),
(gst_ghost_pad_init), (gst_ghost_pad_dispose),
(gst_ghost_pad_new_full), (gst_ghost_pad_new_no_target),
(gst_ghost_pad_new), (gst_ghost_pad_new_from_template),
(gst_ghost_pad_new_no_target_from_template),
(gst_ghost_pad_get_target), (gst_ghost_pad_set_target):
More cleanups.
Avoid needless typechecking in macros.
Since the internal pad is always present and never changes, there is
no need to locking or ref when retrieving it.
Improve debugging a bit.
Handle link errors when setting the target. Fixes#341029.
Original commit message from CVS:
* docs/libs/gstreamer-libs-sections.txt:
* docs/plugins/gstreamer-plugins-sections.txt:
Fix docs some more.
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_remove_pad),
(gst_collect_pads_event):
* libs/gst/base/gstcollectpads.h:
Documentation updates.
Free queued buffer when removing a pad.
Original commit message from CVS:
* gst/gstutils.c: (gst_element_link_pads),
(gst_element_link_pads_filtered):
Ensure that we set a capsfilter to NULL if we failed to link it
when doing filtered linking, to avoid criticals.
No need to check for unreffing srcpad, which is explicly NULLed
above (a trivial code cleanup).
Original commit message from CVS:
* docs/design/part-gstghostpad.txt:
Update ascii art in documentation.
* gst/gstghostpad.c: (gst_proxy_pad_do_internal_link),
(gst_proxy_pad_set_target_unlocked), (gst_proxy_pad_init),
(gst_ghost_pad_parent_set), (gst_ghost_pad_parent_unset),
(gst_ghost_pad_internal_do_activate_push),
(gst_ghost_pad_internal_do_activate_pull),
(gst_ghost_pad_do_activate_push), (gst_ghost_pad_do_activate_pull),
(gst_ghost_pad_do_link), (gst_ghost_pad_do_unlink),
(gst_ghost_pad_dispose), (gst_ghost_pad_new_full),
(gst_ghost_pad_set_target):
Small cleanups and leak fixes.
Remove some checks now that the internal pad is never NULL.
Fix the case where linking pads without a target would create nasty
criticals. Fixes#341029.
Don't assign a GstPadLinkReturn to a gboolean and mess up the return
value of _set_target().
* tests/check/gst/gstghostpad.c: (GST_START_TEST),
(gst_ghost_pad_suite):
Some more tests for creating and linking untargeted ghostpads.
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
* gst/gstghostpad.c: (gst_proxy_pad_do_getcaps),
(gst_proxy_pad_do_setcaps), (gst_proxy_pad_set_target_unlocked),
(gst_proxy_pad_dispose), (gst_ghost_pad_new_full),
(gst_ghost_pad_new_no_target), (gst_ghost_pad_new),
(gst_ghost_pad_new_from_template),
(gst_ghost_pad_new_no_target_from_template):
* gst/gstghostpad.h:
Refactored *_new() functions.
Templates are now used as a g_object_new() parameter.
Use template in _do_getcaps() if we don't have a target.
Small documentation cleanups.
Added two new constructors:
gst_ghost_pad_new_from_template()
gst_ghost_pad_new_no_target_from_template()
* tests/check/gst/gstghostpad.c: (GST_START_TEST),
(gst_ghost_pad_suite):
Added tests for new ghostpad instanciation functions.
API additions: gst_ghost_pad_new_from_template,
gst_ghost_pad_new_no_target_from_template
Original commit message from CVS:
* gst/gstxml.c:
Improve and detypofy docs.
* tests/check/Makefile.am:
* tests/check/gst/.cvsignore:
* tests/check/gst/gstxml.c: (GST_START_TEST), (gst_xml_suite):
Add a basic test suite for GstXML.
Original commit message from CVS:
* gst/gstelement.c: (activate_pads), (clear_caps),
(iterator_activate_fold_with_resync), (gst_element_pads_activate):
Clear the pad caps when the element shut down all of the pads and
is not streaming data that could modify the caps.
Fixes#352958.
Original commit message from CVS:
* plugins/elements/gstidentity.c: (gst_identity_transform_ip):
Revert previous change; I misunderstood single-segment mode.
Original commit message from CVS:
* plugins/elements/gstidentity.c: (gst_identity_transform_ip):
Unset DISCONT on buffers when using single-segment mode.
Original commit message from CVS:
* gst/gstcaps.c: (gst_caps_merge_structure):
* gst/gstcaps.h:
Fix docs and indentation again.
* tests/check/gst/gstquery.c: (GST_START_TEST):
Fix leak in tests and add some more tests.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_get_sync_times):
Inform GstSegment of the last stop position in order for the current
segment to have a proper duration if it doesn't have a specific stop
position from which a duration could be calculated.
This bug was noticeable when a non-flushing, non-update new segment was
followed by another segment (all buffers from the new segment were being
dropped).
Original commit message from CVS:
* libs/gst/base/gstbasesrc.c: (gst_base_src_perform_seek):
Small comment update.
* plugins/elements/gstidentity.c: (gst_identity_class_init),
(gst_identity_transform_ip):
Drop-probability is broken, mention this in the code with a
FIXME and also in the property description.
Make silent also be silent about the drop messages.
Original commit message from CVS:
* docs/manual/appendix-win32.xml:
Remove mention of popt, we don't depend on that any
longer (#353136). Add some comments pointing out that
this section is slightly outdated.
Original commit message from CVS:
Patch by: Torsten Schoenfeld <kaffeetisch at gmx dot de>
* gst/gstquery.c: (gst_query_new_segment):
* tests/check/gst/gstquery.c: (GST_START_TEST):
Initialize variables when creating a new segment query.
Fixes#353121.
Original commit message from CVS:
Patch by: Torsten Schoenfeld <kaffeetisch at gmx dot de>
* gst/gstelement.c: (gst_element_get_bus):
* tests/check/gst/gstelement.c: (GST_START_TEST):
Check for NULL before _reffing the bus. Fixes#353122.
Original commit message from CVS:
* docs/manual/basics-bus.xml:
Docs update: fix wrong callback return value explanation; add
some lines about the implicit relationship between main loop
and main context; remove duplicate main loop variable declaration.
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_start_task), (gst_pad_pause_task),
(gst_pad_stop_task):
Improve debugging for task functions.
* gst/gsttask.c: (gst_task_func), (gst_task_set_lock),
(gst_task_start), (gst_task_pause), (gst_task_join):
Make sure that the task function started and finished after a
join().
Don't try to push the task function on the threadpool multiple
times.
Improve the g_warning message with some useful suggestions
about how to fix the problem.
Original commit message from CVS:
* gst/gstxml.c: (gst_xml_dispose), (gst_xml_parse_file),
(gst_xml_parse_memory), (gst_xml_get_element):
Chain up to parent class in dispose function and also
unref the elements in the toplevel_elements GList.
Don't leak XmlDocPtr in _parse_file() and _parse_memory().
Always return a reference in gst_xml_get_element() rather
than only sometimes.
* tools/gst-launch.c: (xmllaunch_parse_cmdline):
Don't leak GstXml object.
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
* gst/gstcaps.c: (gst_structure_is_equal_foreach),
(gst_caps_merge):
* gst/gstcaps.h:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_transform_caps):
API: Add gst_caps_merge() and use it in basetransform, fixes#345444
in a better way
Original commit message from CVS:
* gst/gstxml.c: (gst_xml_class_init), (gst_xml_dispose):
Implement GObject::dispose virtual method in GstXML so we can free the
top_elements GList.
Original commit message from CVS:
* gst/gstbuffer.c: (gst_buffer_make_metadata_writable),
(gst_buffer_create_sub):
Copy duration/offset_end/caps when creating a subbuffer of the
complete parent.
Make the subbuffer read-only when we make the metadata writable for
now. Fixes#351768.
* tests/check/gst/gstbuffer.c: (GST_START_TEST):
Added check for metadata copy when creating subbuffers.
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_buffer_alloc):
Only call downstream buffer_alloc if transform element is passthrough
or always_in_place. Closes#350449.
Original commit message from CVS:
* gst/gst.c:
* gst/gstpad.c: (gst_pad_set_active):
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_transform_caps):
Simplify caps to get rid of duplicates, fixes#345444
Original commit message from CVS:
* gst/gstvalue.c: (gst_value_compare_list),
(gst_value_compare_fraction_range),
(gst_value_intersect_fraction_fraction_range),
(gst_value_intersect_fraction_range_fraction_range),
(gst_value_subtract_fraction_fraction_range),
(gst_value_subtract_fraction_range_fraction_range),
(gst_value_get_compare_func), (gst_value_compare),
(gst_value_compare_with_func):
* gst/gstvalue.h:
Saves the expensive lookup of the compare function in many cases
(#345444)
Original commit message from CVS:
* docs/random/ensonic/logging.txt:
update ideas
* gst/gstinfo.c: (gst_debug_log_default):
reorder fields, save some columns, add optinal color codes for log-
levels
Original commit message from CVS:
* docs/libs/gstreamer-libs-docs.sgml:
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/check/gstbufferstraw.c:
Make gstcheck stuff show up in docs (still needs to
be documented properly though).
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
* gst/Makefile.am:
* gst/gst.c: (init_post):
* gst/gst_private.h:
* gst/gstquark.c: (_priv_gst_quarks_initialize):
* gst/gstquark.h:
* gst/gstquery.c: (gst_query_new_position),
(gst_query_set_position), (gst_query_parse_position),
(gst_query_new_duration), (gst_query_set_duration),
(gst_query_parse_duration), (gst_query_new_convert),
(gst_query_set_convert), (gst_query_parse_convert),
(gst_query_new_segment), (gst_query_set_segment),
(gst_query_parse_segment), (gst_query_new_seeking),
(gst_query_set_seeking), (gst_query_parse_seeking):
Add internal helpers for pre-registering quarks from static strings
and using the quark values directly instead of looking them up when
creating and parsing queries. Can be used for event construction too.
Closes#350432.
Original commit message from CVS:
* gst/gstutils.c: (gst_util_set_value_from_string):
Fix memleak (#351502).
* tests/check/gst/gstutils.c: (GST_START_TEST), (gst_utils_suite):
Add unit test for most of gst_util_set_value_from_string()
(not that one would want to encourage use of this function).
Original commit message from CVS:
* libs/gst/check/gstcheck.h:
Use const gchar * variables in fail_unless_equals_string
macro to avoid compiler warnings (and don't use tabs for
indenting).
Original commit message from CVS:
* tools/gst-launch.c: (print_tag):
More space on the left for the tag names, to cater
for the 'extended comment' tag (not touching the
string for the first line since it's translated).
Original commit message from CVS:
* libs/gst/check/gstcheck.h:
Fix ASSERT_CRITICAL and ASSERT_WARNING macros to actually
print something when they fail.
Original commit message from CVS:
* gst/gstinfo.c: (gst_debug_print_object):
Make GST_PTR_FORMAT print messages as well.
* tests/check/gst/gstinfo.c: (printf_extension_log_func),
(GST_START_TEST), (gst_info_suite):
More tests.
Original commit message from CVS:
* gst/gstelementfactory.c: (gst_element_register):
If the GstElementClass doesn't have a GstElementDetails with all fields
filled up correctly (longname, description AND author), then error out
nicely instead of crashing.
Original commit message from CVS:
* gst/gststructure.c:
Fix typo in docs and re-wrap docs blurb to not exceed 80 chars/line.
* gst/gstvalue.h:
Expand on the difference between arrays and lists as we use them.
Original commit message from CVS:
* libs/gst/base/gstbasesrc.c: (gst_base_src_change_state):
If the parent state change function failed, don't assume we can safely
stop the source, this will be done when the pads are deactivated.
Original commit message from CVS:
* gst/gstbuffer.c:
* gst/gsttask.c: (gst_task_join):
Small doc updates.
* gst/gstpad.c: (gst_pad_activate_pull), (gst_pad_activate_push),
(gst_pad_stop_task):
When pad (de)activation failed for some reason, restore the old
activation mode and set the pad to flushing instead of assuming the
pad is deactivated.
If the _task_join() failed, reinstall the task on the pad so that it can
be stopped later and return an error.
Original commit message from CVS:
2006-08-11 Andy Wingo <wingo@pobox.com>
* configure.ac:
* libs/gst/dataprotocol/dataprotocol.c: (gst_dp_packetizer_new):
* tests/check/libs/gdp.c: (gst_dp_suite): GST_DISABLE_DEPRECATED
is only for users of API that don't want to see deprecated
functions in the headers; people that want to compile out
deprecated code should pass -DGST_REMOVE_DEPRECATED into the
CFLAGS. Fixes the build of multifdsink, or will soon..
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
Add GstClockClass vmethod docs.
* gst/gstcaps.h:
Mark #endif with comment for associated #if
* gst/gstclock.c: (gst_clock_id_wait):
* gst/gstclock.h:
Add vmethod wait_jitter to avoid an unneeded _get_time() for
most clock implementations.
Document vmethods.
Flesh out docs about resolution methods.
API: GstClockClass::wait_jitter
* gst/gstsystemclock.c: (gst_system_clock_class_init),
(gst_system_clock_async_thread),
(gst_system_clock_id_wait_jitter_unlocked),
(gst_system_clock_id_wait_jitter):
Use base class wait_jitter variant for improved performance
due to less clock polling.
Original commit message from CVS:
* gst/gst.c: (gst_init_check), (init_post):
Set gst as being initialized before scanning/updating the registry,
since there might be some plugins that call gst_init() and we don't
want to loop back in.
Closes#350879
Original commit message from CVS:
* docs/design/part-qos.txt:
Bring docs in line with the code. Mostly the sign of the jitter was
wrong in the docs.
* gst/gstclock.c:
Fix the docs for the jitter.
* gst/gstevent.c: (gst_event_new_custom), (gst_event_new_tag),
(gst_event_parse_tag), (gst_event_new_buffer_size),
(gst_event_parse_buffer_size), (gst_event_parse_qos),
(gst_event_new_seek), (gst_event_parse_seek),
(gst_event_new_navigation):
Make sure the GstStructure has no parent when creating custom
events.
Add some more argument checking so that we avoid 0.0 rates.
Flesh out the docs for the QoS event some more.
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
* gst/gst.c: (gst_init_get_option_group), (gst_init_check),
(ensure_current_registry_forking), (ensure_current_registry),
(parse_one_option), (parse_goption_arg), (gst_deinit),
(gst_registry_fork_is_enabled), (gst_registry_fork_set_enabled):
* gst/gst.h:
Doc updates.
Added API and command line option to disable registry forking in
addition to the environment variable.
Constify some static arrays.
Added some more debug.
Don't deinit twice.
API: gst_registry_fork_is_enabled()
API: gst_registry_fork_set_enabled()
API: --gst-disable-registry-fork command line option
Original commit message from CVS:
* libs/gst/controller/gstcontroller.h:
fix ABI size-correction
* tests/check/libs/gdp.c: (gst_dp_suite):
make tests that use deprecated API conditional
Original commit message from CVS:
* configure.ac:
* docs/gst/gstreamer-sections.txt:
* gst/gstconfig.h.in:
* gst/gstinfo.c: (_gst_debug_init), (gst_debug_print_segment),
(_gst_info_printf_extension_ptr),
(_gst_info_printf_extension_segment):
API: add GST_SEGMENT_FORMAT, which is a printf extension we
register that lets us easily dump GstSegments into debug
logs (#350419).
* tests/check/gst/gstinfo.c: (segment_printf_extension_log_func),
(info_segment_format_printf_extension), (gst_info_suite):
Add simple unit test that logs a bunch of different segments (not
valgrinded at the moment because of leaks in gst_debug_add_log_function).
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_buffer_alloc):
Even if we can't figure out the proper format to request downstream,
call buffer_alloc() downstream with the input parameters without setting
the caps on the srcpad. This will force negotiation in the chain
function.
Closes#350449
Original commit message from CVS:
* gst/gstghostpad.c: (gst_ghost_pad_do_unlink):
Unlinking from a pad without a target is now a perfectly valid case
which should NOT raise an assertion.
This case would happen if a linked ghostpad its target set to NULL after
it was previously linked.
Original commit message from CVS:
* tests/check/libs/gdp.c: (gst_dp_suite):
Use the architecture information from config.h and not gcc macros
in order to properly disable a test that fails on PPC64.
Original commit message from CVS:
* libs/gst/dataprotocol/dataprotocol.c:
(gst_dp_header_from_buffer_any), (gst_dp_packet_from_caps_any),
(gst_dp_crc), (gst_dp_header_payload_length),
(gst_dp_header_payload_type), (gst_dp_packet_from_event),
(gst_dp_packet_from_event_1_0), (gst_dp_buffer_from_header),
(gst_dp_caps_from_packet), (gst_dp_event_from_packet_0_2),
(gst_dp_event_from_packet), (gst_dp_validate_header),
(gst_dp_validate_payload):
Make debug category static
Constify the crc table.
Do some more arg checking in public functions.
Fix some docs and do some small cleanups.
* tests/check/libs/gdp.c: (GST_START_TEST), (gst_dp_suite):
Add some more checks to see if GDP deals with bogus input.
Original commit message from CVS:
* gst/gstelementfactory.c: (gst_element_factory_create):
Remove unnecessary ref/unref pair
* gst/parse/grammar.y:
Make sure to free the parse buffer on all code paths.
Move a g_free up to the error handler where it's easier to see.
* tests/check/gst/gstevent.c: (test_event):
Extending timeout for downstream travelling events to 10 seconds to
hopefully avoid intermittent failure on the buildbots.
* tests/check/pipelines/parse-launch.c: (run_delayed_test):
Don't manually set the state of the src element - it will happen as a
natural consequence of the pipeline changing state, and that way it
will do it in the right order too.
Original commit message from CVS:
* gst/gstelementfactory.c: (gst_element_factory_create):
Remove unnecessary ref/unref pair
* gst/parse/grammar.y:
Make sure to free the parse buffer on all code paths.
Move a g_free up to the error handler where it's easier to see.
* tests/check/gst/gstevent.c: (test_event):
Extending timeout for downstream travelling events to 10 seconds to
hopefully avoid intermittent failure on the buildbots.
* tests/check/pipelines/parse-launch.c: (run_delayed_test):
Don't manually set the state of the src element - it will happen as a
natural consequence of the pipeline changing state, and that way it
will do it in the right order too.
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_class_init), (gst_pad_dispose),
(gst_pad_get_property), (gst_pad_activate_pull),
(gst_pad_activate_push), (gst_pad_set_blocked_async),
(gst_pad_set_activate_function),
(gst_pad_set_activatepull_function),
(gst_pad_set_activatepush_function), (gst_pad_set_chain_function),
(gst_pad_set_getrange_function),
(gst_pad_set_checkgetrange_function), (gst_pad_set_event_function),
(gst_pad_set_query_function), (gst_pad_set_query_type_function),
(gst_pad_set_internal_link_function), (gst_pad_set_link_function),
(gst_pad_set_unlink_function), (gst_pad_set_getcaps_function),
(gst_pad_set_acceptcaps_function),
(gst_pad_set_fixatecaps_function), (gst_pad_set_setcaps_function),
(gst_pad_set_bufferalloc_function), (gst_pad_link_check_hierarchy),
(gst_pad_get_caps_unlocked), (gst_pad_get_caps),
(gst_pad_peer_get_caps), (gst_pad_accept_caps),
(gst_pad_peer_accept_caps), (gst_pad_set_caps),
(gst_pad_configure_sink), (gst_pad_configure_src),
(gst_pad_get_allowed_caps), (gst_pad_get_negotiated_caps),
(gst_pad_buffer_alloc_unchecked), (gst_pad_alloc_buffer_full),
(gst_pad_query), (gst_pad_load_and_link), (handle_pad_block),
(gst_pad_chain_unchecked), (gst_pad_push), (gst_pad_get_range),
(gst_pad_send_event):
Use _DEBUG_OBJECT when it makes sense.
Protect GST_PAD_CAPS with the OBJECT_LOCK.
Small cleanups and code reflows.
Avoid caps refcounting in _accept_caps.
Refactor alloc_buffer so that the code performed on the peer is in a
separate function. Also if the pad does not implement a buffer alloc
function, we should still check if the pad is flushing before falling
back to the default allocator.
Original commit message from CVS:
* tests/check/pipelines/parse-launch.c: (GST_START_TEST):
Make all uses of identity and fakesink have silent=true to avoid
serialising every passing data structure, which is breaking tests
on FC4 for some unknown reason.
Original commit message from CVS:
* gst/parse/Makefile.am:
* gst/parse/grammar.y:
* gst/parse/parse.l:
Reverted previous patch as it required to bump the flex dependency to
2.5.31, where fc4/5 seem to ship only the ancient 2.5.4a :(
Original commit message from CVS:
Patch by: Marc-Andre Lureau <marcandre.lureau@gmail.com>
* gst/parse/Makefile.am:
* gst/parse/grammar.y:
* gst/parse/parse.l:
push & pop the state of the lexer for reentrant use case
Fixes#349180
Original commit message from CVS:
* libs/gst/base/gstcollectpads.c:
(gst_collect_pads_set_flushing_unlocked), (gst_collect_pads_pop),
(gst_collect_pads_clear), (gst_collect_pads_flush),
(gst_collect_pads_event), (gst_collect_pads_chain):
When flushing a pad, also clear the queued buffer so that we don't
accidentally use it when we shouldn't.
Fix leaks by inreffing incomming buffer.
Flush out queued buffers in case of errors.
Fixes#347452.
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c: (gst_base_transform_setcaps):
Extra debug output
* tests/check/libs/gdp.c: (gst_dp_suite):
Take a whack at fixing the ppc compile using a different define to
disable the broken test.
* tests/check/pipelines/parse-launch.c: (GST_START_TEST):
Remove excess g_print()
Original commit message from CVS:
* tests/check/pipelines/parse-launch.c: (expected_fail_pipe):
Oops, meant to uncomment this line too to dampen the noise a bit.
Original commit message from CVS:
* gst/parse/grammar.y:
* gst/parse/parse.l:
* tests/check/pipelines/parse-launch.c: (expected_fail_pipe),
(GST_START_TEST), (parse_suite):
Fix some of the leaks exposed by extending the parse-launch testsuite,
and move the 3 I can't figure out into a separate test that won't run
the pipelines unless the appropriate line is uncommented.
Original commit message from CVS:
* plugins/elements/gstfilesrc.c: (gst_file_src_create_read):
Requesting 0 bytes before the end of the file should result in
FLOW_OK and an empty buffer, not FLOW_UNEXPECTED. Thank you
unit test.
Original commit message from CVS:
* gst/gstcaps.c: (gst_static_caps_get), (gst_caps_get_structure):
Fix useless assert, a uint is always positive.
* gst/gststructure.c: (gst_structure_nth_field_name),
(gst_structure_foreach), (gst_structure_map_in_place):
Check input arguments for public functions to avoid obvious crashes.
* plugins/elements/gstfakesink.c: (gst_fake_sink_render):
* plugins/elements/gstfakesink.h:
Do less useless typechecking.
Original commit message from CVS:
* plugins/elements/gstfilesrc.c: (gst_file_src_class_init):
Do not use mmap() by default since there are a number of error
conditions that we would like to handle in a non-fatal way that
will result in a SIGBUS if we use mmap(). Examples: external
devices (USB harddrive, portable music player) being unplugged
while in use; file on mounted CD/DVD that can't be read because
the medium is partly damaged. Fixes#348455 and #348475.
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
Oops. Commit the docs additions too for new API.
Also, remove the mention of the non-existent GST_QUERY_TYPE_RATE_DEN
Original commit message from CVS:
* gst/gststructure.c: (gst_structure_id_set),
(gst_structure_id_set_valist):
* gst/gststructure.h:
Add API for setting values into structures without performing
a quark lookup, if the appropriate quark is already known.
API: gst_structure_id_set
API: gst_structure_id_set_valist
* gst/parse/grammar.y:
* gst/parse/parse.l:
Remove some dead code shown by the coverage information.
Don't throw a critical g_warning when encountering a syntax error,
just warn and let the normal error path handle it.
* plugins/elements/gstelements.c:
Bump the rank of filesink up to PRIMARY so that it is preferred over
gnomevfssink for file:// sink uri's
* tests/check/pipelines/parse-launch.c: (expected_fail_pipe),
(GST_START_TEST), (run_delayed_test),
(gst_parse_test_element_base_init),
(gst_parse_test_element_class_init), (gst_parse_test_element_init),
(gst_parse_test_element_change_state),
(gst_register_parse_element), (parse_suite):
Beef up the tests for parse syntax to check that more error cases
fail as they are supposed to. Increases the test coverage a bit.
Original commit message from CVS:
* docs/manual/basics-elements.xml:
Fix gst_element_link() example.
* gst/gstutils.c:
Mention in API docs that one should usually gst_bin_add()
elements to a bin or pipeline before doing the linking.
Original commit message from CVS:
* gst/gstbuffer.c: (gst_buffer_get_type), (gst_buffer_new),
(gst_subbuffer_get_type), (gst_buffer_create_sub):
Avoid function call for known types by keeping the buffer and
subbuffer GType global.
* plugins/elements/gstfilesrc.c: (gst_file_src_create_read):
Random silly optimisations in read() path.
Original commit message from CVS:
* tools/gst-launch.c: (main):
If the top-level of the parse is a normal bin, it doesn't do the
right logic to run as a top-level element, so place it inside a
pipeline.
Original commit message from CVS:
* plugins/elements/gstfilesrc.c: (gst_file_src_set_property):
Remove superfluous g_object_notify() calls, GObject does
that for us automatically.
Original commit message from CVS:
* gst/gstminiobject.c:
update docs
* plugins/elements/gstfdsrc.c: (gst_fd_src_set_property),
(gst_fd_src_create):
log recurring events at LOG level
add more debug for when the fd gets set
Original commit message from CVS:
* gst/gstparse.c: (gst_parse_launch):
Also remove reentrance checks if flex is MT save (#348179)
Fix my empty ChangeLog entry below
Original commit message from CVS:
2006-07-21 Andy Wingo <wingo@pobox.com>
* libs/gst/check/Makefile.am
(libgstcheck_@GST_MAJORMINOR@include_HEADERS)
(libgstcheck_@GST_MAJORMINOR@_la_SOURCES):
* libs/gst/check/gstbufferstraw.h:
* libs/gst/check/gstbufferstraw.c: Add some new hype testing
functions, thus proving I am still a GStreamer haxor. OK I wrote
them a long time ago, but anyways.
Original commit message from CVS:
* tests/check/libs/gdp.c: (gst_dp_suite):
the test_buffer test fails at line 140 on ppc64 at the following
check:
fail_unless (GST_BUFFER_FLAG_IS_SET (newbuffer, GST_BUFFER_FLAG_IN_CAPS),
"GST_BUFFER_IN_CAPS flag should have been copied !");
See bug #348114 for more details.
Original commit message from CVS:
* gst/gstregistry.h:
* gst/gstregistryxml.c: (load_feature),
(gst_registry_xml_read_cache), (gst_registry_xml_save_feature):
* win32/common/config.h:
make --disable-index work (#342564)
Original commit message from CVS:
Patch by: Peter Kjellerstedt <pkj at axis dot com>
* gst/Makefile.am:
* gst/gsttrace.h:
The attached patch adds two missing defines to gsttrace.h when tracing
is disabled. It also corrects one existing define.
Fixes#347756.
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
* gst/gst.c: (gst_segtrap_is_enabled), (gst_segtrap_set_enabled):
* gst/gst.h:
* gst/gstplugin.c: (_gst_plugin_fault_handler_restore):
Add two functions to check and change the SIGSEGV behaviour
when loading plugins.
Don't mess with the SIGSEGV handler when we were told not to.
Fixes#347794.
API: gst_segtrap_is_enabled
API: gst_segtrap_set_enabled
Original commit message from CVS:
* libs/gst/base/gstbasesrc.c: (gst_base_src_update_length):
* tests/check/elements/filesrc.c: (GST_START_TEST):
Revert fix for regression in #347408 after release.
Original commit message from CVS:
Patch by: Antoine Tremblay <hexa00 at gmail com>
* gst/gstutils.c: (gst_element_unlink):
Free iterator when done (#347311).
* tests/check/gst/gstutils.c: (GST_START_TEST), (gst_utils_suite):
And add a test case for this.
Original commit message from CVS:
* libs/gst/dataprotocol/dataprotocol.c:
(gst_dp_event_from_packet_1_0):
Fixes#347337: failure to deserialize event packets with
empty payload (only event type)
Original commit message from CVS:
* gst/gstghostpad.c: (gst_proxy_pad_set_target_unlocked):
GhostPad no longer implicitely use the padtemplates of the targets.
Fixes#347384
Original commit message from CVS:
* gst/gstvalue.c: (gst_value_compare_list),
(gst_value_compare_array), (_gst_value_initialize):
* tests/check/gst/gstvalue.c: (GST_START_TEST):
Make GstValueArray comparison be order dependent as designed.
Add checks for value lists and value array comparisons.
Fixes#347221
Original commit message from CVS:
* gst/gstbin.c: (activate_pads),
(iterator_activate_fold_with_resync), (gst_bin_src_pads_activate),
(gst_bin_change_state_func):
(de)activate src pads before calling state_change on the childs.
This is to avoid the case where a src ghostpad is blocked (holding the
stream lock), which would block the deactivation of the ghostpad's
target pad.
* gst/gstghostpad.c: (gst_proxy_pad_do_query_type),
(gst_proxy_pad_do_event), (gst_proxy_pad_do_query),
(gst_proxy_pad_do_internal_link), (gst_proxy_pad_do_bufferalloc),
(gst_proxy_pad_do_chain), (gst_proxy_pad_do_getrange),
(gst_proxy_pad_do_checkgetrange), (gst_proxy_pad_do_getcaps),
(gst_proxy_pad_do_acceptcaps), (gst_proxy_pad_do_fixatecaps),
(gst_proxy_pad_do_setcaps), (gst_proxy_pad_set_target_unlocked),
(gst_proxy_pad_set_target), (gst_proxy_pad_get_internal),
(gst_proxy_pad_dispose), (gst_proxy_pad_init),
(gst_ghost_pad_parent_set), (gst_ghost_pad_parent_unset),
(gst_ghost_pad_class_init),
(gst_ghost_pad_internal_do_activate_push),
(gst_ghost_pad_internal_do_activate_pull),
(gst_ghost_pad_do_activate_push), (gst_ghost_pad_do_activate_pull),
(gst_ghost_pad_do_link), (gst_ghost_pad_do_unlink),
(gst_ghost_pad_dispose), (gst_ghost_pad_new_no_target),
(gst_ghost_pad_new), (gst_ghost_pad_set_target):
GhostPads now create their internal GstProxyPad at creation (and not
when they're linked, as it was being done previously).
The internal and target pads are linked straight away.
The data will also travel through the other pad in order to make
pad blocking and probes non-hackish (the probe/block now really happens
on the GhostPad and not on the target).
* gst/gstpad.c: (gst_pad_set_blocked_async),
(gst_pad_link_prepare), (gst_pad_push_event):
Remove previous ghostpad cruft.
* gst/gstutils.c: (gst_pad_add_data_probe),
(gst_pad_add_event_probe), (gst_pad_add_buffer_probe),
(gst_pad_remove_data_probe), (gst_pad_remove_event_probe),
(gst_pad_remove_buffer_probe):
Remove previous ghost pad cruft.
Added more detailed debug statements.
* tests/check/gst/gstghostpad.c: (GST_START_TEST):
Fix the testsuite for refcounting changes.
The comments about who has references were correct, but the refcount
being checked wasn't the same (!?!).
Original commit message from CVS:
* gst/Makefile.am:
* gst/gstconfig.h.in:
* win32/common/config.h:
Fix build when disabling tracing (fixes#344016). Also start to document
the defines that disable the sub-systems.
Original commit message from CVS:
* gst/gstelement.c: (activate_pads),
(iterator_activate_fold_with_resync), (gst_element_pads_activate):
Better pad activation code: Reset the collect value too on resync.
Add some comments.
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_init), (gst_pad_activate_pull),
(gst_pad_activate_push):
Use some more macros where it makes sense.
Allow pad mode switching instead of asserting. When a pad
is activated in one mode and we activate it in another,
deactivate it first before activating it in a different mode.
Fixes#329198.
Original commit message from CVS:
2006-07-08 Andy Wingo <wingo@pobox.com>
* tools/gst-launch.c (main): Handle err == NULL.
* gst/gst.c (init_post, ensure_current_registry)
(ensure_current_registry_forking)
(ensure_current_registry_nonforking): Reduce #ifdef ratnest by
factoring out the registry scanning into separate functions. Don't
fork for the rescan is GST_REGISTRY_FORK=no; useful in debugging.
Better environment var name/interface suggestions accepted.
Original commit message from CVS:
* gst/gstobject.c: (gst_object_set_name_default),
(gst_object_set_name):
Random micro-optimisation: don't use a hash table
with strings as keys and the usual strdup/strcmp
involved, but rather just use the GQuark of the
type name as key, since it needs to be looked up
anyway to get the type name string.
* tests/check/gst/gstobject.c: (GST_START_TEST):
Fix various leaks.
Original commit message from CVS:
* gst/gstbin.c: (compare_interface), (gst_bin_get_by_interface),
(gst_bin_iterate_all_by_interface):
Can't use GPOINTER_TO_INT and GINT_TO_POINTER with GTypes.
GTypes are gulongs and thus the top 4 bytes might be cut
off on some platforms when doing GPOINTER_TO_INT, leading
to invalid GTypes and bad things happening.
Also add a check to make sure the type passed in is really
an interface type.
Original commit message from CVS:
* Makefile.am:
* configure.ac:
* gst-element-check.m4:
* gst-element-check.m4.in:
Make gst-element-check-$VERSION.m4 call gst-inspect-$VERSION
instead of the unversioned gst-inspect (#324176, #168659).
Original commit message from CVS:
* libs/gst/base/gstbasesrc.c: (gst_base_src_class_init),
(gst_base_src_wait), (gst_base_src_update_length),
(gst_base_src_get_range), (gst_base_src_default_check_get_range),
(gst_base_src_check_get_range), (gst_base_src_pad_check_get_range),
(gst_base_src_loop), (gst_base_src_start),
(gst_base_src_activate_pull):
Update docs.
blocksize == 0 now means the default blocksize when working in push
based mode.
Remove some pointless asserts in _wait function.
Fix offset/length calculations and EOS handling. We can now pull 0
bytes as well, which is allowed.
use _check_get_range() to decide if we can operate in _pull based
mode.
Fix refcounting leak when check_get_range function was not
implemented.
API GstBaseSrc::blocksize range can be 0 too now (default)
* tests/check/elements/filesrc.c: (GST_START_TEST),
(filesrc_suite):
Added check to test _get_range() behaviour.
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_chain_unchecked), (gst_pad_chain),
(gst_pad_push), (gst_pad_check_pull_range), (gst_pad_get_range),
(gst_pad_pull_range):
* gst/gstpad.h:
Lots of comments and docs added to the pad functions.
Flesh out the expected behaviour of the get_range() functions.
Original commit message from CVS:
* win32/common/libgstbase.def:
* win32/common/libgstdataprotocol.def:
* win32/common/libsgtreamer.def:
Add new exported functions.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_preroll_object),
(gst_base_sink_loop), (gst_base_sink_get_position):
When operating in pull mode update the offset so that we
read sequentially.
Original commit message from CVS:
* gst/gstregistryxml.c: (read_string):
Avoid strdup. (will happen in libxml, but hey!)
* gst/gsturi.c:
Add some more docs.
Original commit message from CVS:
* gst/gstbuffer.c: (_gst_buffer_copy), (gst_buffer_create_sub):
* tests/check/gst/gstbuffer.c: (GST_START_TEST),
(gst_buffer_suite):
No point in checking if the size of the subbuffer > 0, the
code handles it correclty as demonstrated by unit test.
Also add a unit test for the zero sized _new_and_alloc and
_copy. Fixes#346663.
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_prepare_output_buffer),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer):
Make sure the buffer we pass to transform_ip has a refcount of
1 and thus is writable. Fixes#343196
Original commit message from CVS:
* plugins/elements/gstfilesrc.c: (gst_file_src_class_init),
(gst_file_src_init), (gst_file_src_set_property),
(gst_file_src_get_property), (gst_file_src_map_region):
* plugins/elements/gstfilesrc.h:
Add "sequential" property, off by default, to use madvise and hint
to the kernel that sequential access is desired.
Touch all retrieved pages by default to ensure they are pulled
into memory. (Closes#345720)
Original commit message from CVS:
* gst/gstcaps.c: (gst_caps_new_empty), (_gst_caps_free),
(gst_caps_unref), (gst_static_caps_get),
(gst_caps_append_structure):
* gst/gstclock.c: (gst_clock_entry_new), (_gst_clock_id_free):
Use GSlice when the glib we build against is >= 2.10
Original commit message from CVS:
Patch by: Peter Kjellerstedt <pkj at axis dot com>
* gst/gst-i18n-app.h:
* gst/gst-i18n-lib.h:
* tools/gst-inspect.c: (print_signal_info):
The attached patch will make the inclusion of gettext.h unconditional in
gst/gst-i18n-app.h and gst/gst-i18n-lib.h, and it will remove the inclusion of
libintl.h in tools/gst-inspect.c.
This allows use of --disable-nls again and fixes#344642.
Original commit message from CVS:
* gst/gstpad.c: (handle_pad_block), (gst_pad_push_event):
Implement pad blocking on events according to part-block.txt.
More comments on behaviour.
* tests/check/gst/gstevent.c: (test_event):
Send event to peer pad of blocked pad (else it will block).
Original commit message from CVS:
* libs/gst/check/gstcheck.c: (gst_check_message_error),
(gst_check_run_suite):
if we get the wrong message, give us the types as string
* plugins/elements/gstfilesrc.c: (gst_file_src_start):
Fix a translatable
* tests/check/elements/filesrc.c: (GST_START_TEST):
add a test for trying to open a non-existing file
Original commit message from CVS:
* libs/gst/check/gstcheck.h:
add some assert_ as alias for fail_unless_*
* tests/check/gst/gst.c: (GST_START_TEST), (gst_suite):
increase test coverage
Original commit message from CVS:
* configure.ac:
don't set CFLAGS and friends for gcov, done from GST_GCOV now
* tests/check/Makefile.am:
clean up gcov files
Original commit message from CVS:
* gst/gstcaps.c: (gst_caps_remove_and_get_structure):
remove gst_caps_simplify; it was not declared and not used
and deprecated in 0.8
Original commit message from CVS:
* docs/faq/gst-uninstalled:
don't put empty paths on PYTHONPATH
* docs/gst/gstreamer-sections.txt:
remove some symbols that are not there
Original commit message from CVS:
* libs/gst/dataprotocol/Makefile.am:
build dataprotocol test by linking to the lib, instead of
compiling the source, so we get coverage
* tests/check/Makefile.am:
* tests/check/elements/filesrc.c: (event_func), (setup_filesrc),
(cleanup_filesrc), (GST_START_TEST), (filesrc_suite):
add a test for filesrc
Original commit message from CVS:
* tests/check/Makefile.am:
gst-inspect every element; this makes sure that we also get
coverage on element's get/set functions
* tests/check/gst/gststructure.c: (GST_START_TEST),
(gst_structure_suite):
Push coverage from 59.04% to 70.00%
Original commit message from CVS:
* configure.ac:
set CFLAGS and friends to -O0 if gcov is being used
add GCOV LIBS
* gst/Makefile.am:
* libs/gst/base/Makefile.am:
* libs/gst/check/Makefile.am:
* libs/gst/controller/Makefile.am:
* libs/gst/dataprotocol/Makefile.am:
* libs/gst/net/Makefile.am:
* plugins/elements/Makefile.am:
* plugins/indexers/Makefile.am:
add makefile rules to generate gcov data and clean up
* tests/check/Makefile.am:
add a coverage target that generates an html overview
of coverage data
Original commit message from CVS:
* libs/gst/check/gstcheck.c: (gst_check_run_suite):
* libs/gst/check/gstcheck.h:
create a macro and function so that the simple unit test
case can be just one macro to create main()
Original commit message from CVS:
* gst/gstbin.c: (gst_bin_restore_thyself):
* gst/gstxml.c: (gst_xml_make_element):
Fix deserialisation from XML. Set parent manually
instead of using gst_bin_add(), since gst_bin_add()
will unlink all pads of the element being added.
Fixes#341667.
Original commit message from CVS:
Patch by: Peter Kjellerstedt <pkj at axis com>
* gst/gst.c: (prepare_for_load_plugin_func), (split_and_iterate):
Fix missing g_strdup() and double free when using the
--gst-plugin-load command line option (#346097).
Original commit message from CVS:
* gst/gstinfo.c:
Promote GST_DEBUG_CATEGORY_STATIC in example in docs.
* libs/gst/net/gstnetclientclock.c:
* libs/gst/net/gstnettimeprovider.c:
Use GST_DEBUG_CATEGORY_STATIC here too (#342503).
Original commit message from CVS:
* gst/gstelement.c: (gst_element_pads_activate):
We need to deactivate src pads first and then sink pads.
The reason is the src pads might be blocking while holding the streaming
lock, so we need to deactivate them first so that deactivating the sink
pads doesn't block (since it will require the streaming lock).
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_buffer_alloc):
Forgot to remove two unneeded unrefs.
Simplify a check _is_equal allready checks the obvious case.
Original commit message from CVS:
* gst/gstcaps.c: (gst_caps_replace):
Fix crasher when passed NULL. Doc clarification.
Optimize for the trivial case.
* gst/gstpipeline.c: (gst_pipeline_change_state):
Small cleanups.
* libs/gst/base/gstbasesrc.c: (gst_base_src_loop):
Small documentation cleanup.
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_buffer_alloc):
Don't use silly gst_pad_get_negotiated_caps, GST_PAD_CAPS
is what we need and it avoids a whole lot of redundant
refcount operations.
Original commit message from CVS:
Patch by: Philip Jägenstedt <philip at lysator liu se>
* docs/manual/advanced-dataaccess.xml:
Fix 'Embedding static elements' section to use
GST_PLUGIN_DEFINE_STATIC (#345607).
Original commit message from CVS:
* tests/check/pipelines/simple-launch-lines.c: (test_stop_from_app):
Attempt to 'fix' spuriously failing test case: it seems like the
timeout of half a second is simply too small when the system is under
load otherwise, and the timeout doesn't really seem to serve any
particular purpose here. Give the pipeline a few seconds to preroll
first, and then give it another half a second to go from PAUSED to
PLAYING and marshal the message into the main thread.
Original commit message from CVS:
* tests/check/gst/gstghostpad.c: (block_callback),
(GST_START_TEST), (gst_ghost_pad_suite):
Added some more ghostpad tests, mainly blocking
and probes.
Original commit message from CVS:
* plugins/elements/gstfilesink.c: (gst_file_sink_open_file),
(gst_file_sink_close_file), (gst_file_sink_do_seek),
(gst_file_sink_event), (gst_file_sink_render):
* plugins/elements/gstfilesink.h:
Check if we can seek in the file instead of assuming
we always can. Post an error when we are asked to seek in a
non-seekable file (like a fifo). Fixes#343312.
Some cleanups.
Original commit message from CVS:
* docs/manual/advanced-autoplugging.xml:
* docs/manual/basics-helloworld.xml:
* docs/manual/highlevel-components.xml:
Don't leak bus reference in sample code.
Original commit message from CVS:
* autogen.sh:
Add default for new --enable-plugin-docs switch.
* configure.ac:
Use new GST_PLUGIN_DOCS macro to check for pyxml etc.
Fixes#344039.
* docs/Makefile.am:
Use new ENABLE_PLUGIN_DOCS conditional.
Original commit message from CVS:
* gst/gstbin.c: (bin_query_duration_done), (gst_bin_query):
Make it clear with a FIXME and a real define what the #if 0
previously disabled.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_configure_segment),
(gst_base_sink_preroll_object), (gst_base_sink_get_position):
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_sink_eventfunc):
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_event):
Don't randomly and silently reset a segment when the format
changes as this is a bug somewhere upstream. Fixes#330379.
Original commit message from CVS:
Patch by: Wouter Paesen <wouter at kangaroot net>
* libs/gst/controller/gstcontroller.c:
(gst_controlled_property_new):
Fix controlling of float properties (#344849).
* tests/check/libs/controller.c:
(gst_test_mono_source_get_property),
(gst_test_mono_source_set_property),
(gst_test_mono_source_class_init), (GST_START_TEST):
While we're at it, add some float stuff to unit test.
Original commit message from CVS:
* docs/README:
* docs/images/gdp-header.svg:
add a gdp image
* docs/libs/Makefile.am:
* docs/libs/gdp-header.png:
* libs/gst/dataprotocol/dataprotocol.c:
add it to the API docs
* docs/manual/intro-motivation.xml:
fix typo
Original commit message from CVS:
* gst/gst.c: (scan_and_update_registry), (init_post):
If the fork()'ed child process can't write the updated registry cache
file to disk for some reason, make it exit with a failure exit code,
so that the parent can then re-scan the plugins itself and update the
registry structures in memory and work with that (rather than failing
when creating elements because seemingly no plugins are available).
Refactor registry scanning code into separate function for this and
also separate fork() and non-fork() code paths. Fixes#344748.
Original commit message from CVS:
* gst/gstregistryxml.c: (gst_registry_xml_write_cache):
Fix silly bug that prevented us from creating
~/.gstreamer-0.10 and writing the registry in one
go (the first call to g_mkstemp() would overwrite the
placeholder in the template string, so the second call
to g_mkstemp() after creating the missing directory
would then error out with 'invalid argument').
Original commit message from CVS:
* gst/gstsegment.c: (gst_segment_set_duration),
(gst_segment_set_last_stop), (gst_segment_set_seek),
(gst_segment_set_newsegment_full), (gst_segment_to_stream_time),
(gst_segment_to_running_time), (gst_segment_clip):
Use G_UNLIKELY to help the compiler a bit.
Original commit message from CVS:
* gst/gstbuffer.c: (gst_buffer_get_type), (gst_buffer_finalize),
(_gst_buffer_copy), (gst_buffer_is_metadata_writable),
(gst_subbuffer_finalize), (gst_buffer_create_sub),
(gst_buffer_is_span_fast), (gst_buffer_span):
Init _type for consistency.
Use _FLAGS macro to avoid type check.
Avoid unneeded type checks in subbufer code.
Original commit message from CVS:
* gst/gstobject.c: (gst_object_get_type), (gst_object_ref),
(gst_object_unref):
Add G_UNLIKELY in type registration.
Avoid type check in _ref/_unref since that is also
done in glib.
Original commit message from CVS:
* gst/gstinfo.c: (gst_debug_set_active),
(gst_debug_category_set_threshold), (_gst_debug_nameof_funcptr):
* gst/gstinfo.h:
Add some G_[UN]LIKELY.
Maintain __gst_debug_min to avoid formatting the arguments of
debug messages that will be dropped anyway to avoid a lot of
overhead from the debugging system.
Original commit message from CVS:
* po/POTFILES.in:
* po/POTFILES.skip:
add missing files containing translatable strings, tell intltool about
one exception
Original commit message from CVS:
* gst/gst.c: (init_post):
use _exit() instead of exit() in our forked child; this ensures
that none of the registered exit handlers from whatever is using
GStreamer get executed. This fixes gnome-mixer-applet failing
to load, because ORBit would shut down.
Spotted by: Edward Hervey <edward@fluendo.com>
Fix suggested by: Tim-Philipp Müller <tim at centricular dot net>
Fixes#344474
Original commit message from CVS:
* gst/gstindex.c: (gst_index_gtype_resolver):
* tools/gst-xmlinspect.c: (print_plugin_info):
Fix leak spotted by coverity checker. Fixes#343827
Fix another other leak found by paolo borelli.
Original commit message from CVS:
* libs/gst/check/gstcheck.c: (gst_check_abi_list):
* libs/gst/check/gstcheck.h:
factor out the method from tests that checks size of structures,
and add code to generate the header containing these sizes
* tests/check/gst/gstabi.c: (GST_START_TEST):
* tests/check/gst/struct_i386.h:
* tests/check/libs/libsabi.c: (GST_START_TEST):
* tests/check/libs/struct_i386.h:
use it
Original commit message from CVS:
* gst/gst.c:
plugin_paths is not used if we build without registry support.
* gst/gstsegment.c: (gst_segment_copy):
_copy() was always returning NULL...
Original commit message from CVS:
* libs/gst/dataprotocol/dataprotocol.c:
(gst_dp_header_from_buffer), (gst_dp_packet_from_caps),
(gst_dp_packet_from_event):
factor out CRC code
Original commit message from CVS:
* libs/gst/check/gstcheck.c: (gst_check_init),
(gst_check_chain_func):
* libs/gst/check/gstcheck.h:
Add a cond/mutex to the check support lib, signal this whenever we
add to the buffers list. This will allow tests to not busy-wait on
the buffer-list.
Original commit message from CVS:
* libs/gst/dataprotocol/dataprotocol.c:
(gst_dp_header_from_buffer), (gst_dp_packet_from_caps),
(gst_dp_packet_from_event):
factor out some common header init code
Original commit message from CVS:
* docs/libs/gstreamer-libs-sections.txt:
* docs/libs/tmpl/gstdataprotocol.sgml:
* libs/gst/dataprotocol/dataprotocol.c: (gst_dp_crc):
* libs/gst/dataprotocol/dataprotocol.h:
API: make gst_dp_crc() public
Original commit message from CVS:
Patch by: Alessandro Decina <alessandro at nnva dot org>
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_stop):
Make sure the EOS flag is cleared from pads after a flush
or stop. Fixes#343538.
* tests/check/libs/collectpads.c: (GST_START_TEST),
(gst_collect_pads_suite):
Added test for collectpads reusage after EOS.
Original commit message from CVS:
* gst/gst.c:
set #include <sys/wait.h> in a #ifdef #ifdef HAVE_FORK
* win32/common/libgstbase.def:
export gst_collect_pads_set_flushing
* win32/common/libgstreamer.def:
export gst_pad_set_acceptcaps_function, gst_structure_empty_new,
gst_value_fraction_multiply
* win32/vs6/gst_inspect.dsp:
add a link to intl.lib
Original commit message from CVS:
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_remove_pad),
(gst_collect_pads_chain):
Handle the case where a pad is removed from the collection
that could cause the other pads to become collectable.
Original commit message from CVS:
* gst/gstelement.c:
Clarify the use of _release_request_pad() and
_get_request_pad() a bit better.
* libs/gst/base/gstadapter.c: (gst_adapter_peek),
(gst_adapter_take_buffer):
Fix some doc and comment typos.
Original commit message from CVS:
* gst/gstsystemclock.c: (gst_system_clock_id_wait_unlocked):
Add debug that can be enabled using a #define at the top of the file,
for dumping stats about how late/early we were when waking up from
waiting on the clock.
Original commit message from CVS:
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_check_pads):
When rebuilding the pad list, don't leak the previous list.
Original commit message from CVS:
Patch by: Lutz Mueller <lutz at topfrose dot de>
* libs/gst/base/gstbasesrc.c: (gst_base_src_class_init),
(gst_base_src_get_query_types), (gst_base_src_update_length):
Publish supported query types.
Update last_stop field in get_range mode so the position
query works. Fixes#342321.
Original commit message from CVS:
Patch by: Alessandro Decina <alessandro at nnva dot org>
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_remove_pad):
Unlock mutex when removing an unknown pad.
Fixes#343334.
* tests/check/Makefile.am:
* tests/check/libs/collectpads.c: (collected_cb), (push_buffer),
(push_event), (setup), (teardown), (GST_START_TEST),
(gst_collect_pads_suite), (main):
Added collecpads check, disabled for now as check crashes for
some reason.
Original commit message from CVS:
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/base/gstcollectpads.c:
(gst_collect_pads_set_flushing_unlocked),
(gst_collect_pads_set_flushing), (gst_collect_pads_start),
(gst_collect_pads_stop):
* libs/gst/base/gstcollectpads.h:
API: gst_collect_pads_set_flushing
Added api to set the pads to flushing, usefull for seeking
code in elements using collectpads.
Clear segment when receiving a flush.
Original commit message from CVS:
* gst/gst.c: (add_path_func), (init_post):
Don't scan registry paths passed via --gst-plugin--path immediately
(will crash, because absolutely nothing is set up and no types are
registered etc.); do this later in init_post(). Fixes#343057.
Original commit message from CVS:
* gst/gst.c: (init_post):
if we have fork, fork while reading/rebuilding the registry
so the parent doesn't take the hit of having all plugins loaded
in memory. Fixes#342777.
* configure.ac:
Check if we have fork()
* win32/common/config.h.in:
no fork() on win32
Original commit message from CVS:
* plugins/elements/gstelements.c:
* plugins/elements/gstfilesrc.c: (gst_file_src_class_init),
(gst_file_src_init), (gst_file_src_set_property),
(gst_file_src_get_property), (gst_file_src_start):
* plugins/elements/gstfilesrc.h:
Add a use-mmap property to enable easier testing of all code paths.
Bump rank to PRIMARY, so filesrc is the preferred file reader and used
in the absence of gnomevfssrc. (Closes#340501)
Original commit message from CVS:
2006-05-26 Zaheer Abbas Merali <zaheerabbas at merali dot org>
* tools/gst-inspect.c:
Add missing include, removes warning of ngettext not being defined on
some arches.
Original commit message from CVS:
* gst/gstvalue.c: (gst_value_deserialize_fraction):
Handle NULL input and output pointers silently as a failed conversion,
rather than g_warnings.
Original commit message from CVS:
* libs/gst/base/gsttypefindhelper.c: (buf_helper_find_peek):
Fix off-by-one bug that would only allow peeks of N-1 bytes
from the start even if the buffer to typefind on contains
in fact N bytes of data (makes vorbis typefinding from a
vorbis identification header buffer work).
* tests/check/Makefile.am:
* tests/check/libs/.cvsignore:
* tests/check/libs/typefindhelper.c: (GST_START_TEST),
(gst_typefindhelper_suite), (main), (foobar_typefind),
(plugin_init):
Add very basic unit test for gst_type_find_helper_for_buffer()
that checks for the problem fixed above.
Original commit message from CVS:
Patch by: Julien Moutte <julien at moutte net>
* docs/gst/gstreamer-sections.txt:
Make new GST_FLOW_IS_SUCCESS macro visible in docs.
* plugins/elements/gstfakesink.c: (gst_fake_sink_class_init),
(gst_fake_sink_preroll):
* plugins/elements/gstfakesink.h:
Add new ::preroll-handoff signal (#337100).
Original commit message from CVS:
* gst/gstpad.c: (gst_flow_get_name), (gst_flow_to_quark):
* gst/gstpad.h:
Added _CUSTOM error and success GstFlowReturn that can be
used be elements internally.
Added macro to check for SUCCESS flowreturns.
API: GST_FLOW_CUSTOM_SUCCESS
API: GST_FLOW_CUSTOM_ERROR
API: GST_FLOW_IS_SUCCESS
* tests/check/gst/gstpad.c: (GST_START_TEST), (gst_pad_suite):
Added check for GstFlowReturn sanity.
Original commit message from CVS:
Patch by: Mark Nauwelaerts <manauw at skynet dot be>
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_remove_pad),
(gst_collect_pads_event):
clear/reset segment info in FLUSH_STOP.
Fixes#336929.
Original commit message from CVS:
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_stop),
(gst_collect_pads_check_collected):
Flush queued buffer on _stop(), fixes playing again (#342454)
Original commit message from CVS:
* docs/faq/developing.xml:
* docs/faq/faq.xml:
* docs/faq/troubleshooting.xml:
* docs/faq/using.xml:
Some minor FAQ updates that won't change the fact that
our FAQ is badly structured, full of information hardly
anyone new to GStreamer needs to know and lacking lots
of information people constantly ask for.
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_set_caps):
Short-circuit gst_pad_set_caps if setting the existing
caps pointer again, and avoid printing debug and
reffing/unreffing the caps.
* plugins/elements/gstqueue.c: (gst_queue_push_one):
There's actually no need to set the caps before pushing -
the acceptcaps method will handle it anyway.
Original commit message from CVS:
* gst/gsttypefind.c: (gst_type_find_get_type):
* gst/gsttypefind.h:
Added GST_TYPE_TYPE_FIND and gst_type_find_get_type() so a GType gets
registered for GstTypeFind pointers. This allows wrapping the structure
in bindings (i.e. gst-python).
Original commit message from CVS:
* plugins/elements/gstcapsfilter.c: (gst_capsfilter_prepare_buf):
The caps intersection algorithm can produce multiple copies of the
caps. Until that is fixed, we need to simplify the result to be
sure whether the allowed caps are fixed or not.
* plugins/elements/gstqueue.c: (gst_queue_init),
(gst_queue_bufferalloc), (gst_queue_acceptcaps),
(gst_queue_push_one):
Proxied buffer alloc should not set the caps on the source pad.
When pushing buffers, we always accept the caps change that triggers.
This prevents negotiation errors caused by caps changing mid-stream
and then being refused on our source pad (because upstream is now
refusing those caps).
Original commit message from CVS:
* tests/examples/helloworld/helloworld.c: (main):
Must plug audioconvert and audioresample between decoder
and audio sink.
Original commit message from CVS:
* gst/gstregistryxml.c: (read_string), (load_pad_template),
(load_feature), (load_plugin):
Allow empty strings for some of the plugin fields so we don't
drop valid plugin entries that were written out correctly.
Original commit message from CVS:
* gst/gstregistryxml.c: (gst_registry_xml_write_cache):
Use g_remove and g_rename instead of remove and rename that don't
handle utf8 characters. rename was failing for users who had specific
characters in their name then the registry was built at each gstreamer init.
* win32/vs6/gst_inspect.dsp:
* win32/vs6/gst_launch.dsp:
* win32/vs6/libgstbase.dsp:
* win32/vs6/libgstcoreelements.dsp:
* win32/vs6/libgstreamer.dsp:
Use a debug version of libxml2 (libxml2D.lib,libxml2D.dll) for DEBUG build
of libgstreamer and clean unused libraries in project links settings.
Original commit message from CVS:
* plugins/elements/gstqueue.c: (gst_queue_push_one):
The queue is not responsible for pushing an EOS when receiving a fatal
flow error. It's up to the real element driving the pipeline to do that.
Original commit message from CVS:
* plugins/elements/gstqueue.c: (gst_queue_push_one):
The queue was posting a non-needed GST_MESSAGE_ERROR when pushing a
buffer returned a fatal error. It should just send an EOS and stop
it's task.
Upstream elements will then properly receive the GST_FLOW_UNEXPECTED
when pushing buffers on the queue and will be able to handle the event.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_get_position):
Don't report POSITION based on clock time if sync is
disabled in a sink.
Original commit message from CVS:
* gst/gstobject.h:
Add cast to make compiler happy - refcount variable was a gint
in GstObject but is a guint in GObject and g_atomic_int_get()
wants a gint *.
Original commit message from CVS:
* tools/gst-launch.c: (print_tag):
Fix use of uninitialized variable in the hypothetical
case that some broken plugin creates a GST_TAG_IMAGE
tag containing a NULL buffer (#341667).
Original commit message from CVS:
* tools/gst-launch.c: (print_tag):
Print something more intelligible for image tags when
using the -t switch (#341556).
Original commit message from CVS:
* Makefile.am:
updates for win32
* configure.ac:
define GST_MAJORMINOR so we have it available in win32/common/config.h
Possibly remove it from our Makefile.am files later
* win32/common/config.h:
* win32/common/config.h.in:
added GST_MAJORMINOR
* win32/common/gstenumtypes.c: (register_gst_resource_error):
* win32/common/gstversion.h:
updated
Original commit message from CVS:
* plugins/elements/gstqueue.c: (gst_queue_chain), (gst_queue_loop),
(gst_queue_set_property):
Don't forget to signal the _chain or _loop function
when the queue size or thresholds change since that might
cause them to make progres again.
Original commit message from CVS:
* gst/gstbuffer.c: (_gst_buffer_initialize):
Register subbufer along with the buffer type so that
it does not accidentally gets registered from N
different streaming threads in a non threadsafe way.
Original commit message from CVS:
* gst/gstbuffer.h:
* gst/gstevent.h:
* gst/gstmessage.h:
Make gtk-doc generate docs for our inlined gst_buffer_ref(),
gst_event_ref() and gst_message_ref() functions again
(ugly hack, please do fix if there's a better way besides
overrides.txt, which doesn't seem to work).
Original commit message from CVS:
2006-05-10 Thomas Vander Stichele <thomas at apestaart dot org>
* libs/gst/check/gstcheck.h:
add an assert for setting state to avoid lots of repetitive code
in the future
Original commit message from CVS:
* gst/gstvalue.c: (gst_value_serialize_flags):
fix a leak if no flags are set
* tests/check/gst/gstvalue.c: (GST_START_TEST):
fix leak in tests
Original commit message from CVS:
* docs/manual/basics-pads.xml:
Expand a bit on caps and filtered links and update
examples that were still using the no longer existing
gst_pad_link_filtered() (#338206).
Original commit message from CVS:
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_finalize),
(gst_collect_pads_add_pad), (gst_collect_pads_remove_pad),
(gst_collect_pads_set_flushing), (gst_collect_pads_start),
(gst_collect_pads_stop):
* libs/gst/base/gstcollectpads.h:
No need to call _stop in _finalize.
Iterate the main pad list in _finalize.
Added some more debug.
Free lists and data in the right order.
Also free data whem doing _remove_pad when stopped for
backward compatibility protect ::started with PAD_LOCK as
well.
Original commit message from CVS:
* gst/gststructure.c: (gst_structure_gtype_from_abbr),
(gst_structure_parse_value):
add some comments
rename a method so that it actually says what it does better
Original commit message from CVS:
* gst/gstevent.c: (_gst_event_initialize):
* gst/gstformat.c: (_gst_format_initialize):
make sure some essential types used by events are registered
as part of gst_init()
* gst/gstvalue.c: (gst_value_serialize_flags):
if no flags are set, serialize them to a value that represents NONE
so that deserializing them works
* tests/check/gst/gstvalue.c: (GST_START_TEST), (gst_value_suite):
add tests for serialization and deserialization of flags
Original commit message from CVS:
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_collect),
(gst_collect_pads_collect_range), (gst_collect_pads_available),
(gst_collect_pads_check_pads), (gst_collect_pads_check_collected),
(gst_collect_pads_event), (gst_collect_pads_chain):
Update docs.
Better debug info.
Catch and return errors from the collect function
Refuse data on eos pads.
Original commit message from CVS:
* gst/gstinterface.h:
GST_IMPLEMENTS_INTERFACE and GST_IS_IMPLEMENTS_INTERFACE use the normal
GInterface type checking.
They were previously using non-defined macros.
Original commit message from CVS:
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_init),
(gst_collect_pads_finalize), (gst_collect_pads_add_pad),
(gst_collect_pads_remove_pad), (gst_collect_pads_set_flushing),
(gst_collect_pads_start), (gst_collect_pads_stop),
(gst_collect_pads_peek), (gst_collect_pads_pop),
(gst_collect_pads_available), (gst_collect_pads_read),
(gst_collect_pads_flush), (gst_collect_pads_check_pads),
(gst_collect_pads_is_collected), (gst_collect_pads_event),
(gst_collect_pads_chain):
* libs/gst/base/gstcollectpads.h:
Clean up the mess that is collectpads, add comments and
FIXMEs where needed.
Maintain a separate pad list so we can add pads while
collecting the other ones. For this we need a new separate
lock (see comics).
Fix memory leak in finalize.
Refactor some weird code to set/unset pad flushing flags, mark
with comments.
Don't crash in _available, _read, _flush when we're EOS.
* tests/check/libs/.cvsignore:
Ignore adapter check binary.
Original commit message from CVS:
* gst/gstbuffer.c: (gst_buffer_make_metadata_writable):
gst_buffer_make_metadata_writable() should maintain the
buffer flags (those that make sense at least) (see #340859).
Original commit message from CVS:
* tools/gst-inspect.c:
* tools/gst-launch.c:
* tools/gst-typefind.c:
* tools/gst-xmlinspect.c:
* tools/tools.h:
Fix up includes: need to include stdlib.h in tools.h for exit().
Original commit message from CVS:
* libs/gst/base/gstbasesrc.c: (gst_base_src_perform_seek),
(gst_base_src_loop), (gst_base_src_change_state):
Always push non-flushing serialized events in the streaming
thread.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_configure_segment):
Add applied_rate to the debug
* libs/gst/base/gstbasesrc.c: (gst_base_src_perform_seek):
Copy applied_rate into the outgoing NEWSEGMENT event
Original commit message from CVS:
Patch by: Philippe Rouquier <philippero at libertysurf dot fr>
* libs/gst/base/gstbasesink.c: (gst_base_sink_set_flushing),
(gst_base_sink_change_state):
call ::unlock before taking the PREROLL_LOCK so we can safely
handle elements that lock in ::render.
Fixes#340174.
Original commit message from CVS:
* autogen.sh: (CONFIGURE_DEF_OPT):
Darwin's libtoolize is in fact called glibtoolize.
Adding glibtoolize to the list of accepted names for libtoolize.
Original commit message from CVS:
* libs/gst/base/gstbasesrc.c: (gst_base_src_loop):
Unify error handling, don't post an error message
when a push() returns EOS but perform our normal EOS
handling code. Fixes#340772.
Original commit message from CVS:
* docs/design/part-overview.txt:
Make upsteam/downstream concepts more clear.
Give an example of serialized/non-serialized events.
* docs/design/part-events.txt:
* docs/design/part-streams.txt:
Mention applied_rate.
* docs/design/part-trickmodes.txt:
Mention applied rate, flesh out some more use cases.
* gst/gstevent.c: (gst_event_new_new_segment),
(gst_event_parse_new_segment), (gst_event_new_new_segment_full),
(gst_event_parse_new_segment_full), (gst_event_new_tag),
(gst_event_parse_tag), (gst_event_new_buffer_size),
(gst_event_parse_buffer_size), (gst_event_new_qos),
(gst_event_parse_qos), (gst_event_parse_seek),
(gst_event_new_navigation):
* gst/gstevent.h:
Add applied_rate field to NEWSEGMENT event.
API: gst_event_new_new_segment_full()
API: gst_event_parse_new_segment_full()
* gst/gstsegment.c: (gst_segment_init), (gst_segment_set_seek),
(gst_segment_set_newsegment), (gst_segment_set_newsegment_full),
(gst_segment_to_stream_time), (gst_segment_to_running_time):
* gst/gstsegment.h:
Add applied_rate to GstSegment structure.
Make calculation of stream_time and running_time more correct
wrt rate/applied_rate.
Add some more docs.
API: GstSegment::applied_rate field
API: gst_segment_set_newsegment_full();
* libs/gst/base/gstbasesink.c: (gst_base_sink_configure_segment),
(gst_base_sink_get_sync_times), (gst_base_sink_get_position):
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_sink_eventfunc),
(gst_base_transform_handle_buffer):
Parse and use applied_rate in the GstSegment field.
* tests/check/gst/gstevent.c: (GST_START_TEST):
Add check for applied_rate field.
* tests/check/gst/gstsegment.c: (GST_START_TEST),
(gstsegments_suite):
Add more checks for various GstSegment operations.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_get_sync_times),
(gst_base_sink_do_sync), (gst_base_sink_chain_unlocked),
(gst_base_sink_get_position), (gst_base_sink_change_state):
Store the sync time of the buffer end position separatly in a
new variable eos_rtime so we can properly sync the EOS event.
Fixes#340697.
Fix the docs for gst_base_sink_set_qos_enabled().
Don't set segment start to invalid value when we receive a
non TIME newsegment.
get closer to handling position reporting for negative rates
correctly.
Original commit message from CVS:
* gst/gstcaps.c:
Docs about how to print caps for debug purposes.
* gst/gstpadtemplate.c: (gst_static_pad_template_get):
use gst_caps_make_writable instead of gst_caps_copy, Fixes#340608
Original commit message from CVS:
* gst/gstelement.c:
use full enum names and preprend a '%' in docs strings to make recent
gtk-doc turn that into a link
Original commit message from CVS:
* docs/manual/basics-bins.xml:
* docs/manual/basics-bus.xml:
* docs/manual/basics-pads.xml:
Some typo fixes, some additions, some clarifications.
Original commit message from CVS:
* tools/gst-inspect.c: (main):
* tools/gst-launch.c: (main):
* tools/gst-run.c: (main):
* tools/gst-typefind.c: (main):
* tools/gst-xmlinspect.c: (main):
Use the string passed to g_option_context_new() for
what it's intended for - the program name is already
printed elsewhere.
Original commit message from CVS:
* tools/Makefile.am:
* tools/gst-inspect.c: (main):
* tools/gst-launch.c: (main):
* tools/gst-xmlinspect.c: (main):
* tools/tools.h:
Add back --version command line option (#340460).
* tools/gst-typefind.c: (have_type_handler), (typefind_file), (main):
Add --version option and use GOption for argument parsing; refactor a
bit; accept directories as arguments and recurse into them; lastly,
print a decent error message when things go wrong.
Original commit message from CVS:
* gst/gstbuffer.h:
* gst/gstminiobject.c:
Add note about refcounting and miniobject/buffer writeability
to docs. Fixes#340604
* gst/gstelementfactory.h:
Added some explanation about @klass.
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_init), (gst_pad_configure_sink),
(gst_pad_configure_src), (gst_pad_push):
Restore acceptcaps checking behaviour now that good plugins have
been released.
Original commit message from CVS:
Patch by: James Andrewartha <trs80 at tartarus uwa edu au>
* gst/gst.c:
* gst/gstbus.c:
* gst/gstclock.c:
* gst/gstevent.c:
* gst/gstformat.c:
* gst/gstmessage.c:
* gst/gstparse.c:
* gst/gstquery.c:
* gst/gstutils.c:
* gst/parse/Makefile.am:
* libs/gst/base/gstadapter.c:
* libs/gst/base/gstbasesrc.c:
* libs/gst/base/gstpushsrc.c:
* libs/gst/base/gsttypefindhelper.c:
* plugins/elements/gstfakesrc.c:
* plugins/elements/gstidentity.c:
Make sure gstprivate.h and/or config.h are
always included first, otherwise some of our
defines (like _FILE_OFFSET_BITS) might be
redefined in the system headers. Fixes build
on opensolaris (#340016).
Original commit message from CVS:
* docs/libs/gstreamer-libs-sections.txt:
API: addition: gst_adapter_take_buffer()
* libs/gst/base/gstadapter.c: (gst_adapter_push),
(gst_adapter_peek), (gst_adapter_take), (gst_adapter_take_buffer),
(gst_adapter_available_fast):
* libs/gst/base/gstadapter.h:
Prepare for optimizing the hell out of this hugely inefficient
piece of code.
Added gst_adapter_take_buffer() so we can at least start thinking
about subbuffering and merging.
Added some comments.
* tests/check/Makefile.am:
* tests/check/libs/adapter.c: (GST_START_TEST),
(gst_adapter_suite), (main):
Added GstAdapter check.
Original commit message from CVS:
* docs/libs/gstreamer-libs-sections.txt:
make sure GstBaseTransformClass shows up in the docs
* libs/gst/base/gstbasetransform.c:
* libs/gst/base/gstbasetransform.h:
move docs so gtk-doc picks it up now
Original commit message from CVS:
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_event):
back out the newsegment handling change, see #340060 for ongoing
discussion
Original commit message from CVS:
* tools/gst-run.c: (get_candidates), (main):
Fix wrong g_file_test() usage (see glib docs for why it doesn't
work); fix typo in error message. Fixes#340079.
Original commit message from CVS:
2006-04-29 Thomas Vander Stichele <thomas at apestaart dot org>
* tests/check/gst/gstghostpad.c: (GST_START_TEST):
add more asserts on refcounts
do more cleanup at end of tests
fix test leaks showing in FC5
Original commit message from CVS:
* plugins/elements/gsttypefindelement.c:
(gst_type_find_element_handle_event):
reverted wrong change and reflowed code to avoid others falling into
this trap
Original commit message from CVS:
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_event):
fix changelog entry about last collectpads change,
add notes about proper fix
Original commit message from CVS:
* gst/gst.c:
* gst/gstregistry.c: (gst_registry_scan_path_level),
(gst_registry_scan_path):
* gst/gstregistry.h:
only write out registry if it has changed, fixes#338339
Original commit message from CVS:
* gst/gst.c:
* gst/gstregistry.c: (gst_registry_scan_path_level),
(gst_registry_scan_path):
* gst/gstregistry.h:
only write out registry if it has changed, fixes#338339
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_event):
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_base_init),
(gst_collect_pads_is_collected), (gst_collect_pads_event):
more detailed debug and formatting cleanup
Original commit message from CVS:
* libs/gst/controller/gstcontroller.c:
(gst_controller_sync_values):
some little tuning
* tests/check/libs/controller.c: (GST_START_TEST),
(gst_controller_suite):
a new test for live value handling
Original commit message from CVS:
* gst/gstvalue.c: (gst_value_serialize_flags):
Avoid NULL dereference when trying to serialize flags containing
invalid values.
Original commit message from CVS:
* plugins/elements/gsttypefindelement.c:
(gst_type_find_element_handle_event):
If we get EOS before any data is accumulated, don't use
uninitialised local variables.
Original commit message from CVS:
* libs/gst/dataprotocol/dataprotocol.c: (gst_dp_packet_from_event),
(gst_dp_event_from_packet):
Fixes in reading/writing events over GDP (not currently used?) -
dereferencing NULL events for unknown/invalid event types, memory
leak, and change g_warning to GST_WARNING.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_is_too_late),
(gst_base_sink_do_render_stats), (gst_base_sink_render_object),
(gst_base_sink_get_position), (gst_base_sink_change_state):
When frame dropping is enabled, we should not ignore frames
without a duration.
Update some documentation.
Original commit message from CVS:
* plugins/elements/gstfdsink.c: (gst_fd_sink_render),
(gst_fd_sink_check_fd), (gst_fd_sink_update_fd):
handle EAGAIN, EINTR and short writes correctly. Also clean
up some error cases, avoid a deadlock on bad file descriptors and
use GST_DEBUG_OBJECT.
Fixes#339843
Original commit message from CVS:
* gst/gstvalue.c: (gst_value_serialize_buffer),
(gst_value_deserialize_buffer):
Don't try to serialize a GValue with a NULL buffer.
Fixes#339821.
* tests/check/gst/gstvalue.c: (GST_START_TEST), (gst_value_suite):
Added check for serialisation of NULL buffers.
Original commit message from CVS:
* gst/gstminiobject.c: (gst_value_take_mini_object):
Taking a NULL miniobject is valid, fix the case where
we try to unref the NULL miniobject.
Original commit message from CVS:
Patch by: Stefan Kost <ensonic at sonicpulse dot de>
* gst/gstbin.c: (gst_bin_handle_message_func):
Update docs.
Don't leak bin refcount when a state recalc is
in progress and we delay another one #339808.
Original commit message from CVS:
* docs/design/part-TODO.txt:
Mention QoS as an ongoing work item.
* docs/design/part-buffering.txt:
New doc about buffering that needs to be fleshed out
at some point.
* docs/design/part-qos.txt:
More QoS policy for decoders/demuxers/transforms
* docs/design/part-trickmodes.txt:
Small update.
Original commit message from CVS:
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/controller/gstcontroller.c: (gst_controller_unset),
(gst_controller_unset_all):
* libs/gst/controller/gstcontroller.h:
Added new method _unset_all() and fixed _unset()
* tests/check/libs/controller.c: (GST_START_TEST),
(gst_controller_suite):
Added two testcases for new and fixed method
Original commit message from CVS:
* libs/gst/net/gstnettimepacket.c: (gst_net_time_packet_send):
MSG_DONTWAIT is not defined on Cygwin, so work
around that (fixes#317048).
Original commit message from CVS:
* gst/gstelementfactory.c: (gst_element_register),
(gst_element_factory_create), (gst_element_factory_make):
Some cleanups.
Fixed a FIXME.
Updated docs (Fixes#131079)
* gst/gstpluginfeature.c: (gst_plugin_feature_load):
Small cleanups.
* tests/check/gst/gstelement.c: (GST_START_TEST),
(gst_element_suite):
Added testcase for elementfactory class field.
Original commit message from CVS:
* gst/gstsegment.c:
Added some more docs.
* libs/gst/base/gstbasesink.c: (gst_base_sink_perform_qos),
(gst_base_sink_reset_qos):
Calculate more accurate rate values.
Original commit message from CVS:
* gst/gst_private.h:
add a new #ifdef to use __declspec(dllimport) only for
other modules and not for gstreamer core
* gst/gstbasesink.c: (gst_base_sink_perform_qos):
use gst_guint64_to_gdouble for conversion
* win32/common/libgstreamer.def:
add new exported functions
* win32/vs6/gst_inspect.dsp:
* win32/vs6/gst_launch.dsp:
* win32/vs6/libgstbase.dsp:
* win32/vs6/libgstcontroller.dsp:
* win32/vs6/libgstcoreelements.dsp:
* win32/vs6/libgstdataprotocol.dsp:
* win32/vs6/libgstnet.dsp:
update project files
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_link):
Must set peer pads before calling the link function, otherwise
a task started from a link function might get a flow-not-linked
result when trying to push because the other thread where the
linking happens hasn't had a chance to set the peers yet. This
might happen for example when a queue gets linked to a downstream
element, as queue starts a streaming task when its source pad
gets linked. Happens in real life when playing back flac/musepack
files in playbin (#332390).
