../subprojects/gst-plugins-bad/tests/check/libs/gstlibscpp.cc:41:
fatal error: gst/mpegts/gstmpegts-enumtypes.h: No such file or directory
Could only pass the needed deps to the libscpp test, but gets
messier to maintain, so let's at it for consistency.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6644>
Since https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6153 ,
subtitle "decoders" (i.e. which decode to raw text) are no longer auto-plugged
by parsebin.
But if a given format does not have a parser at all, we would end up outputting
non-time/non-parsed outputs.
In order to mitigate the issue, until such parsers are available, we check if
the subtitle stream is in TIME format or not (i.e. whether it comes from a
parser or demuxer). If not, we attempt to plug in a subtitle "decoder".
Fixes#3463
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6597>
* RED_OR_ALPHA8 will map value to alpha for OpenGL, use R8 to avoid
2nd shader
* Determine texel size for proper texture memory preparation
* QByteArray::fromRawData() does shallow copy and thus leads to use of
corrupted memory
* Make sure RGBA dummy texture is fully opaque
* QRhiTexture::create() must be called to allocate texture resources
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6581>
During RTP-Info synchronization, clock_base was temporarily switched
from the actual clock-base to the base RTP time and then back some lines
later.
Instead directly work with the base RTP time. The comment about using a
signed variable for convenience doesn't make any sense because all
calculations done with the value are unsigned.
Similarly, rtp_clock_base was overridden with the rtp_delta when
calculating it, which was fine because it is not used anymore
afterwards. Instead, introduce a new variable `rtp_delta` to make this
calculation clearer.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6575>
It's not in the same period as the current RTP base time but always in
the very first period. This avoids using it again at a much later time.
The code in question is only triggered with rtcp-sync=rtp-info.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6575>
It is compared to other extended RTP timestamps all over rtpjitterbuffer
and since 4df3da3bab the initial extended RTP timestamp is not equal
anymore to the plain RTP time.
Continue passing a non-extended RTP timestamp via the `sync` signal for
backwards compatibility. It will always be a timestamp inside the first
extended timestamp period anyway.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6575>
When the buffer DTS is estimated based on arrival time at the
jitterbuffer (rather than provided on the incoming buffer itself),
it shouldn't be used for skew adjustment. The typical case is
packets being deinterleaved from a tunnelled TCP/HTTP RTSP stream,
and the arrival times at the jitter buffer are not well enough
correlated to usefully do skew adjustments.
This restores the original intended behaviour for the 'estimated dts'
path, that was broken years ago during other jitterbuffer refactoring.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6561>
For some cameras `gst_jpeg_parse_app0()` fails on a invalid segment.
While this is likely a driver or firmware bug that should be addressed
accordingly, it's not fatal and likely does not deserve a bus message on
every frame, flooding journals.
Turn down the volume of the warnings by turning them into object
warnings. If we conclude that in some cases we'd still want bus
warnings, they can be done more fine-grained in the
`gst_jpeg_parse_appX()` functions.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6539>
If parameters remain similar enough to avoid either encoder reopening
or downstream renegotiation, avoid it.
This is going to be useful for dynamic parameters setting.
To check if the stream parameters changed, so the internal encoder has
to be closed and opened again, are required two steps:
1. If input caps, format, profile, chroma or rate control mode have changed.
2. If any of the calculated variables and element properties have changed.
Later on, only if the output caps also changed, the pipeline
is renegotiated.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6519>
The last frame which has the smallest diff should be consider as
the first choice rather than the golden frame. Especially when only
one reference available, this way can improve the BD rate about 5
percentage.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6507>
It might happen that the key event arrives when the d3d11videosink
is stopping. In case of GstD3D11WindowWin32 it can raise a
navigation event even when the sink is already freed, because the
window object's refcount may reach 0 in the window thread. In
other words sometimes the GstD3D11WindowWin32 lives few ms more
then the GstD3D11VideoSink, because it's freed asynchronously.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6492>
The attempt to free the domain data is happeing twice during the ptp deinit.
Once while iterating through the list domain_data and second while iterating
through the list domain_clocks, so this is crashing the application
trying to gst_ptp_deinit
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6457>
And handle the case of a NULL buffer being returned cleanly, which is
valid as long as a buffer list is returned instead. Previously this
would cause an assertion because of calling gst_buffer_unref() with
NULL.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6463>
If we can calculate timestamps for buffers, then set the duration
on outgoing buffers based on the number of samples depayloaded.
This can fix the muxing to mp4, where otherwise the last packet
in a muxed file will have 0 duration in the mp4 file.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6456>
Calling gst_pad_peer_query_caps() without a filter can give us EMPTY caps, whereas all the code below
assumes that's not the case. Replacing query+intersect with a filtered query ensures we always get a subset
of the template caps back.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6454>
Some driver doesn't implement enum_framesize. The maximum supported
size can be got by trying format with a very large size. Also need
to set max_width/max_height for this case, otherwise default encoded
buffer size 256kB is too small.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6430>
The --atleast-version implies --exists, but the implementation in
earlier commits had the version check applied any time the --exists was
checked, and the default value of the major and minor versions were set
to the GStreamer major and minor versions. The resulting behavior would
have gst-inspect return '1' if the plugin's version didn't match
gstreamer's even when --atleast-version was not specified in the command
line args. The change in this patch removes that behavior and adds
tests to verify that if --exists is specified WITHOUT --atleast-version
the version check will NOT be applied. If both arguments are specified
and the version does not match the arg-supplied version number, a new
return code of '2' is used to uniquely identify the failure.
Fixes#3246
Signed-off-by: Thomas Goodwin <thomas.goodwin@laerdal.com>
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6414>
In an early non-linked scenario, this was causing a ton of criticals about the queue array,
because the output callback would still fire for leftover frames that were still being processed by VT
at the time the output loop stopped. This makes sure they're flushed correctly as well.
Also renames gst_vtdec_loop to gst_vtdec_output_loop for consistency with related functions.
wip
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6411>
Sometimes a call to negotiate (and thus drain) can happen from the output loop
(via finish_frame()), which will tell VT to output all internal frames, but that won't succeed
if we happen to decide to wait for the queue to empty (because the loop is waiting for draining to finish and
will not make space in the queue!). This commit adds an override for the queue size limit if we're draining/flushing.
This bug could happen for any formats, but was especially obvious for ProRes, which has dpb_size of 0.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6411>
