gstreamer/subprojects/gst-editing-services/ges/ges-base-effect.c

430 lines
14 KiB
C
Raw Normal View History

/* GStreamer Editing Services
* Copyright (C) 2010 Thibault Saunier <tsaunier@gnome.org>
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Library General Public
* License as published by the Free Software Foundation; either
* version 2 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Library General Public License for more details.
*
* You should have received a copy of the GNU Library General Public
* License along with this library; if not, write to the
2012-11-04 00:25:20 +00:00
* Free Software Foundation, Inc., 51 Franklin St, Fifth Floor,
* Boston, MA 02110-1301, USA.
*/
/**
* SECTION:gesbaseeffect
* @title: GESBaseEffect
* @short_description: adds an effect to a stream in a GESSourceClip or a
* GESLayer
*
* A #GESBaseEffect is some operation that applies an effect to the data
* it receives.
*
* ## Time Effects
*
* Some operations will change the timing of the stream data they receive
* in some way. In particular, the #GstElement that they wrap could alter
* the times of the segment they receive in a #GST_EVENT_SEGMENT event,
* or the times of a seek they receive in a #GST_EVENT_SEEK event. Such
* operations would be considered time effects since they translate the
* times they receive on their source to different times at their sink,
* and vis versa. This introduces two sets of time coordinates for the
* event: (internal) sink coordinates and (internal) source coordinates,
* where segment times are translated from the sink coordinates to the
* source coordinates, and seek times are translated from the source
* coordinates to the sink coordinates.
*
* If you use such an effect in GES, you will need to inform GES of the
* properties that control the timing with
* ges_base_effect_register_time_property(), and the effect's timing
* behaviour using ges_base_effect_set_time_translation_funcs().
*
* Note that a time effect should not have its
* #GESTrackElement:has-internal-source set to %TRUE.
*
* In addition, note that GES only *fully* supports time effects whose
* mapping from the source to sink coordinates (those applied to seeks)
* obeys:
*
* + Maps the time `0` to `0`. So initial time-shifting effects are
* excluded.
* + Is monotonically increasing. So reversing effects, and effects that
* jump backwards in the stream are excluded.
* + Can handle a reasonable #GstClockTime, relative to the project. So
* this would exclude a time effect with an extremely large speed-up
* that would cause the converted #GstClockTime seeks to overflow.
* + Is 'continuously reversible'. This essentially means that for every
* time in the sink coordinates, we can, to 'good enough' accuracy,
* calculate the corresponding time in the source coordinates. Moreover,
* this should correspond to how segment times are translated from
* sink to source.
* + Only depends on the registered time properties, rather than the
* state of the #GstElement or the data it receives. This would exclude,
* say, an effect that would speedup if there is more red in the image
* it receives.
*
* Note that a constant-rate-change effect that is not extremely fast or
* slow would satisfy these conditions. For such effects, you may wish to
* use ges_effect_class_register_rate_property().
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include <glib/gprintf.h>
#include "ges-utils.h"
#include "ges-internal.h"
#include "ges-track-element.h"
2013-01-26 15:35:19 +00:00
#include "ges-base-effect.h"
typedef struct _TimePropertyData
{
gchar *property_name;
GObject *child;
GParamSpec *pspec;
} TimePropertyData;
static void
_time_property_data_free (gpointer data_p)
{
TimePropertyData *data = data_p;
g_free (data->property_name);
gst_object_unref (data->child);
g_param_spec_unref (data->pspec);
g_free (data);
}
2013-01-26 15:35:19 +00:00
struct _GESBaseEffectPrivate
{
GList *time_properties;
GESBaseEffectTimeTranslationFunc source_to_sink;
GESBaseEffectTimeTranslationFunc sink_to_source;
gpointer translation_data;
GDestroyNotify destroy_translation_data;
};
G_DEFINE_ABSTRACT_TYPE_WITH_PRIVATE (GESBaseEffect, ges_base_effect,
GES_TYPE_OPERATION);
static gboolean
ges_base_effect_set_child_property_full (GESTimelineElement * element,
GObject * child, GParamSpec * pspec, const GValue * value, GError ** error)
{
GESClip *parent = GES_IS_CLIP (element->parent) ?
GES_CLIP (element->parent) : NULL;
if (parent && !ges_clip_can_set_time_property_of_child (parent,
GES_TRACK_ELEMENT (element), child, pspec, value, error)) {
GST_INFO_OBJECT (element, "Cannot set time property '%s::%s' "
"because the parent clip %" GES_FORMAT " would not allow it",
G_OBJECT_TYPE_NAME (child), pspec->name, GES_ARGS (parent));
return FALSE;
}
return
GES_TIMELINE_ELEMENT_CLASS
(ges_base_effect_parent_class)->set_child_property_full (element, child,
pspec, value, error);
}
static void
ges_base_effect_dispose (GObject * object)
{
GESBaseEffectPrivate *priv = GES_BASE_EFFECT (object)->priv;
g_list_free_full (priv->time_properties, _time_property_data_free);
priv->time_properties = NULL;
if (priv->destroy_translation_data)
priv->destroy_translation_data (priv->translation_data);
priv->destroy_translation_data = NULL;
priv->source_to_sink = NULL;
priv->sink_to_source = NULL;
G_OBJECT_CLASS (ges_base_effect_parent_class)->dispose (object);
}
static void
2013-01-26 15:35:19 +00:00
ges_base_effect_class_init (GESBaseEffectClass * klass)
{
GObjectClass *object_class = G_OBJECT_CLASS (klass);
GESTimelineElementClass *element_class = GES_TIMELINE_ELEMENT_CLASS (klass);
object_class->dispose = ges_base_effect_dispose;
element_class->set_child_property_full =
ges_base_effect_set_child_property_full;
}
static void
2013-01-26 15:35:19 +00:00
ges_base_effect_init (GESBaseEffect * self)
{
self->priv = ges_base_effect_get_instance_private (self);
}
static void
_child_property_removed (GESTimelineElement * element, GObject * child,
GParamSpec * pspec, gpointer user_data)
{
GList *tmp;
GESBaseEffectPrivate *priv = GES_BASE_EFFECT (element)->priv;
for (tmp = priv->time_properties; tmp; tmp = tmp->next) {
TimePropertyData *data = tmp->data;
if (data->child == child && data->pspec == pspec) {
priv->time_properties = g_list_remove (priv->time_properties, data);
_time_property_data_free (data);
return;
}
}
}
/**
* ges_base_effect_register_time_property:
* @effect: A #GESBaseEffect
* @child_property_name: The name of the child property to register as
* a time property
*
* Register a child property of the effect as a property that, when set,
* can change the timing of its input data. The child property should be
* specified as in ges_timeline_element_lookup_child().
*
* You should also set the corresponding time translation using
* ges_base_effect_set_time_translation_funcs().
*
* Note that @effect must not be part of a clip, nor can it have
* #GESTrackElement:has-internal-source set to %TRUE.
*
* Returns: %TRUE if the child property was found and newly registered.
* Since: 1.18
*/
gboolean
ges_base_effect_register_time_property (GESBaseEffect * effect,
const gchar * child_property_name)
{
GESTimelineElement *element;
GESTrackElement *el;
GParamSpec *pspec;
GObject *child;
GList *tmp;
TimePropertyData *data;
g_return_val_if_fail (GES_IS_BASE_EFFECT (effect), FALSE);
el = GES_TRACK_ELEMENT (effect);
element = GES_TIMELINE_ELEMENT (el);
g_return_val_if_fail (element->parent == NULL, FALSE);
g_return_val_if_fail (ges_track_element_has_internal_source (el) == FALSE,
FALSE);
if (!ges_timeline_element_lookup_child (element, child_property_name,
&child, &pspec))
return FALSE;
for (tmp = effect->priv->time_properties; tmp; tmp = tmp->next) {
data = tmp->data;
if (data->child == child && data->pspec == pspec) {
GST_WARNING_OBJECT (effect, "Already registered the time effect for %s",
child_property_name);
g_object_unref (child);
g_param_spec_unref (pspec);
return FALSE;
}
}
ges_track_element_set_has_internal_source_is_forbidden (el);
data = g_new0 (TimePropertyData, 1);
data->child = child;
data->pspec = pspec;
data->property_name = g_strdup (child_property_name);
effect->priv->time_properties =
g_list_prepend (effect->priv->time_properties, data);
g_signal_handlers_disconnect_by_func (effect, _child_property_removed, NULL);
g_signal_connect (effect, "child-property-removed",
G_CALLBACK (_child_property_removed), NULL);
return TRUE;
}
/**
* ges_base_effect_set_time_translation_funcs:
* @effect: A #GESBaseEffect
* @source_to_sink_func: (nullable) (scope notified) (closure user_data): The
* function to use for querying how a time is translated from the source
* coordinates to the sink coordinates of @effect
* @sink_to_source_func: (nullable) (scope notified) (closure user_data): The
* function to use for querying how a time is translated from the sink
* coordinates to the source coordinates of @effect
* @user_data: Data to pass to both @source_to_sink_func and
* @sink_to_source_func
* @destroy: (destroy user_data) (nullable): Method to call to destroy
* @user_data, or %NULL
*
* Set the time translation query functions for the time effect. If an
* effect is a time effect, it will have two sets of coordinates: one
* at its sink and one at its source. The given functions should be able
* to translate between these two sets of coordinates. More specifically,
* @source_to_sink_func should *emulate* how the corresponding #GstElement
* would translate the #GstSegment @time field, and @sink_to_source_func
* should emulate how the corresponding #GstElement would translate the
* seek query @start and @stop values, as used in gst_element_seek(). As
* such, @sink_to_source_func should act as an approximate reverse of
* @source_to_sink_func.
*
* Note, these functions will be passed a table of time properties, as
* registered in ges_base_effect_register_time_property(), and their
* values. The functions should emulate what the translation *would* be
* *if* the time properties were set to the given values. They should not
* use the currently set values.
*
* Note that @effect must not be part of a clip, nor can it have
* #GESTrackElement:has-internal-source set to %TRUE.
*
* Returns: %TRUE if the translation functions were set.
* Since: 1.18
*/
gboolean
ges_base_effect_set_time_translation_funcs (GESBaseEffect * effect,
GESBaseEffectTimeTranslationFunc source_to_sink_func,
GESBaseEffectTimeTranslationFunc sink_to_source_func,
gpointer user_data, GDestroyNotify destroy)
{
GESTimelineElement *element;
GESTrackElement *el;
GESBaseEffectPrivate *priv;
g_return_val_if_fail (GES_IS_BASE_EFFECT (effect), FALSE);
element = GES_TIMELINE_ELEMENT (effect);
el = GES_TRACK_ELEMENT (element);
g_return_val_if_fail (element->parent == NULL, FALSE);
g_return_val_if_fail (ges_track_element_has_internal_source (el) == FALSE,
FALSE);
ges_track_element_set_has_internal_source_is_forbidden (el);
priv = effect->priv;
if (priv->destroy_translation_data)
priv->destroy_translation_data (priv->translation_data);
priv->translation_data = user_data;
priv->destroy_translation_data = destroy;
priv->source_to_sink = source_to_sink_func;
priv->sink_to_source = sink_to_source_func;
return TRUE;
}
/**
* ges_base_effect_is_time_effect:
* @effect: A #GESBaseEffect
*
* Get whether the effect is considered a time effect or not. An effect
* with registered time properties or set translation functions is
* considered a time effect.
*
* Returns: %TRUE if @effect is considered a time effect.
* Since: 1.18
*/
gboolean
ges_base_effect_is_time_effect (GESBaseEffect * effect)
{
GESBaseEffectPrivate *priv;
g_return_val_if_fail (GES_IS_BASE_EFFECT (effect), FALSE);
priv = effect->priv;
if (priv->time_properties || priv->source_to_sink || priv->sink_to_source)
return TRUE;
return FALSE;
}
gchar *
ges_base_effect_get_time_property_name (GESBaseEffect * effect,
GObject * child, GParamSpec * pspec)
{
GList *tmp;
for (tmp = effect->priv->time_properties; tmp; tmp = tmp->next) {
TimePropertyData *data = tmp->data;
if (data->pspec == pspec && data->child == child)
return g_strdup (data->property_name);
}
return NULL;
}
static void
_gvalue_free (gpointer data)
{
GValue *val = data;
g_value_unset (val);
g_free (val);
}
GHashTable *
ges_base_effect_get_time_property_values (GESBaseEffect * effect)
{
GList *tmp;
GHashTable *ret =
g_hash_table_new_full (g_str_hash, g_str_equal, g_free, _gvalue_free);
for (tmp = effect->priv->time_properties; tmp; tmp = tmp->next) {
TimePropertyData *data = tmp->data;
GValue *value = g_new0 (GValue, 1);
/* FIXME: once we move to GLib 2.60, g_object_get_property() will
* automatically initialize the type */
g_value_init (value, data->pspec->value_type);
g_object_get_property (data->child, data->pspec->name, value);
g_hash_table_insert (ret, g_strdup (data->property_name), value);
}
return ret;
}
GstClockTime
ges_base_effect_translate_source_to_sink_time (GESBaseEffect * effect,
GstClockTime time, GHashTable * time_property_values)
{
GESBaseEffectPrivate *priv = effect->priv;
if (!GST_CLOCK_TIME_IS_VALID (time))
return GST_CLOCK_TIME_NONE;
if (priv->source_to_sink)
return priv->source_to_sink (effect, time, time_property_values,
priv->translation_data);
if (time_property_values && g_hash_table_size (time_property_values))
GST_ERROR_OBJECT (effect, "The time effect is missing its source to "
"sink translation function");
return time;
}
GstClockTime
ges_base_effect_translate_sink_to_source_time (GESBaseEffect * effect,
GstClockTime time, GHashTable * time_property_values)
{
GESBaseEffectPrivate *priv = effect->priv;
if (!GST_CLOCK_TIME_IS_VALID (time))
return GST_CLOCK_TIME_NONE;
if (priv->sink_to_source)
return effect->priv->sink_to_source (effect, time, time_property_values,
priv->translation_data);
if (time_property_values && g_hash_table_size (time_property_values))
GST_ERROR_OBJECT (effect, "The time effect is missing its sink to "
"source translation function");
return time;
}