FLUSH_STOP is meant to clear the flushing state of pads and elements
downstream, not to process data. Hence, a FLUSH_STOP should not
propagate sticky events. This is also consistent with how flushes are a
special case for probes.
Currently this is almost always the case, since a FLUSH_STOP is
__usually__ preceded by a FLUSH_START, and events (sticky or not) are
discarded while a pad has the FLUSHING flag active (set by FLUSH_START).
However, it is currently assumed that a FLUSH_STOP not preceded by a
FLUSH_START is correct behavior, and this will occur while autoplugging
pipelines are constructed. This leaves us with an unhandled edge case!
This patch explicitly disables sending sticky events when pushing a
FLUSH_STOP, instead of relying on the flushing flag of the pad, which
will break in the edge case of a FLUSH_STOP not preceded by a
FLUSH_START.
If sticky events are propagated in response to a FLUSH_STOP, the
flushing thread can end up deadlocked in blocking code of a downstream
pad, such as a blocking probe. Instead, those events should be
propagated from the streaming thread of the pad when handling a
non-flushing synchronized event or buffer.
This fixes a deadlock found in WebKit with playbin3 when seeks occur
before preroll, where the seeking thread ended up stuck in the blocking
probe of playsink:
https://github.com/WebPlatformForEmbedded/WPEWebKit/issues/1367
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7632>
H.266 NAL unit header syntax [1] is similar to H.265 NAL unit header syntax[2]:
```
H.265 H.266
+---------------+---------------+ +---------------+---------------+
|0|1|2|3|4|5|6|7|0|1|2|3|4|5|6|7| |0|1|2|3|4|5|6|7|0|1|2|3|4|5|6|7|
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|F| NALType | LayerId | TID | |F|U| LayerId | NALType | TID |
+-------------+-----------+-----+ +-------------+-----------------+
Where
* F: `forbidden_zero_bit`: f(1)
* U: `nuh_reserved_zero_bit`: u(1) only H.266
* LayerId: `nuh_layer_id`: u(6)
* NALType: `nal_unit_type`: u(6) in H.265 and u(5) in H.266
* TID: `nuh_temporal_id_plus1`: u(3)
```
NAL unit types have different values:
| NALType | H.265 | H.266 |
|----------|------------------------------------|---------------------------|
| VPS | HEVC_NAL_VPS(32) | VVC_VPS_NUT(14) |
| SPS | HEVC_NAL_SPS(33) | VVC_SPS_NUT(15) |
| PPS | HEVC_NAL_PPS(34) | VVC_PPS_NUT(16) |
| IRAP | BLA_W_LP(19)..HEVC_NAL_CRA_NUT(21) | IDR_W_RADL(7)..CRA_NUT(9) |
Implementation of `h266_video_type_find` is based on `h265_video_type_find` with
next differences:
- NAL unit header syntax for H.265 and H.266
- Diff NAL unit types values
- Avoid checking nuh_layer_id is zero. H.266 conformance test suite[3] contains examples with more than one layer.
This typefind was tested with H.266 conformance test suite [3]. Also, with the help of fluster[4],
with H.264 and H.265 conformance test suites to avoid regresions. Pending test vectors to fix:
- 8b422_H_Sony_4
- DEBLOCKING_E_Ericsson_3
[1] https://www.itu.int/rec/T-REC-H.266
[2] https://www.itu.int/rec/T-REC-H.265
[3] https://www.itu.int/wftp3/av-arch/jvet-site/bitstream_exchange/VVC/draft_conformance/draft6/
[4] https://github.com/fluendo/fluster/
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7339>
I wanted to check if an element had the SINK flag and realized it was
not displayed in gst-inspect.
The clock flags were already reported as part of the "clocking
capabilities" info but best to have them explicitly listed here as well.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7641>
In my tests with the new GCC 14 compiler for Cerbero, I got the
following error:
> In file included from include/directxmath/DirectXMath.h:2275,
> from ../gst-libs/gst/d3d11/gstd3d11converter.cpp:46:
> include/directxmath/DirectXMathMatrix.inl: In function 'bool
> DirectX::XMMatrixDecompose(XMVECTOR*, XMVECTOR*, XMVECTOR*, FXMMATRIX)':
> include/directxmath/DirectXMathMatrix.inl:1161:16:
> error: variable 'aa' set but not used [-Werror=unused-but-set-variable]
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7658>
Check and generate remote reception statistics from the info stored on
internal sources, as they are stored there when running against newer rtpbin
since MR !7424
This fixes cases where statistics are incomplete when
peers send RR reports from a single remote ssrc, which GStreamer does
when bundling is enabled and other RTP stacks may too.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7425>
In some cases, decodebin3 will send us incomplete caps (not containing
codec_data), and then a GAP event, which will force a negotiation.
This segfaults due to a null pointer deref because self->input_state
is NULL.
The only possible fix is to avoid negotiating when we get incomplete
caps (to avoid re-negotiationg immediately afterwards, which isn't
supported by some muxers), but also set as much input state as
possible so that a renegotiation triggered by a GAP event can complete
successfully.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7634>
Move RB info from receiver reports into the internal source that the RR
are about, and deprecate (but retain) the old mapping where each
external source has only a single RB entry in the rtp statistics.
The old method is broken if a remote peer uses a single ssrc to send
receiver reports for more than one of our internal sources, other
as multiple RB in a single packet, or alternate RB in different reports.
In each case only the most recent entry was kept, overwriting data for
other internal sources.
In multicast scenarios each internal source may receive multiple
receiver reports from different peers. To support that, all received
RR's are now stored into a hash table indexed by the sender's SSRC,
and all RRs are placed into an array when generating statistics, so
that the information from all peers is retrievable.
The current deficient behaviour (adding RB info into non-internal RTPSources) is
deprecated but kept in order to be backward compatible, and retained
that way in the generated statistics structure.
Refs
[1] https://tools.ietf.org/html/rfc3550#section-6.4.1
Based on a patch by Fede Claramonte <fclaramonte@twilio.com>
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7424>
This commit fixes two issues:
- The event must be posted *after* calling stop, otherwise a race condition can occur and the app never stops
- isFinishedLaunching and applicationDidFinishLaunching are not always synchronized, causing sometimes
a deadlock on the g_cond_wait never catching the g_cond_signal
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7593>
In order to ensure all initial events (stream-start, caps, ..) are present on
pads that we expose, those various sticky events are propagated (from parsebin
to multiqueue output, from multiqueue output to exposed pads).
The problem was that the "hack" in `urisourcebin` to inform downstream elements
that the stream is parsed data and a collection will be present was only done in
one place : a probe on the output of parsebin ... but the stream-start could
potentially have already been propagated to the output pads before that.
In order to fix that, we make sure any pending sticky stream-start event is
updated before being propagated.
Fixes#3788
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7598>
This new LCEVC encoder plugin is meant to implement all LCEVC encoder elements.
For now, it only implements the LCEVC H264 encoder (lcevch264enc) element. This
element essentially encodes raw video frames using a specific EIL plugin, and
outputs H264 frames with LCEVC data. Depending on the encoder properties, the
LCEVC data can be either part of the video stream as SEI NAL Units, or attached
to buffers as GstMeta.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7330>
This new element wraps both the base H264 decoder and lcevcdec elements into a
bin so that LCEVC decoding works with auto-plugging elements such as decodebin.
By default, the H264 decoder element with higher rank is used as base decoder,
but any particular H264 decoder can be used by manually setting the base-decoder
property.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7330>
This new LCEVC decoder plugin is meant to implement all LCEVC decoder elements.
For now, it only implements the LCEVC enhancement decoder (lcevcdec) element.
This element essentially enhances raw video frames using the LCEVC metadata
attached to input buffers into a higher resolution frame. The element is only
meant to be used after any base decoder (eg avdec_h264).
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7330>
There was an override to fake an IDR as soon as a SPS/PPS
is encountered, but that's not valid, at least an i-slice is needed.
Amend the visl result, as the output is slightly more correct, not
duplicating frame_num.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7330>
This improves the h264parse element to attach LCEVC enhancement data to buffers
using the new GstLcevcMeta API. This metadata will eventually be used downstream
by LCEVC decoders to enhance the RAW video frame.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7330>
This new metadata API allows elements to attach LCEVC enhancement data to video
buffers. Usually, the video parser elements are charged to parse the LCEVC
enhancement data from SEI Nal units (Supplemental enhancement Information).
However, other elements such as demuxers can also use this API if the LCEVC
enhancement data of the video is stored in a separate stream in the container.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7330>
Previously urisourcebin only allows stream-collections messages from adaptive
demuxers or sources to be posted.
This commit also allows the case where they come from a single parsebin. We
still want to prevent it in the case where they are multiple parsebins, since
that would require some form of aggregation to show a single/unified collection.
In order to avoid a regression with uridecodebin3 behavior, we also implement
support for GST_QUERY_SELECTABLE, so that uridecodebin3 can figure out whether
it should let GST_MESSAGE_STREAM_COLLECTION flow upwards (because app/user could
react on it) or whether it drops it in order for decodebin3 to do the collection
aggregation and posting.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7597>
The presence (or not) of a collection on an input will determine whether events
will be throttled so that there are only forwarded when that input gets a valid
collection.
Therefore the input lock should be used.
In addition to that, we want to ensure that the application/user has a chance to
reliably (i.e. synchronously) specify what streams it is interested in by
sending a GST_EVENT_SELECT_STREAMS.
But we cannot allow anything to go forward until that message posting has come
back, otherwise we run in various races.
Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/3872
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7594>
P010 uses 16 bits per pixel, with least significant being padding. This
code worked with Intel display driver since they roundup that value, but
does not work with the generic DRM helpers which also support NV15,
which does not have any padding.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7580>
Temporarily release the video decoder stream lock so that other
threads can continue decoding (e.g. call get_frame()) while data
is being pushed downstream.
At this point it is locked twice, we release one, and then the base class
releases the last one just before pushing the data.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7576>
This is an efficient string storage for short strings without heap allocations,
and falling back to the heap for bigger allocations. Almost all structure fields
and structure names in use nowadays are short enough to not require a heap
allocation.
As structure names and fields are sometimes dynamically created, storing them in
a GQuark can create a memory leak and potentially a DoS attack by continously
triggering creating of new quarks.
Thanks to Tim for coming up with the name!
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7432>
D3D12_HEAP_FLAG_CREATE_NOT_ZEROED flag was introduced as of
Windows 10 May 2020 Update, and older versions don't understand
the heap flag. Checks the feature support and enables the
D3D12_HEAP_FLAG_CREATE_NOT_ZEROED only if it's supported by OS
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7573>
The uvcsink was limited to only transfer YUY2 and MJPEG. For the
uncompressed formats there is no technical reason not to support them.
Since gst_video_format_to_string is already supporting more fourcc than
only YUY2 we use the default path in gst_v4l2uvc_fourcc_to_bare_struct
to create structures for more formats and bail out if the returned
format is not from the uncompressed type.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6037>
A zero-sized box is not really a problem and can be skipped to look at any
possibly following ones.
BMD ATEM devices specifically write a zero-sized bmdc box in the sample
description, followed by the avcC box in case of h264. Previously the avcC box
would simply not be read at all and the file would be unplayable.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7564>
This notably follow the way we order the template and keeps the
format:Interlaced caps at the end. This change also fixes
an early skip check, that would skip if a driver only supports
alternate interlacing for a specific format. It also fixes
a bug where only the last resolution of a discrete frame size
was allowed to use format:Interlaced. Finally, similar to template
caps code, simplify the caps for earch featurs, making the debug output
manageable and (marginally) improve negotiation speed.
This change will make it easier to introduce memory:DMABuf.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7540>
In qml6glsrc, we capture the application by copying the back buffer into
our own FBO. The afterRendering() signal is too soon as from the apitrace, the
application has been rendered into a QT internal buffer, to be used as a cache
for refresh.
Use afterFrameEnd() signal instead. This works with no delay on GLES. With GL
it seems to reduce from 2 to 1 frame delay (this may be platform specific). A
different recording technique would need to be used to completely remove this
delay.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7351>
