Syncrhonizing buffer commits to the streaming thread can lead to
dropped frames when frame callbacks are not processed before the
next frame is ready for rendering. Depending on the drift between
the wayland compositor and buffer source timings, this can lead to
periods of significant frame drop, especially when the media frame
rate is close to the display frame rate.
Cache buffers in the streaming thread and peform commits on the
display thread to eliminate the buffer commit racing.
The implementation is the same for both waylandsink and gtkwaylandsink,
so move it to the common wayland library under gst-lib.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6133>
Add synchonized versions of wl_display_sync() and wl_callback_destroy()
that will ensure that to callbacks can be managed in a thread safe way
on the display queue even when they are dispatched from a separate
thread.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6133>
This inherits from the same rule as gst_buffer_add_meta
```
gst-mpegtspesmetadatameta.h:98: Warning: GstMpegts:
gst_buffer_add_mpegts_pes_metadata_meta: return value: Invalid non-constant
return of bare structure or union; register as boxed type or (skip)
```
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6146>
MaxDpbSize specified in A.4.2 tells upper bound of decoded picture
buffer size but does not tell actual required size.
Use max_dec_pic_buffering value as a dpb size. Some backends
such as DXVA and NVDEC might require pre-allocated DPB buffer
and unnecessary large DPB size will result in waste of GPU memory.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6101>
- gst_analytics_cls_mtd_get_length() return a gsize, this type dicated index
type for gst_analytics_cls_mtd_get_quark() and
gst_analytics_cls_mtd_get_level().
- Minor cleanup/improvement on index validation.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6018>
A client may map dmabufs without the intention to either read or write
to the memory. One example is clients wanting to use the
`gst_video_frame_map()` helper function.
Thus, in order to make buffers from `GstVaDmabufAllocator` conveniently
usable, ignore the modifier check if the client specified neither
`GST_MAP_READ` nor `GST_MAP_WRITE`.
Also skip the `va_sync_surface()` call in that case, as it's likely only
needed for CPU reads/writes.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5965>
clang does not like the array index assignment without the `=` sign in
it. This is a gnu extension I believe, and adding the sign is proper.
This fixes the following two warnings:
```
../subprojects/gst-plugins-bad/gst-libs/gst/vulkan/gstvkvideo-private.c:32:40:
warning: use of GNU 'missing =' extension in designator [-Wgnu-designator]
[GST_VK_VIDEO_EXTENSION_DECODE_H264] {
^
=
../subprojects/gst-plugins-bad/gst-libs/gst/vulkan/gstvkvideo-private.c:36:40:
warning: use of GNU 'missing =' extension in designator [-Wgnu-designator]
[GST_VK_VIDEO_EXTENSION_DECODE_H265] {
^
=
```
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5996>
This protocol does what it says on the box, avoiding the need for a 1x1
wl_shm buffer.
A wayland-projects wrap has been added for users who do not have v1.26
available.
This commit was partly authored by Robert Mader.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2662>
The pool currently defaults to performing a layout transition to
VK_IMAGE_LAYOUT_TRANSFER_DST_OPTIMAL, with some special exceptions for
video usages. This may not be a legal transition depending on the usage.
Provide an API to explicitly control the initial image layout.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5881>
Since the AV1 specification is not explicitly mentioning about
the array size bounds, array sizes in scalability structure
should be defined as possible maximum sizes that can have.
Also, this commit removes GST_AV1_MAX_SPATIAL_LAYERS define from
public header which is API break but the define is misleading
and this patch is introducing ABI break already
ZDI-CAN-22300
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5823>
- AU boundary detection reviewed to follow more closely H.264 spec. and more
specifically clauses 7.4.1.2.3 and 7.4.1.2.4.
- The gist of the changes is a look-a-head in then next AU required identify the
last vcl-nal of current AU and firt vcl-nal of next AU (according to
7.4.1.2.4) followed by the identification of the first nal of next AU
(according to 7.4.1.2.3).
- A backlog of all nals of current AU and next AU up to the point where current
AU can identified completed is kept.
- In NAL alignement mode vcl-nal are sent immediatly but the history is kept to
allow AU boundary detection. Non-vcl-nal can be delayed up to the reception of
the next vcl-nal to allow a correct AUD insertion.
- Based on this improved AU boudary detection we can avoid erronous AUD
insertion, like the one highlighted by test
test_parse_sliced_with_prefix_and_sei_nal_au.
- Add support for MVC AU boundary detection. (H.7.4.1.2.4)
- Explicitly report SVC not supported. We don't have the SVC NAL parsing
required to identify boundary. (missing dependency_id and quality_id fields
from SVC, see G.7.4.1.2.4)
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5741>
VA drivers allocate surfaces given their properties, so there's no need to
provide a buffer size to the VA pool.
Though, the buffer size is provided by the driver, or the canonical size
is used for single planed surfaces.
This patch removes the need to provide a size for the function
gst_va_pool_new_with_config() and adds a helper method to retrieve the surface
size, gst_va_pool_get_buffer_size(). Also change the callers accordingly.
Changes for custom VA pool creation will be addressed in the following commits.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5805>
The original idea was to select the type of mapping (either using derive images
or downloading the image) in runtime, under the assumption that both methods
shared the same memory layout (offsets and strides), because a single
GstVideoMeta is assigned by the buffer pool at allocation time. Nonetheless, in
recent hardware this assumption is invalid, raising memory access errors.
This patch removes completely the mapping type selection at runtime, using the
method selected when the allocator is configured, synced with the bufferpool
allocation.
This problem was fixed originally for iHD driver only. But now it makes sense to
remove all of it.
Original-patch-by: Mengkejiergeli Ba <mengkejiergeli.ba@intel.com>
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5760>
When exporting a DMABuf from a VASurface the user might tell that the surface
was allocated with certain fourcc, but the returned VADRMPRIMESurfaceDescriptor
migth tell a different fourcc, as in the case or radeonsi driver, for duplicated
fourcc, such as YUY2 and YUYV.
Originally it was supposed to be a failed exportation. This patch relax this
validation by allowing different fourcc.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5760>
Clip tile rows and cols to 64 as describe in AV1 specification
to avoid writing outside array range but preserve sb_cols
and sb_rows value which are used to futher computation.
Fixes ZDI-CAN-22226 / CVE-2023-44429
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5702>
Direct3D feature level 10 supported GPUs were released
more than 15 years ago, around the time when Windows
Vista / 7 were released. Also our d3d11 plugin/library
does not support feature level 9.x very well already.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5709>
- GstAnalyticRelationMeta is a base class for analytics
meta. It's able to store analytics results (GstAnalyticRelatableMtd)
and describe the relation between each analysis results.
- GstAnalysisRelationMeta also contain an algorithm able to explore
analysis results relation using a bfs.
- Relation(edge) between analysis results (vertice) are stored in an adjacency-matrix
that allow to quickly identify if two analysis results are related and by
which relation they related. It also work for indirect relation
and can provide the path of analysis results by which two
analysis results are related.
- One allocation per buffer to store analysis results. Here we rely on
the application to guess how much space will be required to store all
analysis results. This is something that could be improved
significantly but it's a starting point.
- Define common analysis results, classification, object-detection,
tracking that are subclass of GstAnalyticRelatableMtd. The also
provide exemple of how to extend GstAnalyticRelatableMtd to have them
benefit for the mechanim to express relation with other analysis
results.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4962>
During the video session memory allocation, the property flags can
be different from the expected ones, so do not expect all the
property flags and test it with G_MAXUINT32
It's failing with driver 525.47.26 and NVidia HW NVIDIA GeForce
RTX 3050 and 2060
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4850>
This is how it was documented and how it worked before the port to GstPlay.
Without this, applications expecting signals to be emitted directly
without anything running the main context will simply not receive any
signals.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5672>
This commit corrects the mapping relationship between RGB and BGR in GST and DRM.
The previous mapping was incorrect, causing potential color mismatches in the output.
The changes are as follows:
{WL_SHM_FORMAT_RGB888, DRM_FORMAT_RGB888, GST_VIDEO_FORMAT_BGR},
{WL_SHM_FORMAT_BGR888, DRM_FORMAT_BGR888, GST_VIDEO_FORMAT_RGB},
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5620>
Instead of guessing the DRM format and modifier, pass a DRM video info to
gst_va_dmabuf_memories_setup().
Still, it checks for the DRM parameters in DRM info, if they are not available,
as in the case of V4L2 buffers, the part of the video info is used.
This is an API breakage, but since the plugin is still in stage, it's still
allowed.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5264>
To import DMAbufs we used VASurfaceAttribExternalBuffers which works, but it's
not specific for DRM PRIME 2, since it lacks of many metadata. This patch
replaces VASurfaceAttribExternalBuffers with VADRMPRIMESurfaceDescriptor in
va_create_surfaces().
Still, this patch assumes linear modifier only.
The hack for RGB surfaces in I965 driver was pushed down into
va_create_surfaces() to avoid handling both structures.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5264>
Now that nvidia-vaapi-driver appeared and isn't yet supported by GstVA, we've to
add an allowed list of supported drivers.
This patch implements it adding a environment variable to disable this driver
check: GST_VA_ALL_DRIVERS
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5616>
Suppose you have a project where GStreamer and wayland-protocols are
pulled in as dependencies via .wrap files. In that case, Meson's setup
step will fail for gst-plugins-bad with the message "Sandbox violation:
Tried to grab file viewporter.xml outside current (sub)project." To
avoid this exception, one should use Meson's `files` and `join_paths`
functions. The suggested solution is identical to how GTK 4 processes
Wayland files.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5593>
When hotdoc documentation is enabled and opencv plugin is set as
auto-detected, but the library isn't installed, meson configuration fails
with this message:
../subprojects/gst-plugins-bad/docs/meson.build:139:21: ERROR: Unknown variable "gstopencv_dep".
This patch fixes this case defined gstopencv_dep as disabler() when
dependencies aren't found.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5560>
Current codes try derive image in _update_image_info first, if
derive returns no error, the va_allocator->info is the one from derived
image, but in va_map_unlocked, we disable derive manner for d3d backend
because it doesn't seem to work, this will cause issue for d3d path,
i.e. possibly using derived info in va_get_image to do mapping...
This patch disables derive image for d3d backend in _update_image_info,
to ensure we only use info from va_create_image for d3d path.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5495>
An operation is an arbitrary amount of work to be executed on the host, a
device, or an external entity such as a presentation engine.
The purpose of this object is to help on the operation's synchronization
through declaring explicit execution dependencies, and memory dependencies
between two sets of operations defined by the command’s two synchronization
scopes.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5079>
While VkPipelineStageFlags is an enum (arguably backed as uint32 in 32bit
platforms), VkPipelineStageFlags2 is a redefinition of guint64; likewise for
VkAccessFlags and VkAccessFlags2.
This patch types both members in GstVulkanBarrierMemoryInfo as guint64 for
compatibility, so it could be used with or without synchronization2 vulkan
extension.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5079>
Previously we were checking for opencv dep in 2 different places,
and the checks would vary in terms of how complex and exhaustive
they were.
Move the check into the libs module and reuse the result later on.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3016>
This field is used to store gbooleans (which are ints) but if it's
a :1 bit depth assigning ints to it changes it's value as the only
valid values are -1 and 0.
Make it a guint instead so the cast would be correct.
```
../subprojects/gst-plugins-bad/gst-libs/gst/vulkan/xcb/gstvkwindow_xcb.c:151:25: error:
implicit truncation from 'int' to a one-bit wide bit-field changes value from 1 to -1
[-Werror,-Wsingle-bit-bitfield-constant-conversion]
window_xcb->visible = TRUE;
```
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5432>
The v4l2codecs H.265 decoder uses the
GstH265SliceHdr::entry_point_offset_minus1 array so make sure that it is not
freed before decoding the frame.
Before this patch, some H.265 input would segfault in
gst_v4l2_codec_h265_dec_fill_slice_params() when executing the line:
guint32 entry_point_offset = slice_hdr->entry_point_offset_minus1[i] + 1;
Make sure that the array is not freed before using it.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5499>
Don't update info's size with the VA image reported data size for single plane
images, since drivers might allocate bigger space than the strictly required to
store the image, but when we dump the buffer as is (using filesink, for example)
the produced stream is corrupted. For multi-plane images video meta is required
to read/write them.
We updated info's size because gstreamer-vaapi did it too, but the reason to
update it there was for uploading and rendering surfaces (commit c698a015).
Furthermore, this patch adds an error message if the allocated data size for the
image by the driver is lesser than the expected because it would be a buggy
driver.
Fixes: #2959
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5308>
Even if the segmentation feature value is not updated,
the parsed "segmentation_update_map" and "segmentation_temporal_update"
values should not be cleared as it's referenced during lower
level bitstream parsing. Also, don't use assert() in parser
unless it's clearly impossible condition.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5334>
If DPB is full already, GstH265Decoder::new_picture() might fail if
subclass uses fixed size picture pool and its size is equal to the DPB
size. Call the new_picture() after DPB is cleared in gst_h265_decoder_dpb_init()
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5333>
It is similar to NV12 but has 10bits per channel instead of 8.
As it is supported by many modern GPUs, VA-API and an increasing
number of Wayland compositors, let's support it as well.
Also bump the required libdrm version accordingly and add a temporary
define for the WL_SHM format.
Tested with Weston, Mutter and Sway.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5275>
Old versions of mesa doesn't support VASurfaceAttribDRMFormatModifiers. To
solve it, by just ignoring the modifiers assuming that linear is accepted and
produced, the creation of frames will be tried again without that attribute.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5256>
Setting the surface source rectangle has been omitted so far. As a side effect
surface created with padded width/height are being scaled down. Fix this using
the viewporter source rectangle configuration. This can later be enhanced
to support crop meta.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5259>
Section 3.4 in RFC8835 states that if a WebRTC endpoint uses an HTTP
proxy to access the Internet it MUST include the "ALPN" header. This
commit adds this header.
By default the ALPN used when connecting to the TURN/TCP server via a
proxy is set to "webrtc". It can be changed by adding an alpn url
option for the http-proxy. For example:
http://user:pass@my.http.proxy.com:8080?alpn=c-webrtc
This will add the header "ALPN: c-webrtc" to the HTTP proxy CONNECT
request.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4212>
Pass GstVideoInfoDmaDrm or GstVideoInfo whenever possible, avoiding passing
strange combination of GstVieoFormat + modifier. Even though we don't have any
at the moment, this also allow supporting GstVideoFormat that are not supported
in our DRM integration.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5120>
Rework the va_map_unlocked() after we keep mapping behavior (whether to
use derive) consistent with allocator_try stage. Also remove the flag
for iHD case because pitch/stride difference between vaCreateImage and
vaDeriveImage only possibly happen on iHD by now.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5046>
In gst_va_allocator_try, the first try is to use derive_image, if it
succeeds, we should use info from derived image to create bufferpool.
If derive fails, then try create_image and give created image info
to the pool.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5046>
There's no reason to release GstMemory manually at all.
If we do release GstMemory, corresponding GstBuffer will be
discarded by GstBufferPool baseclass because the size is changed
to zero.
Actual cause of heavy CPU usage in case of fixed-size pool
(i.e., decoder output buffer pool) and if we remove GstMemory from
GstBuffer is that GstBufferPool baseclass is doing busy wait in acquire_buffer()
for some reason. That needs to be investigated though, discarding
and re-alloc every GstBuffer is not ideal already.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4935>
The current way of using gst_video_info_set_format() will change all
fields of the GstVideoInfo. We only need to change its format, stride
and offset fields.
In order to keep the consistency with th common drm API, we rename the
gst_va_video_info_from_dma_info() into gst_va_dma_drm_info_to_video_info().
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4883>
As VK_FORMAT_FEATURE_2_xxx are defined as static const variable, the
vscoce C compiler prevents the initialization of the vk_usage_map
structure with error "C2099: initializer is not a constant".
Init the structure separately.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4904>
Adding GST_CUDA_CRITICAL_ERRORS env variable so that program can be
terminated on unrecoverable error.
Example)
GST_CUDA_CRITICAL_ERRORS=2,700 gst-launch-1.0 ...
In this example, CUDA_ERROR_OUT_OF_MEMORY(2) and
CUDA_ERROR_ILLEGAL_ADDRESS(700) are registered as critical error
and program will be aborted on those errors
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4729>
Change the internal GstVideoInfo structure in the GstVaDmabufAllocator to
GstVideoInfoDmaDrm in order to keep track of the exported DRM format by the
driver, and thus removing the DRMModifier quark attached as qdata in the
GstMemory. Though, the exposed API isn't updated yet; that has to go in a
second iteration.
Also this patch clean up some code (remove an unused buffer size assignation)
and fix some typos in documentation.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4821>
Some surface formats such as GST_VIDEO_FORMAT_Y42B and GST_VIDEO_FORMAT_RGB
can be created but can not be exported as DMA buffer. You can not say that
this is a driver bug because the driver may never want to share this kind of
surface out of libva.
And this function will be used to detect modifiers later, so the error message
will be annoying.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4821>
Decoder bounded CUDA memory is allocated by driver and the pool size
is fixed. Since we don't know how many buffers would be held by
downstream non-CUDA element, we should download such CUDA memory
and release it back to decoder.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4810>
New vulkan formats don't match the number of planes with the number of memories
attached to the buffer. This patch changes the pattern of using planes for
traverse the memories with the number of attached memories.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4351>
It's a generalization of the original gst_vulkan_get_or_create_image_view().
The reason for passing the whole VkImageViewCreateInfo structure rather than
just the missing fields, is because VkImageSubresourceRange and
VkComponentMapping can be different and those are most of VkImageViewCreateInfo.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4351>
This is going to be used when the pool is used by a video decoder for
VK_IMAGE_USAGE_VIDEO_DECODE_DST_BIT_KHR, since the frame allocation needs the
VkVideoProfileInfoKHR, and for that here GstCaps is used to wire it.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4351>
The specification says:
VUID-vkAllocateMemory-pAllocateInfo-01713
must pAllocateInfo->allocationSize be less than or equal to
VkPhysicalDeviceMemoryProperties::memoryHeaps[memindex].size where memindex =
VkPhysicalDeviceMemoryProperties::memoryTypes[pAllocateInfo->memoryTypeIndex].heapIndex
as returned by vkGetPhysicalDeviceMemoryProperties for the VkPhysicalDevice that
device was created from.
Though this can be catch by the validation layer, the requested frame size
depends on the use case so it's better to check this restriction by our code.
This patch also makes use of this new function to find memory type index,
and removes the unused function to find memory type index, which, as GstVulkan is
considered unstable, we can do it.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4351>
The purpose of this function is to get more info about the mapped Vulkan format
from the GStreamer format, since they can be multiple Vulkan formats for one
GStreamer format.
Also a Vulkan format may have certain usage and aspects that must be verified.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4351>
Originally the opened device only created one queue of one family queue, to say
graphics one. This approach felt short when other queue family is required not
shared with the graphics queue family, for example video decoding.
This new approach proposes to create those queues with supported families. For
now, only video decoding and encoder are created, if they are available.
In order to hold multiple queues opened, an array of VkDeviceQueueCreateInfo is
held along the live the device object, because it's used to traverse or get the
opened queues.
The algorithm to choose which queues create (or open) is to look for the queue
with more family bits, which also supports the one we are requesting, thus
minimizing the number of global queues of a certain family to create.
Nonetheless, the number of queues to open per family is set to be all of them,
widening the possibility of parallelism.
Also, this commit do a cosmetic refactor the assigning the physical device
nearer where it's used.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4351>
Also adds a meson option to enable them.
The symbol GST_VULKAN_HAVE_VIDEO_EXTENSIONS is an alias of
defined(VK_VERSION_1_4) || (defined(VK_VERSION_1_3) && VK_HEADER_VERSION >= 238
if the option is allowed.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4351>
when play rtsp stream with playbin3 enabled, there are some critical logs:
g_object_get_is_valid_property: object class 'GstPlayBin3' has no property named 'n-video'
g_object_get_is_valid_property: object class 'GstPlayBin3' has no property named 'n-audio'
g_object_get_is_valid_property: object class 'GstPlayBin3' has no property named 'n-text'
self->collection could be NULL when READY->PAUSED if the pipeline
is live, then it will fallback to query playbin2's property,
we can call gst_play_streams_info_create_from_collection
directly, it will check self->collection internal.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4460>
This is no longer needed since the introduction of `gst_macos_main()` in 1.22.
Before that existed, we had a patch for GLib in Cerbero, which did work but made it
impossible to update GLib at all. The code being removed was a fail-safe in case of
running without said patch being applied. It's no longer needed, since for macOS
we just wrap our GStreamer with an NSApplication using `gst_macos_main()`.
Warnings will be displayed if no NSApp/NSRunLoop is found wherever needed,
pointing the user towards using the new API.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4366>
The addresses we get from `resolve_host_finish()` (via
`resolve_host_async()`, `resolve_host_main_cb()`, `on_resolve_host()`,
`g_resolver_lookup_by_name_finish()`) must be freed. Otherwise we leak
memory.
Leak found and confirmed fixed with GCC AddressSanitizer.
Change-Id: If32d24452d626234f01b253b77a7d6d16eac1cee
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4469>
Running element_vkcolorconver test with Vulkan validation layer this error is
raised:
Code 0 : Validation Error: [ VUID-VkMappedMemoryRange-size-01390 ] Object 0:
handle = 0x100000000010, type = VK_OBJECT_TYPE_DEVICE_MEMORY;
| MessageID = 0xdd4e6d8b
| vkFlushMappedMemoryRanges: Size in pMemRanges[0] is 0x4, which is not a
multiple of VkPhysicalDeviceLimits::nonCoherentAtomSize (0x40) and offset +
size (0x0 + 0x4 = 0x4) not equal to the memory size (0xb). The Vulkan spec
states: If size is not equal to VK_WHOLE_SIZE, size must either be a multiple of
VkPhysicalDeviceLimits::nonCoherentAtomSize, or offset plus size must equal the
size of memory
The reason of is that the image size used in the test doesn't comply hardware
restrictions. In order to avoid juggling with image size and hardware
restrictions, this patch proposes to use VK_WHOLE_SIZE macro.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4296>
While using the validation layer with this pipeline:
gst-launch-1.0 videotestsrc num-buffers=10 ! vulkanupload ! vulkancolorconvert ! vulkansink
The validation layer throws this message:
Code 0 : Validation Error: [ VUID-VkAttachmentDescription-format-06699 ]
Object 0: handle = 0x5555562e9610, type = VK_OBJECT_TYPE_DEVICE; | MessageID = 0x52b3229e |
vkCreateRenderPass: pCreateInfo->pAttachments[0] format is
VK_FORMAT_B8G8R8A8_UNORM and loadOp is VK_ATTACHMENT_LOAD_OP_LOAD, but
initialLayout is VK_IMAGE_LAYOUT_UNDEFINED.
The Vulkan spec states: If format includes a color or depth aspect and loadOp is
VK_ATTACHMENT_LOAD_OP_LOAD, then initialLayout must not be VK_IMAGE_LAYOUT_UNDEFINED
When creating the render pass the loadOp can be either
`VK_ATTACHMENT_LOAD_OP_CLEAR` or `VK_ATTACHMENT_LOAD_OP_LOAD` depending on
`enable_clear`. While `enable_clear` is FALSE by default (which means
`VK_ATTACHMENT_LOAD_OP_LOAD`). Nonetheless, its value is explicitly changed by
`vkoverlaycompositor` to FALSE too!
This behavior was introduced in merge request #2470 where
`VK_ATTACHMENT_LOAD_OP_CLEAR` was a fixed value for loadOp. Thus, the bug
consists in a missing initialization of `enable_clear` to TRUE from that merge
request.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4296>
Specification says:
"""
engineVersion is an unsigned integer variable containing the developer-supplied
version number of the engine used to create the application.
"""
Assuming the engine is GStreamer, it would be expected to set its version as
engine version.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4243>
In the same spirit of libva-win32 elements this patch shows the driver of each
element in gst-inspect, giving more information to the user. This driver
description is parsed from vaQueryVendorString from mesa and intel drivers,
while copied as is for others. Also appends the render node for multi gpu
systems.
Fixes#2349
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4204>
The appropriate return value for incomplete NAL header should be
GST_H264_PARSER_NO_NAL_END. This tells the parser element to
gather more data. Previously, it would assume the NAL is corrupted
and would drop the data, potentially causing stream corruption.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3234>
Previously, reassigning loop index l in nicestream.c
could cause a segfault if l->data was null, as it could
reassign l to a null variable, triggering the loop
postassignment l->next, which then segfaults due to
l now being null. It is instead moved into the loop.
_delete_transport already performs the reassignment
inline.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4192>
This allow simplifying the GstVideoInfo handling in the sinks. Instead
of having to update a video info for the import, the sink can simply pass the
video info associated with the caps and rely on the VideoMeta in the GstBuffer
to obtain the appropriate offset and stride.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3801>
gstcudaloader.cpp defines GST_DEBUG_CATEGORY (gst_cudaloader_debug);
but it wasn't initializing it anywhere.
This caused the following error to be logged by gst-plugin-scanner when
libcuda.so.1/nvcuda.dll couldn't be loaded, e.g. in systems without
CUDA:
(gst-plugin-scanner:39618): GStreamer-CRITICAL **: 14:40:22.346:
gst_debug_log_full_valist: assertion 'category != NULL' failed
This patch fixes the bug by initializing the category in
gst_cuda_load_library_once_func() before any logging occurs.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4154>