The internal clock is only used for slaving against the remote clock, while
the user-facing GstClock can be additionally slaved to another clock if
desired. By default, if no master clock is set, this has exactly the same
behaviour as before. If a master clock is set (which was not allowed before),
the user-facing clock is reporting the remote clock as internal time and
slaves this to the master clock.
This also removes the weirdness that the internal time of the netclientclock
was always the system clock time, and not the remote clock time.
https://bugzilla.gnome.org/show_bug.cgi?id=750574
This uses all of the netclientclock code, except for the generation and
parsing of packets. Unfortunately some code duplication was necessary
because GstNetTimePacket is public API and couldn't be extended easily
to support NTPv4 packets without breaking API/ABI.
We extend our calculations to work with local send time, remote receive time,
remote send time and local receive time. For the netclientclock protocol,
remote receive and send time are assumed to be the same value.
For the results, this modified calculation makes absolutely no difference
unless the two remote times are different.
This improves accuracy on wifi or similar networks, where the RTT can go very
high up for a single observation every now and then. Without filtering them
away completely, they would still still modify the average RTT, and thus all
clock estimations.
Just create the cancellable fd once and keep it around instead
of creating/closing it for every single packet. Since we spend
most time waiting for packets, an fd is alloced and in use pretty
much all the time anyway.
Add a hold off when the clock calibration suddenly loses synch,
as it may be a glitch, but also make sure we update if it stays
desynched for more than a few seconds
Add the minimum-update-interval property to the clock, with a default
of 50ms and don't send polling requests faster than that. That helps to
ensure we spread the initial observations out a little - startup takes
a little longer, but tracking is more stable.
Move the discont skew limiting code inside an if statement, so that
it's only done when the linear regression succeeds and the clock
parameters might actually change.
Allow setting a GstBus on the network clock client
via a new 'bus' object property. If a bus is set, the
clock will output an element message containing statistics
about new clock observations and the clock correlation.
When the local clock is synchronised with the remote, limit the
maximum jump in the clock at any point to be one average RTT to
the server. Also, publish in the bus message whether we are
synched with the remote or not.
They are very confusing for people, and more often than not
also just not very accurate. Seeing 'last reviewed: 2005' in
your docs is not very confidence-inspiring. Let's just remove
those comments.
Fix a typo in a doc string - the property is round-trip-limit, not
roundtrip-limit.
Remove a bogus GST_WARNING that can print an uninitialised variable
and is redundant anyway.
Sometimes, packets might take a very long time to return. Such packets
usually are way too late and destabilize the regression with their
obsolete data. On Wi-Fi, round-trips of over 7 seconds have been observed.
If the limit is set to a nonzero value, packets with a round-trip period
larger than the limit are ignored.
Signed-off-by: Carlos Rafael Giani <dv@pseudoterminal.org>
https://bugzilla.gnome.org/show_bug.cgi?id=712385
Keep a rolling average of the round trip time for network clock
observations, favouring shorter round trips as being more accurate.
Don't pass any clock observation to the clock slaving if it has a
round-trip time greater than 2 times the average.
Actual shifts in the network topology will be noticed after some
time, as the rolling average incorporates the new round trip times.
Even though this parameter is not used, it should be const to fit in with the
coding standards for other similar parameters. Client code already passes in
const strings under the expectation that they won’t be modified.
https://bugzilla.gnome.org/show_bug.cgi?id=710442
No need to use a custom main context and custom timeout sources,
just use g_socket_condition_timed_wait() instead, which was added
for exactly this case.
Also seems to help with the unit test deadlocking with glib 2.33.x
https://bugzilla.gnome.org/show_bug.cgi?id=681575
Original commit message from CVS:
Patch by: Ole André Vadla Ravnås
<ole dot andre dot ravnas at tandberg dot com>
* docs/gst/gstreamer-sections.txt:
* gst/gstpoll.c: (find_index), (gst_poll_free_winsock_event),
(gst_poll_update_winsock_event_mask), (gst_poll_new),
(gst_poll_free), (gst_poll_fd_init), (gst_poll_add_fd_unlocked),
(gst_poll_remove_fd), (gst_poll_fd_ctl_write),
(gst_poll_fd_ctl_read_unlocked), (gst_poll_fd_has_closed),
(gst_poll_fd_has_error), (gst_poll_fd_can_read_unlocked),
(gst_poll_fd_can_write), (gst_poll_wait),
(gst_poll_set_controllable), (gst_poll_restart),
(gst_poll_set_flushing):
* gst/gstpoll.h:
* libs/gst/net/gstnetclientclock.c: (gst_net_client_clock_new):
* libs/gst/net/gstnettimeprovider.c: (gst_net_time_provider_start),
(gst_net_time_provider_new):
* plugins/elements/gstfdsink.c: (gst_fd_sink_start):
* plugins/elements/gstfdsrc.c: (gst_fd_src_start):
* tests/benchmarks/gstpollstress.c: (main):
* tests/check/gst/gstpoll.c: (GST_START_TEST), (gst_poll_suite):
Remove GstPollMode from the API, it does not make sense to let the
application control this.
Add support for Win32.
Fix the testsuite. Fixes#520671.
Original commit message from CVS:
Patch by: Ole André Vadla Ravnås <ole.andre.ravnas@tandberg.com>
* gst/gsttrace.c:
* libs/gst/net/gstnetclientclock.c: (gst_net_client_clock_new):
* libs/gst/net/gstnettimepacket.c: (gst_net_time_packet_send):
* libs/gst/net/gstnettimeprovider.c: (gst_net_time_provider_new):
Fix a couple of missing includes for MSVC2005 and a C99 issue. Also,
starting with 2.14.0, GLib won't provide a pipe() macro any longer,
so use _pipe() directly (#492077).
* win32/common/dirent.c: (_treaddir):
Add a couple of casts to make it build without warnings with MSVC.
* win32/common/libgstreamer.def:
Add some more symbols that need to be exported.
Original commit message from CVS:
2006-10-09 Zaheer Abbas Merali <zaheerabbas at merali dot org>
* libs/gst/net/gstnetclientclock.c: (gst_net_client_clock_thread):
Remove local debugging system and use Gstreamer's instead.
Original commit message from CVS:
2006-10-09 Zaheer Abbas Merali <zaheerabbas at merali dot org>
Patch by: Josep Torre Valles <josep@fluendo.com>
* common/m4/gst-error.m4:
Disable warning of statement not reached on Forte.
* gst/gstmessage.h:
Fix warning on Forte (value doesn't fit on enumeration).
* libs/gst/base/gstbasesink.c: (gst_base_sink_chain_unlocked):
Fix warning on Forte (value doesn't fit on enumeration).
* libs/gst/net/gstnetclientclock.c: (gst_net_client_clock_thread):
DEBUG macro says it takes minimum of 2 args and so Forte
complains about the use with just 1 arg.
* plugins/elements/gstfdsink.c:
* plugins/elements/gstfdsrc.c:
* plugins/elements/gstfilesink.c:
* plugins/elements/gstfilesrc.c:
Use correct return type for the uri handler implementations.
All these fix warnings in Forte. Fixes bug #360860.
Original commit message from CVS:
* gst/gstinfo.c:
Promote GST_DEBUG_CATEGORY_STATIC in example in docs.
* libs/gst/net/gstnetclientclock.c:
* libs/gst/net/gstnettimeprovider.c:
Use GST_DEBUG_CATEGORY_STATIC here too (#342503).
