In VA-API 1.0 the union bits in VAEncMiscParameterBufferROI has
renamed one member from roi_value_is_qp_delat to
roi_value_is_qp_delta, which is the correct name.
In order to keep back compatibility a macro has added to access this
union member.
https://bugzilla.gnome.org/show_bug.cgi?id=784398
This function will query VAConfigAttribEncMaxRefFrames to get the
maximum number of reference frames supported in the driver.
This will be used for h264/h265 encoding.
https://bugzilla.gnome.org/show_bug.cgi?id=783803
There are some symbols that are not used when compiling with old
version of libva and those generates a compilation error.
Original-patch-by: Matt Staples <staples255@gmail.com>
Change the hard-coded range of quality-level from {1-8} to {1-7},
since it is the range Intel Open source driver supports.
Also perform the range clamping only if the user provided
quality-level is greater than the max-range suppored by the driver,
because there could be non-intel drivers giving lower value than
the hard-coded max value 7.
https://bugzilla.gnome.org/show_bug.cgi?id=783567
Just set the framerate parameter if the framerate numerator and
denominator are bigger than zero.
Otherwise, in Intel Gen6 driver, a warning is raised disabling the
bitrate control.
Original-patch-by: Hyunjun Ko <zzoon@igalia.com>
https://bugzilla.gnome.org/show_bug.cgi?id=783532
This is patch pretends to decouple the assignation of the values
in the parameter structures and the VA buffer's parameters setting.
It may lead to some issues since HRD, framerate or controlrate may
not be handled by the specific encoder, but they are set in
the VA buffer's parameters.
I leave as it because this patch is just a transitional patch.
https://bugzilla.gnome.org/show_bug.cgi?id=783449
Instead of using a proxy to story the buffer quality level, the
encoder now uses the native VA structure, which is copied to the
dynamically allocated VAEncMiscParameterBuffer.
This approach is computationally less expensive.
Right now, H264 and HEVC can set as a property the number of slices to
process. But each driver can set a maximum number of slices, depending
on the supported profile & entry point.
This patch verifies the current num_slices to process against the maximum
permitted by the driver and the media size.
https://bugzilla.gnome.org/show_bug.cgi?id=780955
Queries if the driver supports "Region of Interest" (ROI) during the config
creation.
This attribute conveys whether the driver supports region-of-interest (ROI)
encoding, based on user provided ROI rectangles. The attribute value is
partitioned into fields as defined in the VAConfigAttribValEncROI union.
If ROI encoding is supported, the ROI information is passed to the driver
using VAEncMiscParameterTypeROI.
https://bugzilla.gnome.org/show_bug.cgi?id=768248
Signed-off-by: Víctor Manuel Jáquez Leal <vjaquez@igalia.com>
This patch adds the handling of VAEncMiscParameterTypeQualityLevel,
in gstreamer-vaapi encoders:
The encoding quality could be set through this structure, if the
implementation supports multiple quality levels. The quality level set
through this structure is persistent over the entire coded sequence, or
until a new structure is being sent. The quality level range can be queried
through the VAConfigAttribEncQualityRange attribute. A lower value means
higher quality, and a value of 1 represents the highest quality. The quality
level setting is used as a trade-off between quality and speed/power
consumption, with higher quality corresponds to lower speed and higher power
consumption.
The quality level is set by the element's parameter "quality-level" with a
hard-coded range of 1 to 8.
Later, when the encoder is configured in run time, just before start
processing, the quality level is scaled to the codec range. If
VAConfigAttribEncQualityRange is not available in the used VA backend, then
the quality level is set to zero, which means "disabled".
All the available codecs now process this parameter if it is available.
https://bugzilla.gnome.org/show_bug.cgi?id=778733
Signed-off-by: Víctor Manuel Jáquez Leal <vjaquez@igalia.com>
When the function gst_vaapi_encoder_get_surface_formats() was added
it was under the assumption that any VA profile of the specific codec
supported the same format colors. But it is not, for example the
profiles that support 10bit formats.
In other words, different VA profiles of a same codec may support
different color formats in their upload surfaces.
In order to expose all the possible color formats, if no profile is
specified via source caps, or if the encoder doesn't have yet a
context, all the possible VA profiles for the specific codec are
iterated and their color formats are merged.
https://bugzilla.gnome.org/show_bug.cgi?id=771291
In order to get the supported surface formats within a specific
profile this patch adds the GstVaapiProfile as property to
gst_vaapi_encoder_get_surface_formats().
Currently the extracted formats are only those related with the
default profile of the element's codec.
https://bugzilla.gnome.org/show_bug.cgi?id=771291
Instead of creating (if it doesn't exist, yet) the encoder's context
the method gst_vaapi_encoder_get_surface_formats() now it creates
dummy contexts, unless the encoder has it already created.
The purpose of this is to avoid setting a encoder's context with a
wrong profile.
https://bugzilla.gnome.org/show_bug.cgi?id=771291
In order to generate vaapi contexts iterative, the function
init_context_info() is refactored to pass, as parameters the
GstVaapiContextInfo and the GstVaapiProfile.
https://bugzilla.gnome.org/show_bug.cgi?id=771291
Instead of initialize the chroma_type with a undefined value, which
will be converted to GST_VAAPI_CHROMA_TYPE_YUV420 by GstVaapiContext,
this patch queries the VA config, given the received
GstVaapiContextInfo's parameters, and gets the first response.
In order to get the GstVaapiChromaType value, also it was needed to
add a new utility function: to_GstVaapiChromaType(), which, given a
VA_RT_FORMAT_* will return the associated GstVaapiChromaType.
https://bugzilla.gnome.org/show_bug.cgi?id=771291
Currently, it set rate control information even when query fails.
In addition, it doesn't update any more since the flag
got_rate_control_mask is set to TRUE.
https://bugzilla.gnome.org/show_bug.cgi?id=779120
The encoder should be able to change its caps even it is already
processing a stream.
This is suppose to happen after a flush so the codedbuf_queue should
be empty.
https://bugzilla.gnome.org/show_bug.cgi?id=775490
This method will return the valid surface formats in the current
config. If the are no VAConfig it is created with the information
available.
https://bugzilla.gnome.org/show_bug.cgi?id=769266
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
Split set_context_info() adding init_context_info() which only
initialises the GstVaapiContextInfo structure inside GstVaapiEncoder
required for VAConfig.
https://bugzilla.gnome.org/show_bug.cgi?id=769266
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
Added a new property "low-power-enc" for enabling low power
encoding mode. Certain encoding tools may not be available
with the VAEntrypointEncSliceLP.
https://bugzilla.gnome.org/show_bug.cgi?id=766050
Before, only YUV420 color space where supported. With this patch, the
encoder is queried to know the supported formats and admits YUV422
color space if its available.
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=744042
Framerate 0/1 is valid, and it is particularly useful for picture
encoding, such as jpeg. This patch makes the encoder to admit that
framerate.
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=744042
Practically we should be able to support more formats, for eg:
JPEG Encoder can support YUV422, RGBA and all.
But this is causing more issues which need proper fix here and there.
Add gst_vaapi_get_config_attribute() helper function that takes a
GstVaapiDisplay and the rest of the arguments with VA types. The aim
is to have thread-safe VA helpers by default.
Make sure to configure the encoder with the set of packed headers we
intend to generate and submit. i.e. make selection of packed headers
to submit more robust.
Cache the first compatible GstVaapiProfile found if the encoder is not
configured yet. Next, factor out the code to check for the supported
rate-control modes by moving out vaGetConfigAttributes() to a separate
function, while also making sure that the attribute type is actually
supported by the encoder.
Also fix the default set of supported rate control modes to not the
"none" variant. It's totally useless to expose it at this point.
Introduce GstVaapiContextUsage so that to explicitly determine the
usage of a VA context. This is useful in view to simplifying the
creation of VA context for VPP too.
Improve documentation and debug messages. Clean-up APIs, i.e. strip
them down to the minimal set of interfaces. They are private, so no
need expose getters for instance.
Make sure to submit the packed headers only if the underlying VA driver
requires those. Currently, only handle packed sequence and picture
headers.
https://bugzilla.gnome.org/show_bug.cgi?id=722737
Various clean-ups to improve consistency and readability: rename some
variables, drop unused macro definitions, drop initialization of vars
that are zero-initialized from the base class, drop un-necessary casts,
allocate GPtrArrays with a destroy function.
Add encoder "tune" option to override the default behaviour that is to
favor maximum decoder compatibility at the expense of lower compression
ratios.
Expected tuning options to be developed are:
- "high-compression": improve compression, target best-in-class decoders;
- "low-latency": tune for low-latency decoding;
- "low-power": tune for encoding in low power / resources conditions.
Only expose the exact static set of supported rate-control properties
to the upper layer. For instance, if the GstVaapiEncoderXXX class does
only support CQP rate control, then only add it the the exposed enum
type.
Add helper macros and functions to build a GType for an enum subset.
Add gst_vaapi_encoder_set_keyframe_period() interface to allow the
user control the maximum distance between two keyframes. This new
property can only be set prior to gst_vaapi_encoder_set_codec_state().
A value of zero for "keyframe-period" gets it re-evaluated to the
actual framerate during encoder reconfiguration.
Improve codec reconfiguration to be performed only through a single
function. That is, remove the _set_context_info() hook as subclass
should not alter the parent GstVaapiContextInfo itself. Besides, the
VA context is constructed only at the final stages of reconfigure().
Add interface to communicate the encoder resolution and related info
like framerate, interlaced vs. progressive, etc. This new interface
supersedes gst_vaapi_encoder_set_format() and doesn't use any GstCaps
but rather use GstVideoCodecState.
Note that gst_vaapi_encoder_set_codec_state() is also a synchronization
point for codec config. This means that the encoder is reconfigured
there to match the latest properties.
Add interface to communicate configurable properties to the encoder.
This covers both the common ones (rate-control, bitrate), and the
codec specific properties.
https://bugzilla.gnome.org/show_bug.cgi?id=719529
Add gst_vaapi_encoder_set_bitrate() interface to allow the user control
the bitrate for encoding. Currently, changing this parameter is only
valid before the first frame is encoded. Should the value be modified
afterwards, then GST_VAAPI_ENCODER_STATUS_ERROR_OPERATION_FAILED is
returned.
https://bugzilla.gnome.org/show_bug.cgi?id=719529
Add gst_vaapi_encoder_set_rate_control() interface to request a new
rate control mode for encoding. Changing the rate control mode is
only valid prior to encoding the very first frame. Afterwards, an
error ("operation-failed") is issued.
https://bugzilla.gnome.org/show_bug.cgi?id=719529
Fix coded buffer size for each codec. A generic issue was that the
number of macroblocks was incorrectly computed. The second issue was
specific to MPEG-2 were the max number of bits per macroblock, and
as defined by the standard, was incorrectly mapped to the (lower)
H.264 requirement. i.e. 4608 bits vs. 3200 bits limit.
Change get_context_info() into a set_context_info() function that
initializes common defaults into the base class, thus allowing the
subclasses to specialize the context info further on.
The set_context_info() hook is also the location where additional
context specific data could be initialized. At this point, we are
guaranteed to have valid video resolution size and framerate. i.e.
gst_vaapi_encoder_set_format() was called beforehand.
Clean public APIs up so that to better align with the decoder APIs.
Most importantly, gst_vaapi_encoder_get_buffer() is changed to only
return the VA coded buffer proxy. Also provide useful documentation
for the public APIs.
Kill GstVaapiEncoderSyncPic objects that are internally and temporarily
allocated. Rather, associate a GstVaapiEncPicture to a coded buffer
through GstVaapiCodedBufferProxy user-data facility.
Besides, use a GAsyncQueue to maintain a thread-safe queue object of
coded buffers.
Partial fix for the following report:
https://bugzilla.gnome.org/show_bug.cgi?id=719530
Fix the GstVaapiEncoderClass parent class type. Make sure to validate
subclass hooks as early as possible, i.e. in gst_vaapi_encoder_init(),
thus avoiding useless run-time checks. Also simplify the subclass
initialization process to be less error prone.
Refactor the GstVaapiCodedBuffer APIs so that to more clearly separate
public and private interfaces. Besides, the map/unmap APIs should not
be exposed as is but appropriate accessors should be provided instead.
* GstVaapiCodedBuffer: VA coded buffer abstraction
- gst_vaapi_coded_buffer_get_size(): get coded buffer size.
- gst_vaapi_coded_buffer_copy_into(): copy coded buffer into GstBuffer
* GstVaapiCodedBufferPool: pool of VA coded buffer objects
- gst_vaapi_coded_buffer_pool_new(): create a pool of coded buffers of
the specified max size, and bound to the supplied encoder
* GstVaapiCodedBufferProxy: pool-allocated VA coded buffer object proxy
- gst_vaapi_coded_buffer_proxy_new_from_pool(): create coded buf from pool
- gst_vaapi_coded_buffer_proxy_get_buffer(): get underlying coded buffer
- gst_vaapi_coded_buffer_proxy_get_buffer_size(): get coded buffer size
Rationale: more optimized transfer functions might be provided in the
future, thus rendering the map/unmap mechanism obsolete or sub-optimal.
https://bugzilla.gnome.org/show_bug.cgi?id=719775
Add initial API for video encoding: only basic interfaces and small
encoder objects are implemented so far.
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
