Older kernels don't have these, and there's no easy way to check for the
existance of enums that doesn't involve a configure check, so just define
these if the V4L2_CAP_VIDEO_OUTPUT_OVERLAY define is not there, which was
added in the same commit as the TB/BT enum. Fixes compilation on CentOS 5.
https://bugzilla.gnome.org/show_bug.cgi?id=639339
This reverts commit 9e1d419d07.
Reverting this since it adds unreviewed and bad API to v4l2src
(property of type enum, with seemingly random and unsorted values).
with i686-apple-darwin10-gcc-4.2.1:
gstv4l2object.c: In function 'gst_v4l2_object_get_nearest_size':
gstv4l2object.c:1988: warning: format '%u' expects type 'unsigned int', but argument 12 has type 'gint *'
gstv4l2object.c:1988: warning: format '%u' expects type 'unsigned int', but argument 13 has type 'gint *'
MPEG doesn't have a static size per frame, so don't pretend it has one
and fail when capturing because it doesn't match. Instead mark the size
as unknown and let the read frame grabbing method use a reasonable fallback
value (assuming that's only for actual streaming formats)
Fixes bug #628349.
The format list should be sorted from high ranks to low ranks. In the GSList
sorting function this means the compare needs to return a positive value if
format a has a lower rank than format b.
Among other things this fixes v4l2src to prefer non-emulated formats
to emulated formats when built against libv4l.
This allows set_caps to succeed if caps change in a way that
would not modify the format we're getting from the hardware.
Otherwise if not in NULL state, setting caps would fail
with EBUSY.
With this change, in some cases it's OK to go PLAYING->READY->PLAYING
rather than PLAYING->NULL->PLAYING to avoid a time-consuming close
and reopen of the device.
Fixes#621723
Clear format list and probed caps when going to NULL so if a new device
is set we'll probe the formats again instead of using previously
detected ones. Fixes bug #591747.
This also does the following changes:
(1) pull the bufferpool code out into gstv4l2bufferpool.c, and make a
bit more generic so it can be used both for v4l2src and v4l2sink
(2) move some of the device probing/configuration/caps stuff into
gstv4l2object.c so it does not have to be duplicated between
v4l2src and v4l2sink
Fixes bug #590280.
Use GstPoll to wait for the fd of the video device to become readable before
trying to capture a frame. This speeds up stopping v4l2src a lot as it no
longer has to wait for the next frame, especially when capturing with low
framerates or when the video device just never generates a frame (which seems a
common issue for uvcvideo devices)
Fixes bug #563574.
Original commit message from CVS:
* sys/v4l2/gstv4l2object.c:
* sys/v4l2/gstv4l2src.c:
* sys/v4l2/gstv4l2src.h:
* sys/v4l2/v4l2_calls.c:
* sys/v4l2/v4l2src_calls.c:
Fix memory leaks. Small code cleanups : No need for empty _init(). No
need to memset instance structures. Some more FIXME's.
Original commit message from CVS:
Patch by: Mike Ruprecht <cmaiku at gmail dot com>
* sys/v4l2/gstv4l2object.c: (gst_v4l2_class_probe_devices):
Reprobe devices again instead of taking a cached list as new
devices could've been plugged in. Fixes bug #549062.
Original commit message from CVS:
2007-05-30 Andy Wingo <wingo@pobox.com>
* sys/v4l2/gstv4l2object.h:
* sys/v4l2/gstv4l2object.c (gst_v4l2_object_new): Revert some
unintended changes.
Original commit message from CVS:
2007-05-30 Andy Wingo <wingo@pobox.com>
* sys/v4l2/v4l2src_calls.h:
* sys/v4l2/v4l2src_calls.c (gst_v4l2src_fill_format_list): Store
the format list in the order that the driver gives it to us.
(gst_v4l2src_probe_caps_for_format_and_size)
(gst_v4l2src_probe_caps_for_format): New functions, fill GstCaps
based on the capabilities of the device.
(gst_v4l2src_grab_frame): Update for object variable renaming.
(gst_v4l2src_set_capture): Update to be strict in its parameters,
as in the set_caps below.
(gst_v4l2src_capture_init): Update for object variable renaming,
and reflow.
(gst_v4l2src_capture_start, gst_v4l2src_capture_stop)
(gst_v4l2src_capture_deinit): Update for object variable renaming.
(gst_v4l2src_update_fps, gst_v4l2src_set_fps)
(gst_v4l2src_get_fps): Remove; these functions don't have much
meaning outside of an atomic set_caps method.
(gst_v4l2src_buffer_new): Don't set buffer duration, it is not
known.
* sys/v4l2/gstv4l2tuner.c (gst_v4l2_tuner_set_channel): Remove
call to update_fps; not sure about this change.
(gst_v4l2_tuner_set_norm): Work around the fact that for the
moment we don't have an update_fps_func.
* sys/v4l2/gstv4l2src.h (struct _GstV4l2Src): Don't put v4l2
structures in the object, just store what we need. Do store the
probed caps of the device. Don't store the current frame rate.
* sys/v4l2/gstv4l2src.c (gst_v4l2src_init): Remove the
update_fps_function, for now. Update for new object variable
naming.
(gst_v4l2src_set_property, gst_v4l2src_get_property): Update for
new object variable naming.
(gst_v4l2src_v4l2fourcc_to_structure): Rename from ..._to_caps.
(gst_v4l2_structure_to_v4l2fourcc): Rename from ...caps_to_....
(gst_v4l2src_get_caps): Rework to probe the device for supported
frame sizes and frame rates.
(gst_v4l2src_set_caps): Rework to be strict in the given
parameters: if someone asks us to have a certain size and rate,
that is what we configure.
(gst_v4l2src_get_read): Update for object variable naming. Don't
leak buffers on short reads.
(gst_v4l2src_get_mmap): Update for object variable naming, and add
comments.
(gst_v4l2src_create): Update for object variable naming.
Original commit message from CVS:
* sys/v4l2/gstv4l2object.c:
(gst_v4l2_object_install_properties_helper),
(gst_v4l2_object_set_property_helper),
(gst_v4l2_object_get_property_helper), (gst_v4l2_set_defaults):
* sys/v4l2/gstv4l2object.h:
* sys/v4l2/gstv4l2src.c: (gst_v4l2src_class_init),
(gst_v4l2src_init), (gst_v4l2src_set_property),
(gst_v4l2src_get_property), (gst_v4l2src_set_caps):
* sys/v4l2/v4l2src_calls.c: (gst_v4l2src_fill_format_list),
(gst_v4l2src_grab_frame), (gst_v4l2src_set_capture),
(gst_v4l2src_capture_init), (gst_v4l2src_capture_start),
(gst_v4l2src_capture_deinit):
Fix EIO handing when capturing. Add new property to specify the number of
buffers to enque (and remove the borked num-buffers usage).
Original commit message from CVS:
* sys/v4l2/gstv4l2object.c:
(gst_v4l2_object_install_properties_helper):
comment out the properties that are already part of the tuner
interface.
Original commit message from CVS:
Patch by: Martin Szulecki
* sys/v4l2/gstv4l2object.c: (gst_v4l2_object_get_property_helper):
If "device-name" is requested and the device is not
open, try to temporarily open it to obtain this
information (#342494).
