And also re-timestamp them with the current buffer's PTS.
Not doing so keeps the timestamps of event packets as
GST_CLOCK_TIME_NONE or the timestamp of the previous buffer, both of
which are bogus.
Making sure that (especially) the first packet has a valid timestamp
allows putting e.g. the NTP timestamp RTP header extension on it.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5173>
Parse the speed and scale in the server's response
*before* the range, so that the range start/stop
are swapped (or not swapped) correctly based
on the server's actual chosen values. Otherwise,
the old rate from the segment is used - what the
last seek asked for, but not necessarily what
the server chooses.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6248>
In the situation where playback starts from a keyframe before
the target playback segment, then the first buffers will be
outside the configured segment and gst_segment_to_stream_time()
will return GST_CLOCK_TIME_NONE unconditionally.
If drop-out-of-segment is false, the RTP buffers will not be
dropped, but will be sent witout ONVIF extension timestamps
and given GST_CLOCK_TIME_NONE timestamps on the receiver.
Instead, use gst_segment_to_stream_time_full() to extrapolate
stream time outside the segment so that such buffers still
get assigned their correct timestamps on the receiver.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6248>
Don't accidentally include the stuffing byte (if present)
into the bottom field size. It should only be included in the
total segment length.
Fixes problems with FFmpeg not rendering the subtitles
with a stuffing byte, giving a "Invalid object location!" error.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6250>
Cocoa version of glwindow only checks the preferred size upon window creation. glimagesink sets the size right before
calling gst_gl_window_show(), which might be way after the window is created in some cases. If the size was set too
late, glimagesink on macOS would remain 320x240 unless manually resized.
This change makes sure to resize the existing window when _show() is called.
Curiously, this has always been an issue, but went from manifesting every once in a while to being almost completely
broken once old event loop workarounds were removed and gst_macos_main() was introduced.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6185>
Don't use g_return_val_if_fail() to catch the
open-ended segment or empty segment cases in
gst_segment_to_running_time_full()
g_return_val_if_fail() is for programmer errors,
and can be compiled out with a flag.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6219>
Provide a clock from the source that is a monotonic system clock with
the rate corrected based on the measured and ideal capture rate of the
frames.
If this clock is selected as pipeline clock, then provide perfect
timestamps to downstream.
Otherwise, if the pipeline clock is the monotonic system clock, use the
internal clock for converting back to the monotonic system clock.
Otherwise, use the monotonic system clock time calculated in the above
case and convert that to the pipeline clock.
In all cases this will give a smoother time than the previous code,
which simply took the difference between the driver provided capture
time and the current real-time clock time, and applied that to the
current pipeline clock time.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6208>
Otherwise there's a small window between querying the state and doing
the transfer in which a frame could be dropped, and we would then output
the frame right after the dropped one as if it was the dropped frame.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6208>
In low delay B mode, the P frame is converted as B frame with forward
references. For example, One P frame may refers to P-1, P-2 and P-3 in
list0 and refers to P-3, P-2 and P-1 in list1.
So the num in list0 and list1 does not reflect the forward_num and
backward_num. The vaapi does not provide ref num for forward or backward
so far. In this case, we just consider the backward_num to be 1 conservatively.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6249>
In b_pyramid mode, B frames can be ref and prevPicOrderCntLsb can
be the B frame POC which is smaller than the P frame. This can cause
POC diff bigger than MaxPicOrderCntLsb/2 and generate wrong POC value.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6249>
Gets being released memory back to queue even if allocator is flushing
in order to count the number of outstanding memory objects.
Also, clear queue if there's no outstanding memory object and
allocator is flushing
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6240>
Making it possible to properly handle compositors that have those
properties as doubles and handle antialiasing.
Internally we were handling those values as doubles in framepositioner,
so expose new properties so user can set values as doubles also.
This changes the GESFramePositionMeta API but we are still on time for 1.24
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6241>
The `G_DECLARE_FINAL_TYPE` macro does not need to be terminated with a
semicolon and the extra semicolon breaks building e.g. libcamera with
clang because `-Wextra-semi` is used which produces the following
error in conjunction with `-Werror`:
```
gstreamer-1.0/gst/allocators/gstdrmdumb.h:61:43: error: extra ';' outside
of a function is incompatible with C++98 [-Werror,-Wc++98-compat-extra-semi]
61 | GST, DRM_DUMB_ALLOCATOR, GstAllocator);
| ^
1 error generated.
```
Fix this by removing the extra semicolon
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6239>
Syncrhonizing buffer commits to the streaming thread can lead to
dropped frames when frame callbacks are not processed before the
next frame is ready for rendering. Depending on the drift between
the wayland compositor and buffer source timings, this can lead to
periods of significant frame drop, especially when the media frame
rate is close to the display frame rate.
Cache buffers in the streaming thread and peform commits on the
display thread to eliminate the buffer commit racing.
The implementation is the same for both waylandsink and gtkwaylandsink,
so move it to the common wayland library under gst-lib.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6133>
Add synchonized versions of wl_display_sync() and wl_callback_destroy()
that will ensure that to callbacks can be managed in a thread safe way
on the display queue even when they are dispatched from a separate
thread.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6133>
Unprepare method posts WM_GST_D3D11_DESTROY_INTERNAL_WINDOW
command to the window queue, and from that moment considers
internal_hwnd to be released, and so it sets it to null.
The problem is that it's possible that right at that moment
the window thread might be already processing some other
command, or just another command might be already in the queue.
On practice we met a crash when WM_PAINT got processed in between
(unprepare already finished and WM_GST_D3D11_DESTROY_INTERNAL_WINDOW
was not handled yet)
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6187>
In the case where the queue shrinks due to a property change and the queue
becomes full, we would set the waiting_del flag, which would prevent posting the
100% buffering message on the bus. Since the pipeline is not aware of the new
buffering value, in the common case where the pipeline is paused during
buffering, it would never resume.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6165>
Remove the percent_changed check to determine whether a buffering message should
be posted. The check on the last posted buffering value is sufficient, and the
removal doesn't introduce additional complexity.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6165>
If input height and parsed one are identical, do not consider it as interlaced
Fixing below pipeline:
gst-launch-1.0 videotestsrc ! video/x-raw,format=I420,width=640,height=10 \
! jpegenc ! jpegparse ! jpegdec ! videoconvert ! autovideosink
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6181>
When dealing with demuxers which aren't streams-aware, we need to handle the
old-school "stream replacement" dance from `parsebin` and hide that in such a
way that output pads are re-used (if compatible).
By analyzing the collection posted by parsebin, we can:
* Identify whether some output slots are no longer used (because the stream they
currently handle is not present in the collection)
* Decide if some upcoming streams could re-use the existing slot
This supports both buffering and non-buffering modes.
Fixes#1651
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6201>
When the conversion is only caps feature from memory:VAMemory to system memory,
it's possible to optimize by doing a pseudo pass-through since the va-backed
buffers are the same for system memory buffers.
This change will also mitigates #2940
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6174>
If the allocation query received from downstream doesn't handle GstVideoMeta but
it requests memory:DMABuf caps feature, it's incomplete, so we rather reject the
negotiation.
Both in base decoder, base transform and compositor.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6155>
When switching urisourcebin, ensure that we first unlink *all* pads from
decodebin3 before linking them again.
This is to ensure that decodebin3 completely knows that all previous pads are no
longer needed and can prepare itself to being re-used.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6179>
The value is stored as an 8 bit integer, with 0 meaning that there is
not data for this extension. That means that the maximum length is 255
bytes and not 256 bytes.
On the other hand, the one-byte RTP header extensions are storing the
length as a 4 bit integer with an offset of 1 (i.e. 0 means 1 byte
extension length), so here 16 is the correct maximum length.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6180>
This is a simplification of the venerable
gst_va_base_dec_get_preferred_format_and_caps_features() function, which
predates since gstreamer-vaapi. It's used to select the format and the
capsfeature to use when setting the output state. It was complex and hard to
follow. This refactor simplifies a lot the algorithm.
The first thing to remove _downstream_has_video_meta() since, most of the time
it will be called before the caps negotiation, and allocation queries make sense
only after caps negotiation. It might work during renegotiation but, in that
case, caps feature change is uncommon. Better a simple and common approach.
Also, for performance, instead of dealing with caps features as strings, GQuarks
are used.
The refactor works like this:
1. If peer pad returns any caps, the returned caps feature is system memory and
looks for a proper format in the allowed caps.
2. The allowed caps are traversed at most 3 times: one per each valid caps
feature. First VAMemory, later DMABuf, and last system memory. The first to
match in allowed caps is picked, and the first format matching with the
chroma is picked too.
Notice that, right now, using playbin videoconvert never return any.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6154>
Some subtitle "decoders" had a wrong category of "Parser", which `parsebin`
relies on to identify elements which do not *decode* streams but *parse* them.
This would cause such subtitle decoders to be plugged in within parsebin,
preventing the original stream to be properly used by (more efficient)
downstream decoders or subtitle renderers.
Fixes#1757
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6153>
If we drop all messages with the same clock id as ours we will also
drop all messages coming from a PTP clock on our host since both clock
ids are build from the same MAC address.
At least for Linux we do not see our own messages anyway since the
network stack can well distinguish between multicast send from our
socket or from another socket on the same machine. To make sure that
this works for all supported platforms just drop delay requests since
this is the only message that is sent from the GStreamer PTP clock.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6172>
If we don't specify a path for loading, the runtime linker will search
for the library instead, which will use the usual mechanisms: RPATHs,
LD_LIBRARY_PATH, PATH (on Windows), etc.
Also try harder to load a non-devel libpython using INSTSONAME, if
available.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6159>
After a flushing seek, rtspsrc doesn't reset the last_ret value for
streams, so might immediately shut down again when it resumes pushing
buffers to pads due to a cached `GST_FLOW_FLUSHING` result
Prevent a stored flushing value from immediately stopping
playback again by resetting pad flows before (re)starting
playback.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6137>
This can be used to store informational messages, errors or
warnings which can later be shown to the user in gst-inspect-1.0,
which can be useful for plugins that expose elements dynamically
based on external libraries or hardware capabilities.
Status messages can then provide an indication as to why a
plugin doesn't have any elements listed, for example.
Plus unit test to make sure code paths are exercised a little.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3832>
This inherits from the same rule as gst_buffer_add_meta
```
gst-mpegtspesmetadatameta.h:98: Warning: GstMpegts:
gst_buffer_add_mpegts_pes_metadata_meta: return value: Invalid non-constant
return of bare structure or union; register as boxed type or (skip)
```
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6146>
Because this depayloader may build several output buffers within one
process run we push them all into a GstBufferList and push them out at
once to make sure that each buffer gets notified about each header
extension.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5378>
Because this depayloader may build several output buffers within one
process run we push them all into a GstBufferList and push them out at
once to make sure that each buffer gets notified about each header
extension.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5378>
Because this depayloader may build several output buffers within one
process run we push them all into a GstBufferList and push them out at
once to make sure that each buffer gets notified about each header
extension.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5378>
Because this depayloader may build several output buffers within one
process run we push them all into a GstBufferList and push them out at
once to make sure that each buffer gets notified about each header
extension.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5378>
Because this depayloader may build several output buffers within one
process run we push them all into a GstBufferList and push them out at
once to make sure that each buffer gets notified about each header
extension.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5378>
Because this depayloader may build several output buffers within one process
run we push them all into a GstBufferList and push them out at once to
make sure that each buffer gets notified about each header extension.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5378>
This reverts questionable commit 009bc15f33
which looks completely wrong.
The GstWasapi2RingBuffer:buffer_size variable is used to
calculate available buffer size we can write
(i.e., available size = buffer_size - padding_size).
But the commit makes the size to be exactly same as buffer period.
Then, it can confuse this element as if the endpoint buffer is full on
I/O event callback (if padding size is equal to buffer period)
but it's not true.
Fixes: https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/2870
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6132>
- Add the missing field parameter and put the output parameter at the
end.
- Use a switch to verify valid values instead of hard-to-follow range
checks.
- Don't consider bad values a programming error, just a regular failure.
- Set all data fields at the end so we can pass a pointer to an
uninitialized structure without GCC complaining.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5450>
The global semaphore was never closed/unlinked, causing permission
denied issue if the device is later used by another user. Properly
removing the semaphore when stopping the pipeline would still leave it
open in case of a crash.
With a GStreamer specific name, it was also not preventing other apps to access
the device concurrently.
Finally, if the system has multiple cards, the lock should be per card
and not global (to be confirmed).
Fixes: #3283.
Sponsored-by: Netflix Inc.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6117>
MaxDpbSize specified in A.4.2 tells upper bound of decoded picture
buffer size but does not tell actual required size.
Use max_dec_pic_buffering value as a dpb size. Some backends
such as DXVA and NVDEC might require pre-allocated DPB buffer
and unnecessary large DPB size will result in waste of GPU memory.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6101>
In rtpbin we already systematically check for all property names
except latency, correct that.
In webrtcbin we need to check before trying to use the do-retransmission
property.
This is useful for the case where an element like identity gets passed
to rtpbin's request-jitterbuffer property, when the application wants
to use webrtcbin in an SFU situation, with no reordering and no added
latency
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6112>
When allocating buffers with alignment parameters specified, it
may be necessary to overallocate memory to adjust to the requested
alignment. Previously the padding length was not included in the mmaped
buffer size, leaving unmapped bytes at the end of the buffer.
This caused intermittent SEGV faults and valgrind failures when running
the wayland_threads example.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6104>
The srt unittest test_src_listener_sink_call will sometimes fail under
valgrind with the following splat:
Memcheck, a memory error detector
Copyright (C) 2002-2017, and GNU GPL'd, by Julian Seward et al.
Using Valgrind-3.18.1 and LibVEX; rerun with -h for copyright info
Parent PID: 14579
HEAP SUMMARY:
in use at exit: 799,848 bytes in 2,182 blocks
total heap usage: 64,090 allocs, 61,908 frees, 37,891,032 bytes allocated
120 bytes in 1 blocks are definitely lost in loss record 1,563 of 1,681
at 0x4842FF5: operator new(unsigned long) (vg_replace_malloc.c:422)
by 0x6031E29: srt::sync::SetThreadLocalError(CUDTException const&) (sync_posix.cpp:461)
by 0x5FCD77E: CUDT::epoll_wait(int, std::set<int, std::less<int>,
std::allocator<int> >*, std::set<int, std::less<int>,
std::allocator<int> >*, long, std::set<int, std::less<int>,
std::allocator<int> >*, std::set<int, std::less<int>, std::allocator<int> >*) [clone .cold] (api.cpp:3796)
by 0x5FE2F79: UDT::epoll_wait2(int, int*, int*, int*, int*, long, int*, int*, int*, int*) (api.cpp:4277)
by 0x5F0C626: gst_srt_object_read (gstsrtobject.c:1569)
by 0x5F0F978: gst_srt_src_fill (gstsrtsrc.c:180)
by 0x5F5A2A1: gst_base_src_default_create (gstbasesrc.c:1620)
by 0x5F5C9AE: gst_base_src_get_range (gstbasesrc.c:2630)
by 0x5F5EF5A: gst_base_src_loop (gstbasesrc.c:2959)
by 0x4918B13: gst_task_func (gsttask.c:399)
by 0x4A60B33: g_thread_pool_thread_proxy.lto_priv.0 (gthreadpool.c:354)
by 0x4A5DC41: g_thread_proxy (gthread.c:826)
by 0x4F532A4: start_thread (pthread_create.c:481)
by 0x4C71322: clone (clone.S:95)
An issue has been started against libsrt here:
https://github.com/Haivision/srt/issues/2867
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6098>
External plugin loader support for Windows is introduced
in this dev cycle. Since helper binary was not required (useless)
before this version, people may not ship the binary
with new GStreamer version, then they will observe warning message.
Instead of displaying the warning at plugin loading time,
checks helper bin earlier and disable external plugin loader
if helper binary is not installed.
Fixes: https://gitlab.freedesktop.org/gstreamer/cerbero/-/issues/448
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6083>
According to recommendation from MS, IDXGIOutputDuplication::ReleaseFrame()
needs to be called just before IDXGIOutputDuplication::AcquireNextFrame()
for performance reasons, so that driver can accumulate dirty rects
and update texture at once. But it seems to cause choppy output.
Do release acquired frame immediately once processing done,
like d3d11 implementation does.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6092>
* Bump the rank of the musepack v7/v8 FFmpeg demuxers to SECONDARY
* Bump the rank of the musepack v7/v8 FFmpeg audio decoders to SECONDARY
* Demote the rank of the musepackdec element to MARGINAL
This is for two reasons:
* The musepack library is no longer maintained, whereas the FFmpeg
implementation can/will receive fixes
* The `musepackdec` implementation was a all-in-one "parsing and decoding" blob
which doesn't play nicely with decodebin3 and others
Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/3033
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6074>
Sends a gap event if nothing to output for a given input buffer.
For example, an input buffer might not contain any caption data
for downstream requested field, then we need to inform downstream
of the case.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6073>
WebKit commit b12e7ed2ad3a ("[WPE] Upstream the new WPE platform API
https://bugs.webkit.org/show_bug.cgi?id=265286")[1] added a `WPEView` typedef
which clashes with our `WPEView` class.
Rename the `WPEView` class to `GstWPEThreadedView` to avoid the collision.
Also prefix the `WPEContextThread` class with `Gst` and rename the
source files to reflect the new class name and use lowercase while at it
for consistency
[1] b12e7ed2ad
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6065>
Previously, the path lock was held even while issuing caps queries to
other elements. This can lead to deadlocks in more complex pipelines.
Avoid this by reworking gst_switch_bin_get_allowed_caps() to acquire
references to switchbin paths and then releasing the path lock.
Subsequent operations in that function then act on the acquired
references, thus eliminating the need for holding the path lock for
the entirety of that function.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4632>
The caps query specifies _all_ caps that the element can handle, not just
caps from the current path element. If for example a switchbin has two
paths, with one having an element that handles video/x-h264, and another
path whose element handles video/x-raw, and the second path is the
current path, then the existing code would report only video/x-raw as
supported. Fix this by report all allowed caps, even if there is a
current path defined.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4632>
The rationale is that a passthrough path (= one with no element) behaves
as if the switchbin's sink- and srcpad were one. In particular, internal
caps queries (needed for computing the allowed caps) then go to the peers
instead to path elements. Rework gst_switch_bin_get_allowed_caps () for
a clear handling of NULL path elements and for proper dataflow passthrough
and caps & accept-caps query handling.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4632>
The drop probe was present in early switchbin versions to implement paths
that drop dataflow. However, this feature turned out to be too problematic
and thus was removed. Some bits remained though. This commit removes those
bits and clarifies that in the current switchbin version, a NULL path
element instead means passthrough.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4632>
It was adding and subtracting the segment base here and there, but it
was also doing so incorrectly, leading to various calculation errors.
Fixed a few bugs uncovered, related to getting a new segment:
* If we reset base_ts/next_ts/out_frame_count, also reset prevbuf
* Only do so if the new segment is different than the previous one
Also replaced a few occurrences of GST_BUFFER_TIMESTAMP with
GST_BUFFER_PTS for consistency.
Integrated the tests of
https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2186
, now passing. The test_segment_update_same test had to be fixed,
because it was wrongly assuming that we would not fill the gap inside
the new-but-same segment.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6031>
If the current segment has a configured stop point, detect
when when pad timestamps proceed past that point and mark
them as EOS. Otherwise, tsdemux continues streaming
the whole input downstream (unless something downstream detects
and returns EOS for us)
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6023>
Use string parsing instead of pointer arithmetic, which makes the code
easier to understand and less error-prone. This has no functional
changes, and is preparation for the next commit, which extends the
header parsing.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5997>
