Identity was ignoring seek and flush events even when using
a single segment. In the end it means that we couldn't compute
buffers running-time and stream time after seeks.
This commits adds support for flushing seeks only as I have no idea
what to do for non flushing ones.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/450>
In reverse playback, buffers are played back from buffer.stop
(buffer.pts + buffer.duration) to buffer.pts running times which
mean that we need to use the buffer end running time as a buffer
timestsamp, not the buffer pts when using a single segment in reverse
playback.
This is now being tested in
`validate.test.identity.reverse_single_segment`
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/450>
In reverse playback, buffers have to be displayed at buffer.stop running
time, otherwise a same set of buffer can't be displayed in the exact opposite
order to forward playback.
For example, seeking a video stream at 1fps with start=0, stop=5s, rate=1.0
will display the following buffers:
b0.pts = 0s, b0.duration = 1s - at running time = 0s
b1.pts = 1s, b1.duration = 1s - at running time = 1s
b2.pts = 2s, b2.duration = 1s - at running time = 2s
b3.pts = 3s, b3.duration = 1s - at running time = 3s
b4.pts = 4s, b4.duration = 1s - at running time = 4s
<wait at EOS for 1second>
Now, playing that reverse with start=0, stop=5s, rate=1.0 has to display
the following buffers:
b0.pts = 4s, b0.duration = 1s - at running time = 0s
b1.pts = 3s, b1.duration = 1s - at running time = 1s
b2.pts = 2s, b2.duration = 1s - at running time = 2s
b3.pts = 1s, b3.duration = 1s - at running time = 3s
b4.pts = 0s, b4.duration = 1s - at running time = 4s
<wait at EOS for 1second>
With the previous code, it reproduced the following:
b0.pts = 4s, b0.duration = 1s - at running time = 1s
b1.pts = 3s, b1.duration = 1s - at running time = 2s
b2.pts = 2s, b2.duration = 1s - at running time = 3s
b3.pts = 1s, b3.duration = 1s - at running time = 4s
b4.pts = 0s, b4.duration = 1s - at running time = 5s
<NO WAIT AT EOS AND POST EOS RIGHT AWAY>
This is being tested with the `validate.launch_pipeline.sink.reverse_playback_clock_waits.*`
set of tests
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/450>
In reverse playback, buffers are played back from buffer.stop
(buffer.pts + buffer.duration) to buffer.pts, which means that the
position after the buffer is consumed is buffer.pts, not buffer.pts -
buffer.duration.
Without that change, and when `automatic_eos` feature is on,
we were dropping the last buffers as marking the stream EOS one buffer
too soon.
This is now being tested extensively by GstValidate in the
`validate.test.clock_sync.*` set of tests.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/450>
We must not retry fclose() on EINTR as POSIX states:
After the call to fclose(), any use of stream results in undefined
behavior.
We ensure above with fflush() and fsync() that everything is written out
so chances of running into EINTR are very low. Nonetheless assume that
the file can't be safely renamed, we'll just try again on the next
opportunity.
CID #1462697
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/465>
...instead of a file descriptor so buffered I/O is used when writing
the binary cache. This boosts performance at startup, particularly on
network filesystems where writes may be quite slow.
Fixes gstreamer#545.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/458>
For value types that aren't subclassable, just check the type directly.
For flags, compare against the fundamental type directly instead of going through
the more expensive recursive check of `G_TYPE_CHECK_VALUE_TYPE()`
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/453>
The problem is that:
* g_value_init will end up allocating an internal list/array
* g_value_copy *clears* the existing value by calling the free func
and then the copy function (creating it again)
To avoid that alloc/free/alloc cycle, directly call the appropriate
function
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/453>
Previously this was:
* iterating and referencing all plugin features in a GList
* *then* filtering out the ones we want
* Was doing that filtering by name (i.e. `strcmp`) instead of direct pointer
comparision
Instead, just create a private direct function to get the list of plugin
features
Uses 4 times less instructions ...
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/462>
The intersection function table is a legacy of 2005, when one could
register random intersection functions. This is no longer the case.
The only place where that table was used was:
* `gst_value_can_intersect()`, where it was already only used for identical
GType
* `gst_value_intersect()`, where the table iteration was insanely expensive
Instead this patch:
* Only stored intersection functions for *different* types (of which there are
only 4)
* Make gst_value_intersect directly call the same-type intersection functions
and only use the table if ever it doesn't match.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/454>
This was going through a few locks and doing temporarily allocations for every
single task creation.. just to get a name.
We don't need to take locks since:
* The parent exists (we have a reference to it)
* The pad exists (the task belongs to it)
* Changing names of pad/elements when activating is a big no-no
Instead use the existing direct GST_DEBUG_PAD_NAME macro
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/455>
In static linking scenarios, this is required to avoid this error
building tests:
/work/prefix/lib/libgstcheck-1.0.a(check_run.c.o): In function `tcase_run_tfun_fork':
/work/gstreamer/_builddir/../../../src/gstreamer/libs/gst/check/libcheck/check_run.c:476: undefined reference to `timer_create'
/work/gstreamer/_builddir/../../../src/gstreamer/libs/gst/check/libcheck/check_run.c:483: undefined reference to `timer_settime'
/work/gstreamer/_builddir/../../../src/gstreamer/libs/gst/check/libcheck/check_run.c:493: undefined reference to `timer_delete'
/work/prefix/lib/libgstcheck-1.0.a(check.c.o): In function `check_get_clockid':
/work/gstreamer/_builddir/../../../src/gstreamer/libs/gst/check/libcheck/check.c:628: undefined reference to `timer_create'
/work/gstreamer/_builddir/../../../src/gstreamer/libs/gst/check/libcheck/check.c:629: undefined reference to `timer_delete'
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/447>
This reverts commit cd751c2de3.
Reverts https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/406
Fixes glviewconvert negotiation in e.g.:
gltestsrc ! glviewconvert output-mode-override=side-by-side ! glstereosplit name=s s.left ! queue ! fakesink s.right ! queue ! glimagesink
Problem here is that intersecting flagsets in gst_value_intersect will
always find a value comparison function but may fail a direct type
comparison due to flagsets supporting derived types. When flagset
derived types are intersected, an intersection will therefore always
fail.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/441>
If this is not done, tools like xdot fail with "unexpected char
b'\\'". This is a regression caused by commit
74938f07c2 (multiqueue: Add stats
property).
The deserialized value coming out of g_object_get_property looks like
this,
$24 = (gchar *) 0x7f560c0046a0 "application/x-gst-multi-queue-stats, queues=(structure)< \\\"queue_0\\\\,\\\\ buffers\\\\=\\\\(uint\\\\)39\\\\,\\\\ bytes\\\\=\\\\(uint\\\\)8
120251\\\\,\\\\ time\\\\=\\\\(guint64\\\\)1460000000\\\\;\\\", \\\"queue_1\\\\,\\\\ buffers\\\\=\\\\(uint\\\\)186\\\\,\\\\ bytes\\\\=\\\\(uint\\\\)838020\\\\,\\\\ time\\\\=\
\\\(guint64\\\\)1984000002\\\\;\\\" >;"
That is immediately looking wrong. I don't know enough about GNOME
serialization details to say with confidence what happened here. It
gets worse after this is sent through g_strescape and then written to
the dot file. Interestingly, dot -Tpng is fine to ignore them it
seems.
Since the stats are by definition verbose, I decided the best choice
to omit them from the dot file, since such details are not of interest
there.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/442>
To allow the refcounting tracer to work better. In childproxy/iterator
these might be plain GObjects but gst_object_unref() also works on them.
In other places where it is never GstObject, g_object_unref() is kept.
downloadbuffer source pad pushes the first buffer before pushing
Stream Start and Segment event, when working in Push mode.
Fix:Pushing Stream Start and Segment after coming out of
wait for data, and before pushing the buffer to next element.
Fixes#534
Since bash-completion 2.9, it was no longer possible to override
the completionsdir through prefix. [1] In 2.10, the overridability
was re-estabilished but this time through datadir variable. [2]
This should not really matter except for developers installing the project
into a custom prefix or distros using per-package prefixes like NixOS.
[1]: 81ba2c7e7d
[2]: https://github.com/scop/bash-completion/pull/344
