Use the string provided by the caller for the sinkpad name
if possible. Note that all sanity checking for this name
is already done in GstElement.
Fixes Bug #645931
It can happen that the currently active pad got the EOS event
before it was activated and the previously active pad got the
EOS event after it was deactivated. In that case we have to
send the EOS event from an inactive pad downstream.
This makes sure that during switches at no point in time all pads
have returned not-linked, which can happen when playing an audio-only
file with playbin2 and switching between the streams for example.
Fixes bug #644935.
Passing e.g. location=foo would lead to warnings because g_filename_to_uri()
wants an absolute file path and returns NULL otherwise. Use brand-new
gst_filename_to_uri() instead, which will try harder to create a proper
URI for us.
Also add unit test.
... which could lead to a premature eos being reported downstream,
rather than a successful partial read which would result when
performed directly on e.g. basesrc.
Once we switch to normal mode, we're not typefinding anymore and thus the caps
will not change. Therefore can avoid the object lock in the data-flow path.
The locking was added in order to fix bug #608877.
Adds getcaps/setcaps to output-selector and adds a property
to select which type of negotiation should be done.
The available modes are:
* none: no negotiation (current behavior), getcaps return ANY and
setcaps aren't set on any of the peers
* all: use all pads (default), getcaps returns the intersection of
peer pads and setcaps is set on all peers
* active: getcaps and setcaps are proxied to the active pad
https://bugzilla.gnome.org/show_bug.cgi?id=638381
This patch makes outputselector take an extra ref when pushing
the last_buffer to avoid it losing it during the switch function.
This makes resend-latest properly work if the active-pad is changed
during the switch function buffer pushing (on a pad probe, for example).
https://bugzilla.gnome.org/show_bug.cgi?id=629917
This patch makes output-selector always recheck if there's a
pending pad switch after pushing a buffer, preventing that
it pushes a buffer on the 'wrong' pad.
https://bugzilla.gnome.org/show_bug.cgi?id=629917
Using the end time makes it impossible to replace buffers, which is
a big problem for subtitles that could have very long durations.
Merged from gst-plugins-base, 27034be461.
There's not much point in using GST_DEBUG_FUNCPTR with GObject
virtual functions such as get_property, set_propery, finalize and
dispose, since they'll never be used by anyone anyway. Saves a
few bytes and possibly a sixteenth of a polar bear.
Merged from gst-plugins-base, 6f4c1ac583.
Replaced with "GStreamer maintainers
<gstreamer-devel@lists.sourceforge.net>" or just removed,
depending on the number of other authors.
Merged from gst-plugins-base, 0e9bc5125a.
Set the output caps on the srcpad before pushing the buffer because else core
will do a rather expensive check to see if we can actually accept those caps on
the srcpad.
Merged from gst-plugins-base, bdfb4b46d7.
Install a custom acceptcaps function instead of using the default expensive
check. We accept whatever downstream accepts so we pass along the acceptcaps
call to the downstream peer.
Merged from gst-plugins-base, 5b72f2adf9.
We should do the pad_alloc for the pending pad if any, as we will switch to that
pad on next _chain() call. Also do a fallback alloc, if there is no output yet to
not fail state transitions in dynamic pipelines.
When a segment event is received on the active pad, forward it downstream
immediately instead of deferring it until the next data buffer arrives. This
fixes problems with segment updates never being sent downstream, like those
needed for sparse streams, or for closing previously opened segments.
This fixes playback of DVD menus with a still video frame and an audio track,
for example.
Fixes: #577843
No short-desc as we have them in the element details.
Also keep things (Makefile.am and sections.txt) sorted.
Reword ambigous returns. No text after since please.
Original commit message from CVS:
* plugins/elements/gstinputselector.c:
Ensure we emit notify::active-pad when auto-selecting a pad
due to it having activity and us not having an existing active
pad. Fixes#563147
Original commit message from CVS:
* plugins/elements/gstinputselector.c: (gst_input_selector_event),
(gst_input_selector_query):
Gracefully handle the cases when we dont' have otherpad.
Fixes#556430
Original commit message from CVS:
* plugins/elements/gstinputselector.c: (gst_selector_pad_reset),
(gst_input_selector_reset), (gst_input_selector_change_state):
Reset the selector state when going to READY.
Original commit message from CVS:
* plugins/elements/gstinputselector.c: (gst_input_selector_init),
(gst_input_selector_event), (gst_input_selector_query):
Reuse the get_linked_pads for both source and sinkpads because they are
the same.
Implement a custum event handler and get the internally linked pad
directly instead of relying on the default (slower) implementation.
Original commit message from CVS:
* plugins/elements/gstinputselector.c: (gst_input_selector_init),
(gst_input_selector_query):
Implement the LATENCY query in a better way by taking the latency of all
sinkpads and taking the min/max instead of just taking a random pad.
Original commit message from CVS:
* plugins/elements/gstinputselector.c: (gst_selector_pad_bufferalloc),
(gst_selector_pad_chain), (gst_input_selector_getcaps),
(gst_input_selector_activate_sinkpad):
Move the select-all logic into the activation of the currently selected
pad. We want to remember the last pad with activity in select-all mode.
Fix the getcaps function, we can produce the union of the upstream caps
in select-all mode, not the intersection like proxy_getcaps() does.
Original commit message from CVS:
* plugins/elements/gstoutputselector.c:
* tests/icles/output-selector-test.c:
Use BOILERPLATE macro and update test to the latest api changes.
Original commit message from CVS:
* ext/dc1394/gstdc1394.c:
* ext/ivorbis/vorbisdec.c:
* ext/jack/gstjackaudiosink.c:
* ext/metadata/gstmetadatademux.c:
* ext/mythtv/gstmythtvsrc.c:
* ext/theora/theoradec.c:
* gst-libs/gst/app/gstappsink.c:
* gst/bayer/gstbayer2rgb.c:
* gst/deinterlace/gstdeinterlace.c:
* gst/rawparse/gstaudioparse.c:
* gst/rawparse/gstvideoparse.c:
* gst/rtpmanager/gstrtpbin.c:
* gst/rtpmanager/gstrtpclient.c:
* gst/rtpmanager/gstrtpjitterbuffer.c:
* gst/rtpmanager/gstrtpptdemux.c:
* gst/rtpmanager/gstrtpsession.c:
* gst/rtpmanager/gstrtpssrcdemux.c:
* plugins/elements/gstinputselector.c:
* plugins/elements/gstoutputselector.c:
* gst/videosignal/gstvideoanalyse.c:
* gst/videosignal/gstvideodetect.c:
* gst/videosignal/gstvideomark.c:
* sys/oss4/oss4-mixer.c:
* sys/oss4/oss4-sink.c:
* sys/oss4/oss4-source.c:
Do not use short_description in section docs for elements. We extract
them from element details and there will be warnings if they differ.
Also fixing up the ChangeLog order.
Original commit message from CVS:
* plugins/elements/gstinputselector.c:
(gst_input_selector_set_active_pad), (gst_input_selector_switch):
Do g_object_notify() only when not holding the lock to get the property
because otherwise we run into a deadlock with the deep-notify handlers
that are possibly installed.
Original commit message from CVS:
* plugins/elements/gstinputselector.c: (gst_selector_pad_class_init),
(gst_selector_pad_event), (gst_selector_pad_bufferalloc),
(gst_selector_pad_chain), (gst_input_selector_set_active_pad):
Release the selector lock when pad alloc happens on a non selected pad.
Original commit message from CVS:
* plugins/elements/gstinputselector.c: (gst_selector_pad_class_init),
(gst_selector_pad_init), (gst_selector_pad_set_property),
(gst_selector_pad_get_property), (gst_selector_pad_event),
(gst_selector_pad_bufferalloc), (gst_selector_pad_chain),
(gst_input_selector_set_active_pad):
Add pad property to configure behaviour of the unselected pad, it can
return OK or NOT_LINKED, based on the use case.
Original commit message from CVS:
* plugins/elements/gstinputselector.c:
(gst_selector_pad_get_running_time), (gst_selector_pad_reset),
(gst_selector_pad_event), (gst_selector_pad_bufferalloc),
(gst_input_selector_wait), (gst_selector_pad_chain),
(gst_input_selector_class_init), (gst_input_selector_init),
(gst_input_selector_dispose), (gst_segment_set_start),
(gst_input_selector_set_active_pad),
(gst_input_selector_set_property),
(gst_input_selector_get_property),
(gst_input_selector_get_linked_pad),
(gst_input_selector_is_active_sinkpad),
(gst_input_selector_activate_sinkpad),
(gst_input_selector_request_new_pad),
(gst_input_selector_release_pad),
(gst_input_selector_change_state), (gst_input_selector_block),
(gst_input_selector_switch):
* plugins/elements/gstinputselector.h:
Figure out the locking a bit more.
Mark buffers with discont after switching.
Fix initial segment forwarding, make sure to only forward one segment
regardless of what the sequence of buffers/segments is. See #522203.
Improve flushing when blocked.
Return NOT_LINKED when a stream is not selected.
Not API change for the switch signal in the docs.
Fix start/time/accum values of the new segment.
Correctly unlock and flush a blocking selector when going to READY.
Original commit message from CVS:
* plugins/elements/gstinputselector.c: (gst_selector_pad_event),
(gst_selector_pad_bufferalloc), (gst_selector_pad_chain),
(gst_input_selector_class_init),
(gst_input_selector_set_active_pad),
(gst_input_selector_set_property),
(gst_input_selector_push_pending_stop):
Add lots of debugging.
Fix time member in the newsegment event.
Original commit message from CVS:
* plugins/elements/gstinputselector.c: (gst_selector_pad_class_init),
(gst_selector_pad_finalize), (gst_selector_pad_get_property),
(gst_selector_pad_event), (gst_input_selector_class_init),
(gst_input_selector_init), (gst_input_selector_set_active_pad),
(gst_input_selector_set_property),
(gst_input_selector_get_property),
(gst_input_selector_request_new_pad),
(gst_input_selector_release_pad),
(gst_input_selector_push_pending_stop),
(gst_input_selector_switch):
* plugins/elements/gstinputselector.h:
Various cleanups.
Added tags to the pads.
Select active pad based on the pad object instead of its name.
Fix refcount in set_active_pad.
Add property to get the number of pads.
* plugins/elements/gstoutputselector.c:
(gst_output_selector_class_init),
(gst_output_selector_set_property),
(gst_output_selector_get_property):
Various cleanups.
Select the active pad based on the pad object instead of its name.
Fix locking when setting the active pad.
* plugins/elements/gstselector-marshal.list:
* tests/check/elements/selector.c: (cleanup_pad),
(selector_set_active_pad), (run_input_selector_buffer_count):
Fixes for pad instead of padname for pad selection.
Original commit message from CVS:
* plugins/elements/gstinputselector.c:
* plugins/elements/gstinputselector.h:
Added "select-all" property to make it work like aggregator in 0.8.
* plugins/elements/gstoutputselector.c:
Fix resend-latest behavoiur.
* tests/check/Makefile.am:
* tests/check/elements/.cvsignore:
* tests/check/elements/selector.c:
Add unit tests for selector.
Original commit message from CVS:
* gst/multifile/gstmultifilesink.c:
Add a fixme comment.
* plugins/elements/gstoutputselector.c:
Fix same leak as in input-selector.
* tests/icles/output-selector-test.c:
Improve the test.
Original commit message from CVS:
* plugins/elements/gstinputselector.c: (gst_selector_pad_event):
Don't leak event on pads that are not linked. Fixes#512826.
Other than saving an immense amount of 4 bytes of memory this
prevents clang from complaining and keeps the ring buffer state
in a single variable instead of two.
If downstream is operating in pull mode, short-circuit any pulls beyond
the end of the file and return FLOW_UNEXPECTED immediately instead of
sending a seek beyond the end of the file upstream, since this might
confuse upstream elements (and/or http servers, for example). Fixes
playback of apple trailers in totem and youtube/html5 clips in
WebkitGTK+.
https://bugzilla.gnome.org/show_bug.cgi?id=632977
Make sure property names passed to g_object_notify() are in the canonical form
(ie. "last-message" not "last_message"), so that g_param_spec_pool_lookup()
doesn't have to do strdup/canonicalize/free for every single notify call.
This only applies when building against older GLib versions (< 2.26).
Use more efficient g_object_notify_by_pspec() if we're compiling against
GLib >= 2.26, and also remove work-around for g_object_notify() thread-
safety issues with older GLib versions if it's not needed any more.
Use more efficient g_object_notify_by_pspec() if we're compiling against
GLib >= 2.26, and also remove work-around for g_object_notify() thread-
safety issues with older GLib versions if it's not needed any more.
Instead return after every iteration, which makes sure that the
stream lock is released for a short time after every iteration,
task state changes are checked, etc and this allows the task
to be stopped properly.
- Set reading_pos correctly in _create_read ()
- Seek to data if it is further than QUEUE_MAX_BYTES (queue) -
cur_level.bytes away. This should avoid a situation where the ring
buffer is full but the data offset from which we shall read is not in
the ring buffer.
- Only update the max_reading_pos to a lower value to protect data when
necessary
- Always signal an ADD in _locked_enqueue () so that an EOS unlocks the
reader
- More useful debug output
update_buffering () needs to be called every time we write to the ring
buffer so that applications don't get stuck waiting for a 100% buffered
message while queue2 is waiting for space
_create_write () must only be called for temp file/ring buffer cases
Cached data could have been overwritten so it is now protected until
it is read. Similarly data was overread as _have_data () was always
looking for the originally requested data even if part of it had been
read already.
Use cur_level.bytes to see how much space is free in the ringbuffer.
Simplyfy the write function, avoid taking subbuffers, move waiting for free
space in one spot, use simply counter to write data of a buffer.
- make _get_range () emit the del signal once a buffer has been read
- use do {} while (); for wait code as queue is locked and no data could
have been read in the mean time so it makes no sense to check before
waiting
- make _is_filled () more robust
Current range was being updated in the thread performing seek, but as
no locks were kept for a short section, data flow could resume before
current range updated, so data for the new range would be accepted as
from the previous range.
Rather, range should be updated in serialized manner based on
newsegment event.
Since everything GstXML related has been deprecated, we can now skip the
libxml includes from the public headers when GST_DISABLE_DEPRECATED is
defined.
See #463435.
Don't override the default get_times vmethod so that we can use the sync
property.
Set the default sync property to FALSE. It used to be set to TRUE but because
the get_times was NULL, it always behaved like FALSE.
Fixes#621530
Implement a custom acceptcaps function. We can simply check if there is an
intersection with the new caps. This makes the accept caps function much faster.
See #621190
When in download mode and we need to provide data for an offset that we don't
have, also perform a seek to the requested location when we are EOS. The reason
why we shouldn't wait for more data is because after EOS, there simply will be
no more data and we end up waiting forever.
Fixes#620500
Parse a size=value from the query string to specify a size. This is interesting
when reading from a file descriptor that actually has a size (and is not
stat-able, such as the socket of an http connection)
