Updated gst_segment_position_from_stream_time and gst_segment_to_stream_time to reflect correct calculations for the case when the applied rate is negative.
Pasting from design docs:
===============================
Stream time is calculated using the buffer times and the preceding SEGMENT
event as follows:
stream_time = (B.timestamp - S.start) * ABS (S.applied_rate) + S.time
For negative rates, B.timestamp will go backwards from S.stop to S.start,
making the stream time go backwards.
===============================
Therefore, the calculation for applied_rate < 0 should be:
stream_time = (S.stop - B.timestamp) * ABS (S.applied_rate) + S.time
and the reverse:
B.timestamp = S.stop - (stream_time - S.time) / ABS (S.applied_rate)
https://bugzilla.gnome.org/show_bug.cgi?id=756810
The previous change (see bgo #756069) was causing us to free the same pointer
multiple times. If we actually get a sample back, the test fails, no need to
free anything in that case.
The default padding I introduced in d4f81fb4e6 is
actually only 4 pointers and on 32bit platforms already smaller than the union.
Replace it with a fixed 64byte padding. Don't add the normal padding for now.
Fixes#755822
While this technically is an abi break, we decided to do this:
1) the struct is documented to be internal
2) the struct is alloced and freed inside the library
3) there are no public methods that receive or return instances
4) the only code known to use this struct are classes containd here
When adding an element to a bin we need to propagate the GstContext's
to/from the element.
This moves the GstContext list from GstBin to GstElement and adds
convenience functions to get the currently set list of GstContext's.
This does not deal with the collection of GstContext's propagated
using GST_CONTEXT_QUERY. Element subclasses are advised to call
gst_element_set_context if they need to propagate GstContext's
received from the context query.
https://bugzilla.gnome.org/show_bug.cgi?id=705579
gst_segment_to_position might cause confusion, especially with the addition of
gst_segment_position_from_stream_time . Deprecated gst_segment_to_position
now, and replaced it with gst_segment_position_from_running_time.
Also added unit tests.
Iterator may need to be resynced, for instance if pads are released
during state change.
got_eos should be protected by the object lock of the element, not of
the pad, as is the case throughout the rest of the funnel code.
https://bugzilla.gnome.org/show_bug.cgi?id=755343
In order for gst_harness_new_full to be MT-safe the increase and
decrease of HARNESS_REF must be MT-safe. This allows for creating
multiple harnesses from different threads wrapping the same element.
https://bugzilla.gnome.org/show_bug.cgi?id=754661
As this test is using a short sleep (GST_USECOND, which is 10ms
in microsecond), sometimes that EOS event is received before the
loop in basesrc have run _do_seek() and pushed the update segment.
To solve this issue, we wait for the initial segment (and flush it)
then we wait for the second segment before sending EOS.
https://bugzilla.gnome.org/show_bug.cgi?id=753365
In some cases, probes might want to handle the buffer/event/query
themselves and stop the data from travelling further downstream.
While this was somewhat possible with buffer/events and using
GST_PROBE_DROP, it was not applicable to queries, and would result
in the query failing.
With this new GST_PROBE_HANDLED value, the buffer/event/query will
be considered as successfully handled, will not be pushed further
and the appropriate return value (TRUE or GST_FLOW_OK) will be returned
This also allows probes to return a non-default GstFlowReturn when dealing
with buffer push. This can be done by setting the
GST_PAD_PROBE_INFO_FLOW_RETURN() field accordingly
https://bugzilla.gnome.org/show_bug.cgi?id=748643
If no date and only a time is given in gst_date_time_new_from_iso8601_string(),
assume that it is "today" and try to parse the time-only string. "Today" is
assumed to be in the timezone provided by the user (if any), otherwise Z -
just like the behavior of the existing code.
https://bugzilla.gnome.org/show_bug.cgi?id=753455
To be able to disable the slightly "magic" forwarding of the
necessary events between the harnesses.
Also introduce a new test-suite for GstHarness, that documents the
feature, and should hopefully expand into documenting most of the
features the harness possesses.
https://bugzilla.gnome.org/show_bug.cgi?id=752746
Writing a test for unscheduling the gst_clock_id_wait inside the
identity element, found an invalid read, caused by removing the clock-id
when calling _unschedule instead of letting the code calling _wait remove
the clock-id after being unscheduled.
https://bugzilla.gnome.org/show_bug.cgi?id=752055
The check for the presence of the parent in the presence of
the NEED_PARENT flag was missing for the chain function. Also keep
a ref on the parent in case the pad is removed mid-chain.
test_intersect_flagset fails because when caps is being
created, flags and mask are being cast to uint64 while
they should be uint. This results in invalid memory access
or a segfault.
https://bugzilla.gnome.org/show_bug.cgi?id=751628
Adds tests for gst_element_get_compatible_pad for when it has to
request pads.
Note that these tests don't cover the case when it has to request
a pad that already exists.
https://bugzilla.gnome.org/show_bug.cgi?id=751235
Make gst_collect_pads_clip_running_time() function also store the
signed DTS in the CollectData. This signed DTS value can be used by
muxers to properly handle streams where DTS can be negative initially.
https://bugzilla.gnome.org/show_bug.cgi?id=740575
Allow for sub-classes which want to collate incoming buffers or
split them into multiple output buffers by separating the input
buffer submission from output buffer generation and allowing
for looping of one of the phases depending on pull or push mode
operation.
https://bugzilla.gnome.org/show_bug.cgi?id=750033
gst/gstmemory.c:570:38: error: implicit conversion from enumeration type 'GstMapFlags' to different enumeration
type 'GstLockFlags' [-Werror,-Wenum-conversion]
fail_unless (gst_memory_lock (mem, GST_MAP_WRITE));
~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~
Now that locking exclusively dows not always succeed, we need to signal
the failure case from gst_memory_init.
Rather than introducing an API or funcionality change to gst_memory_init,
workaround by checking exclusivity in the calling code.
https://bugzilla.gnome.org/show_bug.cgi?id=750172
gst_memory_lock (mem, WRITE | EXCLUSIVE);
gst_memory_lock (mem, WRITE | EXCLUSIVE);
Succeeds when the part-miniobject.txt design doc suggests that this should fail:
"A gst_mini_object_lock() can fail when a WRITE lock is requested and
the exclusive counter is > 1. Indeed a GstMiniObject object with an
exclusive counter 1 is locked EXCLUSIVELY by at least 2 objects and is
therefore not writable."
https://bugzilla.gnome.org/show_bug.cgi?id=750172
GstFlagSet is a new type designed for negotiating sets
of boolean capabilities flags, consisting of a 32-bit
flags bitfield and 32-bit mask field. The mask field
indicates which of the flags bits an element needs to have
as specific values, and which it doesn't care about.
This allows efficient negotiation of arrays of boolean
capabilities.
The standard serialisation format is FLAGS:MASK, with
flags and mask fields expressed in hexadecimal, however
GstFlagSet has a gst_register_flagset() function, which
associates a new GstFlagSet derived type with an existing
GFlags gtype. When serializing a GstFlagSet with an
associated set of GFlags, it also serializes a human-readable
form of the flags for easier debugging.
It is possible to parse a GFlags style serialisation of a
flagset, without the hex portion on the front. ie,
+flag1/flag2/flag3+flag4, to indicate that
flag1 & flag4 must be set, and flag2/flag3 must be unset,
and any other flags are don't-care.
https://bugzilla.gnome.org/show_bug.cgi?id=746373
The old gst_object_has_ancestor will call the new code. This establishes the
symetry with the new gst_object_has_as_parent.
API: gst_object_has_as_ancestor()
gst_debug_unset_threshold_for_name() used to go into an
infinite loop when there was more than one category in
the list. This test captures the problem by failing
via timeout.
https://bugzilla.gnome.org/show_bug.cgi?id=748321
In order to support some types of protected streams (such as those
protected using DASH Common Encryption) some per-buffer information
needs to be passed between elements.
This commit adds a GstMeta type called GstProtectionMeta that allows
protection specific information to be added to a GstBuffer. An example
of its usage is qtdemux providing information to each output sample
that enables a downstream element to decrypt it.
This commit adds a utility function to select a supported protection
system from the installed Decryption elements found in the registry.
The gst_protection_select_system function that takes an array of
identifiers and searches the registry for a element of klass Decryptor that
supports one or more of the supplied identifiers. If multiple elements
are found, the one with the highest rank is selected.
This commit adds a unit test for the gst_protection_select_system
function that adds a fake Decryptor element to the registry and then
checks that it can correctly be selected by the utility function.
This commit adds a unit test for GstProtectionMeta that creates
GstProtectionMeta and adds & removes it from a buffer and performs some
simple reference count checks.
API: gst_buffer_add_protection_meta()
API: gst_buffer_get_protection_meta()
API: gst_protection_select_system()
API: gst_protection_meta_api_get_type()
API: gst_protection_meta_get_info()
https://bugzilla.gnome.org/show_bug.cgi?id=705991
In order for a decrypter element to decrypt media protected using a
specific protection system, it first needs all the protection system
specific information necessary (E.g. information on how to acquire
the decryption keys) for that stream.
The GST_EVENT_PROTECTION defined in this commit enables this information
to be passed from elements that extract it (e.g. qtdemux, dashdemux) to
elements that use it (E.g. a decrypter element).
API: GST_EVENT_PROTECTION
API: gst_event_new_protection()
API: gst_event_parse_protection()
https://bugzilla.gnome.org/show_bug.cgi?id=705991
Only save the messages we're interested in and expecting.
When run with *:9 we might get additional TRACE level
messages from other categories and then we don't end up
with the number of messages we expect.
This tests add an idle probe on an idle pad from a separate thread
so that the callback is called immediatelly. This callback will sit
still and then we try to push a buffer on this same pad. It verifies
that the idle probe blocks data passing
https://bugzilla.gnome.org/show_bug.cgi?id=747852
When a bin changes states upwards, and a child fails to change,
any child that was already switched will not be reset to its
original state, leaving its state inconsistent with the bin,
which does not change state due to the failure.
If the state change was from NULL to READY, it means that deleting
this bin will cause those children to be deleted while not in
NULL state, which is a Bad Thing. For other upward changes, it
is less of a problem, as a subsequent switch back to NULL will
cause an actual downwards change on those inconsistent elements,
albeit from the "wrong" state.
We now reset state to the original one when a child fails.
Includes unit test.
https://bugzilla.gnome.org/show_bug.cgi?id=747610
Use case: we want to block the source pad of a leaky queue and
drop the buffer that causes the block. If we return PROBE_DROP
then the buffer gets dropped, but we get called again. If we
return PROBE_OK we can't easily drop the buffer. If we just
replace the item into the GstPadProbeInfo structure with NULL,
GStreamer will push a NULL buffer to the next element when we
unblock the pad probe. This patch ensures it doesn't do that.
https://bugzilla.gnome.org/show_bug.cgi?id=734342
Update test_seeking testcase to verify the render and render_list
virtual method handle buffers and buffer list containing multiple
memory blocks correctly.
https://bugzilla.gnome.org/show_bug.cgi?id=747223
GstFileSink implements the render_list virtual method to render
a list of buffers. Update the test_seeking test case to also
check the render_list method implementation.
https://bugzilla.gnome.org/show_bug.cgi?id=747100
Don't unwrap strings that start but don't finish with a double quote. If a
string is delimited by two quotes we unescape them and any special characters
in the middle (like \" or \\). If the first character or the last character
aren't a quote we assume it's part of an unescaped string.
Moved some deserialize_string unit tests because we don't try to unwrap strings
missing that second quote anymore.
https://bugzilla.gnome.org/show_bug.cgi?id=688625
Otherwise baseparse will consider empty streams to be an error while
an empty stream is a valid scenario. With this patch, errors would
only be emitted if the parser received data but wasn't able to
produce any output from it.
This change is only for push-mode operation as in pull mode an
empty file can be considered an error for the one driving the
pipeline
Includes a unit test for it
https://bugzilla.gnome.org/show_bug.cgi?id=733171
This property avoids not linked error when all the pads are unlinked
or when there are no source pads. This is useful in dynamic pipelines
where it can happen that for a short time there are no pads at all or
all downstream pads are not linked yet.
https://bugzilla.gnome.org/show_bug.cgi?id=746436
3 new tests:
1) Tests that a stream that is empty (just an EOS event)
on inactive pad doesn't get through and tamper
with the active pad that still has data
2) Tests that a stream that is shorter than the active one
(pushes EOS earlier) doesn't has its EOS pushed
3) Tests that switching to an inactive stream that has received
EOS will make input-selector push EOS
https://bugzilla.gnome.org/show_bug.cgi?id=746518
Do not do any checks for the start/stop in the new
gst_segment_to_running_time_full() method, we can let this be done by
the more capable gst_segment_clip() method. This allows us to remove the
enum of results and only return the sign of the calculated running-time.
We need to put the old clipping checks in the old
gst_segment_to_running_time() still because they work slightly
differently than the _clip methods.
See https://bugzilla.gnome.org/show_bug.cgi?id=740575
Add a clip argument to gst_segment_to_running_time_full() to disable
the checks against the segment boundaries. This makes it possible to
generate an extrapolated running-time for timestamps outside of the
segment.
See https://bugzilla.gnome.org/show_bug.cgi?id=740575
Add a helper method to get a running-time with a little more features
such as detecting if the value was before or after the segment and
negative running-time.
API: gst_segment_to_running_time_full()
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=740575
The position in the segment is relative to the start but the offset
isn't, so subtract the start from the position when setting the offset.
Add unit test for this as well.
Don't stop the pool in set_config(). Instead, let the controlling
element manage it. Most of the time, when an active pool is being
configured is because the caps didn't change.
https://bugzilla.gnome.org/show_bug.cgi?id=745377
A variant of gst_buffer_copy that forces the underlying memory
to be copied.
This is added to avoid adding an extra reference to a GstMemory
that might belong to a bufferpool that is trying to be drained.
The use case is when the buffer copying is done to release the
old buffer and all its resources.
https://bugzilla.gnome.org/show_bug.cgi?id=745287
Demultiplex a stream to multiple source pads based on the stream ids from the
stream-start events. This basically reverses the behaviour of funnel.
https://bugzilla.gnome.org/show_bug.cgi?id=707605
This reverts commit 1911554cff.
This breaks the functionality of GST_PAD_FLAG_NEED_PARENT, the reason for this
flag is that if a pad is removed from a running element, you don't want
functions (such as chain or event) to be called on the pad without a parent set.
This can happen if you remove a request or sometimes pad from a running element.
I don't see the code that caused this in tsdemux, but if it needs to unset
the flag on remove, it should do it itself and then make sure that the parent
exists in any pad function.
Add domain checks for the input values, and a variable precision
calculation that loops if necessary to ensure we never overflow
accumulators and then silently produce garbage results.
Make the (non-public) linear regression function available for
unit testing by putting it in a separate source file the test
can include. Add a unit test that the new regression function
produces sensible results for several inputs taken from real-world
captures.
Pools are allowed to change the size in order to adapt padding. So
don't check the size. Normally pool will change the size without
failing set_config(), but it they endup changing the size before
the validate method may fail on a false positive.
https://bugzilla.gnome.org/show_bug.cgi?id=741420
If a task thread is calling pause on it self and the
controlling/"main" thread stops the task, it could end in a race
where gst_task_func loops and then checks for paused after the
controlling thread just changed the task state to stopped.
Hence the task would actually call func again even though it was
both paused and stopped.
https://bugzilla.gnome.org/show_bug.cgi?id=740001
In this mode we accept previously set filter caps until
upstream renegotiates to something that is compatible
to the current filter caps.
This allows dynamic caps changes in the pipeline even
if there is a queue between any conversion element
and the capsfilter. Without this we would get not-negotiated
errors if timing is bad.
https://bugzilla.gnome.org/show_bug.cgi?id=739002
Use an array of constant strings so if arguments get
removed from it they are not considered leaked, and
valgrind is happy. Still some stuff leaking in GLib
though.
Make pipe socket non-blocking, so we don't
end up being blocked in a write on the pipe
while the src is eos and not reading data
any more, and thus we never unblock and never
notice that we're done. This would happen
quite reliably on the rpi.
Adds API to get or peek a sub-reader of a certain size from
a given byte reader. This is useful when parsing nested chunks,
one can easily get a byte reader for a sub-chunk and make
sure one never reads beyond the sub-chunk boundary.
API: gst_byte_reader_peek_sub_reader()
API: gst_byte_reader_get_sub_reader()
Adds gst_byte_reader_masked_scan_uint32_peek just like
GstAdapter has a _peek and non _peek version
Upgraded tests to check that the returned value is correct in the
_peek version
API: gst_byte_reader_masked_scan_uint32_peek
https://bugzilla.gnome.org/show_bug.cgi?id=728356
Compliments my previous patch for gst_caps_set_features, which would
previously assert and leak the old GstCapsFeatures if the caps already
had a GstCapsFeatures and you were trying to replace it with a new one.
When no data is coming from sinkpads and eos events
arrived at one of the sinkpad, funnel forwards the EOS
event to downstream. It forwards the EOS because lastsink pad
is NULL. Also the unit testcase of the funnel is not checking
the correct behavior as it should. The unit test case should
fail if one of the sink pad has already EOS present on it and
we are trying to push one more EOS.
https://bugzilla.gnome.org/show_bug.cgi?id=731716
Otherwise negative values will sets all of the 64 bits due to two's
complement's definition of negative values.
Also add a test for negative int ranges.
When a pad is added the need-parent flag is set to true, so when
they are removed the flag should be set back to false
This was preventing GstPads to be reused in elements (removed and
later re-added). A unit tests was added to verify that this is
working now.
The use case is tsdemux that has a program-number property and
allows the user to switch programs. In order to do that tsdemux
will remove the pads of the current program and add from the new
ones. The removed pads are kept in the demuxer for later if the
user selects the old program again.
Adds a utility struct that is capable of storing and aggregating flow returns
associated with pads.
This way all demuxers will have a standard function to use and have the
same expected results.
Includes tests.
https://bugzilla.gnome.org/show_bug.cgi?id=709224
Stores the last result of a gst_pad_push or a pull on the GstPad and provides
a getter and a macro to access this field.
Whenever the pad is inactive it is set to FLUSHING
API: gst_pad_get_last_flow_return
https://bugzilla.gnome.org/show_bug.cgi?id=709224
