We did not take the sample size into account. Rearrange the tests to have more
conversion test and an extra test case for passthrough operations.
Fixes#759890
Use (1 << 31) as the multiplier for int<->float conversions. This makes
sure that int->float conversions always end up with floats between
[-1.0, 1.0].
For the conversion from float to int, this multiplier will give the complete
int range after we perform clipping.
Change the unit test to take this into consideration.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=755301
While creating caps in audiointerleave tests, bitmask is being set as 0x9
This is resulting in segmentation fault. Fix the same by typecasting to guint64
https://bugzilla.gnome.org/show_bug.cgi?id=755840
We need to sync the pad values before taking the aggregator and pad locks
otherwise the element will just deadlock if there's any property changes
scheduled using GstController since that involves taking the aggregator and pad
locks.
Also add a test for this.
https://bugzilla.gnome.org/show_bug.cgi?id=749574
The original 0/1 framerate must still be allowed to be configured
on the upstream side of videorate, otherwise future caps renegotiation
is going to fail.
https://bugzilla.gnome.org/show_bug.cgi?id=750032
A bitmask is 64 bits, but integer immediates are passed as int
in varargs, which happen to be 32 bit with high probability.
This triggered a valgrind jump-relies-on-uninitalized-value
report well away from the site, since it doesn't trigger on
stack accesses, and there must have been enough zeroes to stop
g_object_set at the right place.
Remove all the bus watch and main loop code from the block_deadlock
test, it's not needed: neither pipeline will ever post an EOS or ERROR
message on the bus, and we're the only ones posting an error, from a
timeout. Might just as well just sleep for a bit and then do whatever
we want to do.
Don't gratuitiously set tcase timeout, just use whatever is the
default (or set via the environment).
Make individual pipeline runs shorter.
Check for valgrind and only do a handful iterations when running
in valgrind, not 100 (each iteration takes about 4s on a core i7).
Make videotestsrc output smaller buffers than the default resolution,
we don't care about the buffer contents here anyway.
Fixes test timeouts when run in valgrind.
On slower systems, or under high system load (e.g. check-valgrind),
the sending_buffers_with_9_gstmemories test would sometimes fail,
because the read call only returns 32 bytes instead of the full
36 bytes expected. This is because multisocketsink might end up
doing a partial write of 32 bytes first, and then write the
missing 4 bytes later, but since we don't wait for all of data
to be written, there's a short window where our read call in the
unit test might then only receive the 32 bytes written so far,
which makes it deeply unhappy.
Instead, make sure we loop to read all bytes.
In case upstream does not provide videorate with framerate information,
it will detect the current framerate from the buffer it received,
but if downstream forces the use of variable framerate (most probably
through the use of a caps filter with framerate = 0 / 1), videorate will
respect that.
And add some unit tests
https://bugzilla.gnome.org/show_bug.cgi?id=734424
If a buffer is made up of non-contiguous `GstMemory`s `gst_buffer_map`
has to copy all the data into a new `GstMemory` which is contiguous. By
mapping all the `GstMemory`s individually and then using scatter-gather
IO we avoid this situation.
This is a preparatory step for adding support to multisocketsink for
sending file descriptors, where a GstBuffer may be made up of several
`GstMemory`s, some of which are backed by a memfd or file, but I think this
patch is valid and useful on its own.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=746150
The flush stop could have happened between the source trying
to push the segment event and the buffer, this would cause a warning.
Prevent that by taking the source's stream lock while flushing.
https://bugzilla.gnome.org/show_bug.cgi?id=742684
With the current audiomixer, the input caps need to be the same,
otherwise there is an unavoidable race in the caps negotiation. So
enforce that using capsfilters
https://bugzilla.gnome.org/show_bug.cgi?id=742684
Adds a new test to textoverlay to make sure it can properly handle
elements that have ANY caps but fail to add the overlay meta in
the allocation query.
This test verifies that textoverlay won't use the caps features even
knowing that the overlay meta is accepted when querying the downstream
caps because it also needs downstream to confirm by putting the meta
in the allocation query.
https://bugzilla.gnome.org/show_bug.cgi?id=735800
Make textoverlay negotiate caps more correctly.
1) Check what caps we received in the video-sink
2) If it already has the overlay meta -> use it directly
3) If it doesn't, textoverlay try adding the overlay meta and using it,
if downstream doesn't support it, just use what is received in the
video-sink
4) Check if the allocation query also supports the meta to enable
really using it
Before it wasn't really doing renegotiation of any kind, just
re-checking if it should use the overlay meta or not
Also had to update the caps in the test as memory:SystemMemory seems
to be required when you use a caps feature otherwise intersection/subset
checks will fail.
https://bugzilla.gnome.org/show_bug.cgi?id=733916
Set up a fakesink with a pad probe to replace the missing encoder to detect
if encoding was really required and only error out in this case. Otherwise
just let passthrough branch work.
This delays the error posting from the set_state function to when buffers
are really flowing. Unit test updated accordingly
https://bugzilla.gnome.org/show_bug.cgi?id=650652
Aggregate buffering messages to only post the lower value
to avoid setting pipeline to playing while any multiqueue
is still buffering.
There are 3 scenarios where the entries should be removed from
the list:
1) When decodebin is set to READY
2) When an element posts a 100% buffering (already implemented)
3) When a multiqueue is removed from decodebin.
For item 3 we don't need to handle it because this should only
happen when either 1 is hapenning or when it is playing a
chained file, for which number 2 should have happened for the
previous stream to finish
https://bugzilla.gnome.org/show_bug.cgi?id=726423
With the latest GLib, g_source_remove() complains about not finding
the timeout source with the given ID here, since it was already
destroyed by returning FALSE from the timeout callback. Also return
FALSE from the bus watches when we don't want to be called any more.
Wait for thread to exit before starting to free the
to_push list, otherwise thread might check the final
to_push->next node only after we've freed it already.
The array of factories should not contain a NULL element at the end
since the number of arguments is determined via G_N_ELEMENTS and the
NULL will be used as an argument to gst_element_factory_make() if
the other sources in the list weren't usable.
This allows getting a pad for a specific encoding profile, which can
be useful when there are several stream profiles of the same type.
Also update the encodebin unit tests so that we check that the returned
pad has the right caps.
https://bugzilla.gnome.org/show_bug.cgi?id=689845
We were setting the query-func on the sink-pad, which got overwritten when
adding the new pad to collect pads. Instead register our query-func with the
collect pads object. This fixes filter caps. Add a test for it.
A return value of FALSE here indicates that we don't have control-values. In
0.10 we were returning the default value of the property. Now we don't fill an
array with defaults in the ControlBinding, but leave it up to the element to
handle this case.
The behaviour is sensibly changed here. Instead of purely falling when a
preset is set on the #GstEncodingProfile, we now make sure that the
element that is plugged corresponds to the one specified as preset. Then,
if we have a preset_name, we use it, if it fails, we fail (we might rather
just keep working even without setting the element properties?)
+ Add tests that it behave correctly
Enhance current code to prefer an exact match on sample depth if
possible. Also ignore GST_AUDIO_FORMAT_FLAG_UNPACK when checking
equality on the flags.
There won't be a tag messages on the bus, because tags
are now sent downstream for sinks to post on the bus,
and there's no sink involved here that would do that.
Secondly, the audio decoder base class only sends the
tags out once it has received some non-header data as
input, which is not something we're providing here.
Fix invalid memory access caused by broken pointer arithmetic.
If we have a uint16_t *tmpbuf and add n * dest->stride to it, we
skip twice as much as we intended to because dest->stride is in
bytes and not in pixels. This made us write beyond the end of
our allocated temp buffer, and made the unit test crash.
Since we now use videoconvert, which supports these.
Unfortunately videoscale still crashes with 64-bit formats
right now because of a too small temp buffer, but I'm sure
someone is going to fix this real soon now, just like the
other unit tests.
Make the uri property getter return the next uri, like it was configured in the
setter.
Make a new current-uri and current-suburi property that reflects the currently
playing uri and suburi.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=676665
