gstreamer/subprojects/gst-plugins-bad/tests/check/elements/h264parse.c

1377 lines
46 KiB
C
Raw Normal View History

/*
* GStreamer
*
* unit test for h264parse
*
* Copyright (C) 2011 Nokia Corporation. All rights reserved.
*
* Contact: Stefan Kost <stefan.kost@nokia.com>
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Library General Public
* License as published by the Free Software Foundation; either
* version 2 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Library General Public License for more details.
*
* You should have received a copy of the GNU Library General Public
* License along with this library; if not, write to the
* Free Software Foundation, Inc., 51 Franklin St, Fifth Floor,
* Boston, MA 02110-1301, USA.
*/
#include <gst/check/check.h>
#include <gst/video/video.h>
#include "gst-libs/gst/codecparsers/gsth264parser.h"
#include "parser.h"
#define SRC_CAPS_TMPL "video/x-h264, parsed=(boolean)false"
#define SINK_CAPS_TMPL "video/x-h264, parsed=(boolean)true"
GstStaticPadTemplate sinktemplate_bs_nal = GST_STATIC_PAD_TEMPLATE ("sink",
GST_PAD_SINK,
GST_PAD_ALWAYS,
GST_STATIC_CAPS (SINK_CAPS_TMPL
", stream-format = (string) byte-stream, alignment = (string) nal")
);
GstStaticPadTemplate sinktemplate_bs_au = GST_STATIC_PAD_TEMPLATE ("sink",
GST_PAD_SINK,
GST_PAD_ALWAYS,
GST_STATIC_CAPS (SINK_CAPS_TMPL
", stream-format = (string) byte-stream, alignment = (string) au")
);
GstStaticPadTemplate sinktemplate_avc_au = GST_STATIC_PAD_TEMPLATE ("sink",
GST_PAD_SINK,
GST_PAD_ALWAYS,
GST_STATIC_CAPS (SINK_CAPS_TMPL
", stream-format = (string) avc, alignment = (string) au")
);
h264parse: Add support for stream-format=avc3 When outputting in AVC3 stream format, the codec_data should not contain any SPS or PPS, because they are embedded inside the stream. In case of avc->bytestream h264parse will push the SPS and PPS from codec_data downstream at the start of the stream, at intervals controlled by "config-interval" and when there is a codec_data change. In the case of avc3->bytstream h264parse detects that there is already SPS/PPS in the stream and sets h264parse->push_codec to FALSE. Therefore avc3->bytstream was already supported, except for the stream type. In the case of bystream->avc h264parse will generate codec_data caps from the parsed SPS/PPS in the stream. However it does not remove these SPS/PPS from the stream. bytestream->avc3 is the same as bytestream->avc except that the codec_data must not have any SPS/PPS in it. |--------------+-------------+-------------------| |stream-format | SPS in-band | SPS in codec_data | |--------------+-------------+-------------------| | avc | maybe | always | |--------------+-------------+-------------------| | avc3 | always | never | |--------------+-------------+-------------------| Amendment 2 of ISO/IEC 14496-15 (AVC file format) is defining a new structure for fragmented MP4 called "avc3". The principal difference between AVC1 and AVC3 is the location of the codec initialisation data (e.g. SPS, PPS). In AVC1 this data is placed in the initial MOOV box (moov.trak.mdia.minf.stbl.stsd.avc1) but in AVC3 this data goes in the first sample of every fragment. https://bugzilla.gnome.org/show_bug.cgi?id=702004
2013-08-30 12:54:40 +00:00
GstStaticPadTemplate sinktemplate_avc3_au = GST_STATIC_PAD_TEMPLATE ("sink",
GST_PAD_SINK,
GST_PAD_ALWAYS,
GST_STATIC_CAPS (SINK_CAPS_TMPL
", stream-format = (string) avc3, alignment = (string) au")
);
GstStaticPadTemplate srctemplate = GST_STATIC_PAD_TEMPLATE ("src",
GST_PAD_SRC,
GST_PAD_ALWAYS,
GST_STATIC_CAPS (SRC_CAPS_TMPL)
);
/* some data */
/* AUD */
static guint8 h264_aud[] = {
0x00, 0x00, 0x00, 0x01, 0x09, 0xf0
};
/* SPS */
static guint8 h264_sps[] = {
0x00, 0x00, 0x00, 0x01, 0x67, 0x4d, 0x40, 0x15,
0xec, 0xa4, 0xbf, 0x2e, 0x02, 0x20, 0x00, 0x00,
0x03, 0x00, 0x2e, 0xe6, 0xb2, 0x80, 0x01, 0xe2,
0xc5, 0xb2, 0xc0
};
/* PPS */
static guint8 h264_pps[] = {
0x00, 0x00, 0x00, 0x01, 0x68, 0xeb, 0xec, 0xb2
};
/* SEI buffering_period() message */
static guint8 h264_sei_buffering_period[] = {
0x00, 0x00, 0x00, 0x01, 0x06, 0x00, 0x01, 0xc0
};
/* Content light level information SEI message */
static guint8 h264_sei_clli[] = {
0x00, 0x00, 0x00, 0x01, 0x06, 0x90, 0x04, 0x03, 0xe8, 0x01, 0x90, 0x80
};
/* Mastering display colour volume information SEI message */
static guint8 h264_sei_mdcv[] = {
0x00, 0x00, 0x00, 0x01, 0x06, 0x89, 0x18, 0x84,
0xd0, 0x3e, 0x80, 0x33, 0x90, 0x86, 0xc4, 0x1d,
0x4c, 0x0b, 0xb8, 0x3d, 0x13, 0x40, 0x42, 0x00,
0x98, 0x96, 0x80, 0x00, 0x00, 0x03, 0x00, 0x01,
0x80
};
/* combines to this codec-data */
h264parse: Add support for stream-format=avc3 When outputting in AVC3 stream format, the codec_data should not contain any SPS or PPS, because they are embedded inside the stream. In case of avc->bytestream h264parse will push the SPS and PPS from codec_data downstream at the start of the stream, at intervals controlled by "config-interval" and when there is a codec_data change. In the case of avc3->bytstream h264parse detects that there is already SPS/PPS in the stream and sets h264parse->push_codec to FALSE. Therefore avc3->bytstream was already supported, except for the stream type. In the case of bystream->avc h264parse will generate codec_data caps from the parsed SPS/PPS in the stream. However it does not remove these SPS/PPS from the stream. bytestream->avc3 is the same as bytestream->avc except that the codec_data must not have any SPS/PPS in it. |--------------+-------------+-------------------| |stream-format | SPS in-band | SPS in codec_data | |--------------+-------------+-------------------| | avc | maybe | always | |--------------+-------------+-------------------| | avc3 | always | never | |--------------+-------------+-------------------| Amendment 2 of ISO/IEC 14496-15 (AVC file format) is defining a new structure for fragmented MP4 called "avc3". The principal difference between AVC1 and AVC3 is the location of the codec initialisation data (e.g. SPS, PPS). In AVC1 this data is placed in the initial MOOV box (moov.trak.mdia.minf.stbl.stsd.avc1) but in AVC3 this data goes in the first sample of every fragment. https://bugzilla.gnome.org/show_bug.cgi?id=702004
2013-08-30 12:54:40 +00:00
static guint8 h264_avc_codec_data[] = {
0x01, 0x4d, 0x40, 0x15, 0xff, 0xe1, 0x00, 0x17,
0x67, 0x4d, 0x40, 0x15, 0xec, 0xa4, 0xbf, 0x2e,
0x02, 0x20, 0x00, 0x00, 0x03, 0x00, 0x2e, 0xe6,
0xb2, 0x80, 0x01, 0xe2, 0xc5, 0xb2, 0xc0, 0x01,
0x00, 0x04, 0x68, 0xeb, 0xec, 0xb2
};
h264parse: Add support for stream-format=avc3 When outputting in AVC3 stream format, the codec_data should not contain any SPS or PPS, because they are embedded inside the stream. In case of avc->bytestream h264parse will push the SPS and PPS from codec_data downstream at the start of the stream, at intervals controlled by "config-interval" and when there is a codec_data change. In the case of avc3->bytstream h264parse detects that there is already SPS/PPS in the stream and sets h264parse->push_codec to FALSE. Therefore avc3->bytstream was already supported, except for the stream type. In the case of bystream->avc h264parse will generate codec_data caps from the parsed SPS/PPS in the stream. However it does not remove these SPS/PPS from the stream. bytestream->avc3 is the same as bytestream->avc except that the codec_data must not have any SPS/PPS in it. |--------------+-------------+-------------------| |stream-format | SPS in-band | SPS in codec_data | |--------------+-------------+-------------------| | avc | maybe | always | |--------------+-------------+-------------------| | avc3 | always | never | |--------------+-------------+-------------------| Amendment 2 of ISO/IEC 14496-15 (AVC file format) is defining a new structure for fragmented MP4 called "avc3". The principal difference between AVC1 and AVC3 is the location of the codec initialisation data (e.g. SPS, PPS). In AVC1 this data is placed in the initial MOOV box (moov.trak.mdia.minf.stbl.stsd.avc1) but in AVC3 this data goes in the first sample of every fragment. https://bugzilla.gnome.org/show_bug.cgi?id=702004
2013-08-30 12:54:40 +00:00
/* codec-data for avc3 where there are no SPS/PPS in the codec_data */
static guint8 h264_avc3_codec_data[] = {
0x01, /* config version, always == 1 */
0x4d, /* profile */
0x40, /* profile compatibility */
0x15, 0xff, /* 6 reserved bits, lengthSizeMinusOne */
0xe0, /* 3 reserved bits, numSPS */
0x00 /* numPPS */
};
static guint8 *h264_codec_data = NULL;
static guint8 h264_codec_data_size = 0;
/* keyframes all around */
static guint8 h264_idrframe[] = {
0x00, 0x00, 0x00, 0x01, 0x65, 0x88, 0x84, 0x00,
0x10, 0xff, 0xfe, 0xf6, 0xf0, 0xfe, 0x05, 0x36,
0x56, 0x04, 0x50, 0x96, 0x7b, 0x3f, 0x53, 0xe1
};
/* truncated nal */
static guint8 garbage_frame[] = {
0x00, 0x00, 0x00, 0x01, 0x05
};
/* context to tweak tests */
static const gchar *ctx_suite;
static gboolean ctx_codec_data;
static gboolean ctx_hdr_sei;
#define SPS_LEN 3
#define SPS_CONSTRAINT_SET_FLAG_0 1 << 7
#define SPS_CONSTRAINT_SET_FLAG_1 (1 << 6)
#define SPS_CONSTRAINT_SET_FLAG_2 (1 << 5)
#define SPS_CONSTRAINT_SET_FLAG_3 (1 << 4)
#define SPS_CONSTRAINT_SET_FLAG_4 (1 << 3)
#define SPS_CONSTRAINT_SET_FLAG_5 (1 << 2)
static void
fill_h264_sps (guint8 * sps, guint8 profile_idc, guint constraint_set_flags,
guint level_idc)
{
memset (sps, 0x0, SPS_LEN);
/*
* * Bit 0:7 - Profile indication
* * Bit 8 - constraint_set0_flag
* * Bit 9 - constraint_set1_flag
* * Bit 10 - constraint_set2_flag
* * Bit 11 - constraint_set3_flag
* * Bit 12 - constraint_set4_flag
* * Bit 13 - constraint_set5_flag
* * Bit 14:15 - Reserved
* * Bit 16:24 - Level indication
* */
sps[0] = profile_idc;
sps[1] |= constraint_set_flags;
sps[2] = level_idc;
}
static gboolean
verify_buffer (buffer_verify_data_s * vdata, GstBuffer * buffer)
{
if (vdata->discard) {
/* check separate header NALs */
gint i = vdata->buffer_counter;
gboolean aud;
/* SEI with start code prefix with 2 0-bytes */
aud = i == 0;
fail_unless (i <= 3);
if (aud) {
fail_unless (gst_buffer_get_size (buffer) == sizeof (h264_aud));
fail_unless (gst_buffer_memcmp (buffer, 0, h264_aud,
gst_buffer_get_size (buffer)) == 0);
vdata->discard++;
} else {
i -= 1;
fail_unless (gst_buffer_get_size (buffer) == ctx_headers[i].size);
fail_unless (gst_buffer_memcmp (buffer, 0, ctx_headers[i].data,
gst_buffer_get_size (buffer)) == 0);
}
} else {
2012-02-07 16:00:26 +00:00
GstMapInfo map;
gst_buffer_map (buffer, &map, GST_MAP_READ);
fail_unless (map.size > 4);
/* only need to check avc and bs-to-nal output case */
if (GST_READ_UINT24_BE (map.data) == 0x01) {
/* in bs-to-nal, a leading 0x00 is stripped from output */
fail_unless (gst_buffer_get_size (buffer) ==
vdata->data_to_verify_size - 1);
fail_unless (gst_buffer_memcmp (buffer, 0, vdata->data_to_verify + 1,
vdata->data_to_verify_size - 1) == 0);
gst_buffer_unmap (buffer, &map);
return TRUE;
} else if (GST_READ_UINT32_BE (map.data) == 0x01) {
gboolean aud = FALSE;
aud = vdata->buffer_counter % 2;
if (aud) {
fail_unless (gst_buffer_get_size (buffer) == sizeof (h264_aud));
fail_unless (gst_buffer_memcmp (buffer, 0, h264_aud,
gst_buffer_get_size (buffer)) == 0);
gst_buffer_unmap (buffer, &map);
return TRUE;
}
/* this is not avc, use default tests from parser.c */
gst_buffer_unmap (buffer, &map);
return FALSE;
}
/* header is merged in initial frame */
if (vdata->buffer_counter == 0) {
2012-02-07 16:00:26 +00:00
guint8 *data = map.data;
2012-02-07 16:00:26 +00:00
fail_unless (map.size == vdata->data_to_verify_size +
ctx_headers[0].size + ctx_headers[1].size + ctx_headers[2].size);
fail_unless (GST_READ_UINT32_BE (data) == ctx_headers[0].size - 4);
fail_unless (memcmp (data + 4, ctx_headers[0].data + 4,
ctx_headers[0].size - 4) == 0);
data += ctx_headers[0].size;
fail_unless (GST_READ_UINT32_BE (data) == ctx_headers[1].size - 4);
fail_unless (memcmp (data + 4, ctx_headers[1].data + 4,
ctx_headers[1].size - 4) == 0);
data += ctx_headers[1].size;
fail_unless (GST_READ_UINT32_BE (data) == ctx_headers[2].size - 4);
fail_unless (memcmp (data + 4, ctx_headers[2].data + 4,
ctx_headers[2].size - 4) == 0);
data += ctx_headers[2].size;
fail_unless (GST_READ_UINT32_BE (data) == vdata->data_to_verify_size - 4);
fail_unless (memcmp (data + 4, vdata->data_to_verify + 4,
vdata->data_to_verify_size - 4) == 0);
} else {
2012-02-07 16:00:26 +00:00
fail_unless (GST_READ_UINT32_BE (map.data) == map.size - 4);
fail_unless (map.size == vdata->data_to_verify_size);
fail_unless (memcmp (map.data + 4, vdata->data_to_verify + 4,
map.size - 4) == 0);
}
2012-02-07 16:00:26 +00:00
gst_buffer_unmap (buffer, &map);
return TRUE;
}
return FALSE;
}
/* A single access unit comprising of SPS, SEI, PPS and IDR frame */
static gboolean
verify_buffer_bs_au (buffer_verify_data_s * vdata, GstBuffer * buffer)
{
GstMapInfo map;
fail_unless (ctx_sink_template == &sinktemplate_bs_au);
/* Currently the parser can only predict DTS when dealing with raw data.
* Ensure that this behavior is being checked here. */
GST_DEBUG ("PTS: %" GST_TIME_FORMAT " DTS: %" GST_TIME_FORMAT,
GST_TIME_ARGS (GST_BUFFER_PTS (buffer)),
GST_TIME_ARGS (GST_BUFFER_DTS (buffer)));
fail_if (GST_BUFFER_PTS_IS_VALID (buffer));
fail_unless (GST_BUFFER_DTS_IS_VALID (buffer));
gst_buffer_map (buffer, &map, GST_MAP_READ);
fail_unless (map.size > 4);
if (vdata->buffer_counter == 0) {
guint8 *data = map.data;
/* AUD, SPS, SEI, PPS */
fail_unless (map.size == vdata->data_to_verify_size +
sizeof (h264_aud) + ctx_headers[0].size +
ctx_headers[1].size + ctx_headers[2].size);
fail_unless (memcmp (data, h264_aud, sizeof (h264_aud)) == 0);
data += sizeof (h264_aud);
fail_unless (memcmp (data, ctx_headers[0].data, ctx_headers[0].size) == 0);
data += ctx_headers[0].size;
fail_unless (memcmp (data, ctx_headers[1].data, ctx_headers[1].size) == 0);
data += ctx_headers[1].size;
fail_unless (memcmp (data, ctx_headers[2].data, ctx_headers[2].size) == 0);
data += ctx_headers[2].size;
/* IDR frame */
fail_unless (memcmp (data, vdata->data_to_verify,
vdata->data_to_verify_size) == 0);
} else {
/* IDR frame */
guint aud_size = sizeof (h264_aud);
fail_unless (map.size == vdata->data_to_verify_size + aud_size);
fail_unless (memcmp (map.data, h264_aud, aud_size) == 0);
fail_unless (memcmp (map.data + aud_size, vdata->data_to_verify,
map.size - aud_size) == 0);
}
gst_buffer_unmap (buffer, &map);
return TRUE;
}
static void
verify_h264parse_compatible_caps (guint profile_idc, guint constraint_set_flags,
const char *profile)
{
GstHarness *h;
GstBuffer *buf;
gchar *sink_caps_str;
guint8 *frame_sps;
guint frame_sps_len;
GstCaps *caps;
h = gst_harness_new ("h264parse");
sink_caps_str = g_strdup_printf ("video/x-h264"
", parsed=(boolean)true"
", stream-format=(string){ avc, avc3, byte-stream }"
", alignment=(string){ au, nal }" ", profile=(string)%s", profile);
/* create and modify sps to the given profile */
frame_sps_len = sizeof (h264_sps);
frame_sps = g_malloc (frame_sps_len);
memcpy (frame_sps, h264_sps, frame_sps_len);
fill_h264_sps (&frame_sps[5], profile_idc, constraint_set_flags, 0);
/* set the peer pad (ie decoder) to the given profile to check the compatibility with the sps */
gst_harness_set_caps_str (h, "video/x-h264", sink_caps_str);
g_free (sink_caps_str);
/* push sps buffer */
buf = gst_buffer_new_and_alloc (frame_sps_len);
gst_buffer_fill (buf, 0, frame_sps, frame_sps_len);
g_free (frame_sps);
fail_unless_equals_int (gst_harness_push (h, buf), GST_FLOW_OK);
fail_unless (gst_harness_push_event (h, gst_event_new_eos ()));
/* check that the caps have been negociated correctly */
fail_unless (caps = gst_pad_get_current_caps (h->sinkpad));
gst_caps_unref (caps);
gst_harness_teardown (h);
}
GST_START_TEST (test_parse_normal)
{
gst_parser_test_normal (h264_idrframe, sizeof (h264_idrframe));
}
GST_END_TEST;
GST_START_TEST (test_parse_drain_single)
{
gst_parser_test_drain_single (h264_idrframe, sizeof (h264_idrframe));
}
GST_END_TEST;
GST_START_TEST (test_parse_drain_garbage)
{
gst_parser_test_drain_garbage (h264_idrframe, sizeof (h264_idrframe),
garbage_frame, sizeof (garbage_frame));
}
GST_END_TEST;
GST_START_TEST (test_parse_split)
{
gst_parser_test_split (h264_idrframe, sizeof (h264_idrframe));
}
GST_END_TEST;
GST_START_TEST (test_parse_skip_garbage)
{
gst_parser_test_skip_garbage (h264_idrframe, sizeof (h264_idrframe),
garbage_frame, sizeof (garbage_frame));
}
GST_END_TEST;
#define structure_get_int(s,f) \
(g_value_get_int(gst_structure_get_value(s,f)))
#define fail_unless_structure_field_int_equals(s,field,num) \
fail_unless_equals_int (structure_get_int(s,field), num)
#define structure_get_string(s,f) \
(g_value_get_string(gst_structure_get_value(s,f)))
#define fail_unless_structure_field_string_equals(s,field,name) \
fail_unless_equals_string (structure_get_string(s,field), name)
GST_START_TEST (test_parse_detect_stream)
{
GstCaps *caps;
GstStructure *s;
GstBuffer *buf;
const GValue *val;
/* parser does not really care that mpeg1 and mpeg2 frame data
* should be a bit different */
caps = gst_parser_test_get_output_caps (h264_idrframe, sizeof (h264_idrframe),
NULL);
fail_unless (caps != NULL);
/* Check that the negotiated caps are as expected */
/* When codec_data is present, parser assumes that data is version 4 */
GST_LOG ("h264 output caps: %" GST_PTR_FORMAT, caps);
s = gst_caps_get_structure (caps, 0);
fail_unless (gst_structure_has_name (s, "video/x-h264"));
fail_unless_structure_field_int_equals (s, "width", 32);
fail_unless_structure_field_int_equals (s, "height", 24);
fail_unless_structure_field_string_equals (s, "profile", "main");
fail_unless_structure_field_string_equals (s, "level", "2.1");
if (ctx_codec_data) {
fail_unless (gst_structure_has_field (s, "codec_data"));
/* check codec-data in more detail */
val = gst_structure_get_value (s, "codec_data");
fail_unless (val != NULL);
buf = gst_value_get_buffer (val);
fail_unless (buf != NULL);
h264parse: Add support for stream-format=avc3 When outputting in AVC3 stream format, the codec_data should not contain any SPS or PPS, because they are embedded inside the stream. In case of avc->bytestream h264parse will push the SPS and PPS from codec_data downstream at the start of the stream, at intervals controlled by "config-interval" and when there is a codec_data change. In the case of avc3->bytstream h264parse detects that there is already SPS/PPS in the stream and sets h264parse->push_codec to FALSE. Therefore avc3->bytstream was already supported, except for the stream type. In the case of bystream->avc h264parse will generate codec_data caps from the parsed SPS/PPS in the stream. However it does not remove these SPS/PPS from the stream. bytestream->avc3 is the same as bytestream->avc except that the codec_data must not have any SPS/PPS in it. |--------------+-------------+-------------------| |stream-format | SPS in-band | SPS in codec_data | |--------------+-------------+-------------------| | avc | maybe | always | |--------------+-------------+-------------------| | avc3 | always | never | |--------------+-------------+-------------------| Amendment 2 of ISO/IEC 14496-15 (AVC file format) is defining a new structure for fragmented MP4 called "avc3". The principal difference between AVC1 and AVC3 is the location of the codec initialisation data (e.g. SPS, PPS). In AVC1 this data is placed in the initial MOOV box (moov.trak.mdia.minf.stbl.stsd.avc1) but in AVC3 this data goes in the first sample of every fragment. https://bugzilla.gnome.org/show_bug.cgi?id=702004
2013-08-30 12:54:40 +00:00
fail_unless (gst_buffer_get_size (buf) == h264_codec_data_size);
2012-02-07 16:00:26 +00:00
fail_unless (gst_buffer_memcmp (buf, 0, h264_codec_data,
gst_buffer_get_size (buf)) == 0);
}
gst_caps_unref (caps);
}
GST_END_TEST;
GST_START_TEST (test_parse_detect_stream_with_hdr_sei)
{
GstCaps *caps;
GstStructure *s;
GstBuffer *buf;
const GValue *val;
guint8 *h264_idr_plus_sei;
gsize h264_idr_plus_sei_size;
h264_idr_plus_sei_size =
sizeof (h264_sei_clli) + sizeof (h264_sei_mdcv) + sizeof (h264_idrframe);
h264_idr_plus_sei = malloc (h264_idr_plus_sei_size);
memcpy (h264_idr_plus_sei, h264_sei_clli, sizeof (h264_sei_clli));
memcpy (h264_idr_plus_sei + sizeof (h264_sei_clli), h264_sei_mdcv,
sizeof (h264_sei_mdcv));
memcpy (h264_idr_plus_sei + sizeof (h264_sei_clli) + sizeof (h264_sei_mdcv),
h264_idrframe, sizeof (h264_idrframe));
/* parser does not really care that mpeg1 and mpeg2 frame data
* should be a bit different */
caps =
gst_parser_test_get_output_caps (h264_idr_plus_sei,
h264_idr_plus_sei_size, NULL);
fail_unless (caps != NULL);
/* Check that the negotiated caps are as expected */
/* When codec_data is present, parser assumes that data is version 4 */
GST_LOG ("h264 output caps: %" GST_PTR_FORMAT, caps);
s = gst_caps_get_structure (caps, 0);
fail_unless (gst_structure_has_name (s, "video/x-h264"));
fail_unless_structure_field_int_equals (s, "width", 32);
fail_unless_structure_field_int_equals (s, "height", 24);
fail_unless_structure_field_string_equals (s, "profile", "main");
fail_unless_structure_field_string_equals (s, "level", "2.1");
fail_unless_structure_field_string_equals (s, "mastering-display-info",
"7500:3000:34000:16000:13200:34500:15635:16450:10000000:1");
fail_unless_structure_field_string_equals (s, "content-light-level",
"1000:400");
if (ctx_codec_data) {
fail_unless (gst_structure_has_field (s, "codec_data"));
/* check codec-data in more detail */
val = gst_structure_get_value (s, "codec_data");
fail_unless (val != NULL);
buf = gst_value_get_buffer (val);
fail_unless (buf != NULL);
fail_unless (gst_buffer_get_size (buf) == h264_codec_data_size);
fail_unless (gst_buffer_memcmp (buf, 0, h264_codec_data,
gst_buffer_get_size (buf)) == 0);
}
g_free (h264_idr_plus_sei);
gst_caps_unref (caps);
}
GST_END_TEST;
static GstStaticPadTemplate srctemplate_avc_au_and_bs_au =
GST_STATIC_PAD_TEMPLATE ("src",
GST_PAD_SRC,
GST_PAD_ALWAYS,
GST_STATIC_CAPS (SRC_CAPS_TMPL
", stream-format = (string) avc, alignment = (string) au; "
SRC_CAPS_TMPL
", stream-format = (string) byte-stream, alignment = (string) au")
);
GST_START_TEST (test_sink_caps_reordering)
{
/* Upstream can handle avc and byte-stream format (in that preference order)
* and downstream requires byte-stream.
* Parser reorder upstream's caps to prefer the format requested downstream
* and so avoid doing useless conversions. */
GstElement *parser;
GstPad *sink, *src;
GstCaps *src_caps, *sink_caps;
GstStructure *s;
parser = gst_check_setup_element ("h264parse");
fail_unless (parser);
src = gst_check_setup_src_pad (parser, &srctemplate_avc_au_and_bs_au);
sink = gst_check_setup_sink_pad (parser, &sinktemplate_bs_au);
src_caps = gst_pad_get_pad_template_caps (src);
sink_caps = gst_pad_peer_query_caps (src, src_caps);
/* Sink pad has both format on its sink caps but prefer to use byte-stream */
g_assert_cmpuint (gst_caps_get_size (sink_caps), ==, 2);
s = gst_caps_get_structure (sink_caps, 0);
g_assert_cmpstr (gst_structure_get_name (s), ==, "video/x-h264");
g_assert_cmpstr (gst_structure_get_string (s, "alignment"), ==, "au");
g_assert_cmpstr (gst_structure_get_string (s, "stream-format"), ==,
"byte-stream");
s = gst_caps_get_structure (sink_caps, 1);
g_assert_cmpstr (gst_structure_get_name (s), ==, "video/x-h264");
g_assert_cmpstr (gst_structure_get_string (s, "alignment"), ==, "au");
g_assert_cmpstr (gst_structure_get_string (s, "stream-format"), ==, "avc");
gst_caps_unref (src_caps);
gst_caps_unref (sink_caps);
gst_object_unref (src);
gst_object_unref (sink);
gst_object_unref (parser);
}
GST_END_TEST;
GST_START_TEST (test_parse_compatible_caps)
{
verify_h264parse_compatible_caps (GST_H264_PROFILE_BASELINE, 0, "extended");
verify_h264parse_compatible_caps (GST_H264_PROFILE_BASELINE,
SPS_CONSTRAINT_SET_FLAG_1, "baseline");
verify_h264parse_compatible_caps (GST_H264_PROFILE_BASELINE,
SPS_CONSTRAINT_SET_FLAG_1, "main");
verify_h264parse_compatible_caps (GST_H264_PROFILE_BASELINE,
SPS_CONSTRAINT_SET_FLAG_1, "high");
verify_h264parse_compatible_caps (GST_H264_PROFILE_BASELINE,
SPS_CONSTRAINT_SET_FLAG_1, "high-10");
verify_h264parse_compatible_caps (GST_H264_PROFILE_BASELINE,
SPS_CONSTRAINT_SET_FLAG_1, "high-4:2:2");
verify_h264parse_compatible_caps (GST_H264_PROFILE_BASELINE,
SPS_CONSTRAINT_SET_FLAG_1, "high-4:4:4");
verify_h264parse_compatible_caps (GST_H264_PROFILE_MAIN, 0, "high");
verify_h264parse_compatible_caps (GST_H264_PROFILE_MAIN, 0, "high-10");
verify_h264parse_compatible_caps (GST_H264_PROFILE_MAIN, 0, "high-4:2:2");
verify_h264parse_compatible_caps (GST_H264_PROFILE_MAIN, 0, "high-4:4:4");
verify_h264parse_compatible_caps (GST_H264_PROFILE_EXTENDED,
SPS_CONSTRAINT_SET_FLAG_0, "baseline");
verify_h264parse_compatible_caps (GST_H264_PROFILE_EXTENDED,
SPS_CONSTRAINT_SET_FLAG_0 | SPS_CONSTRAINT_SET_FLAG_1,
"constrained-baseline");
verify_h264parse_compatible_caps (GST_H264_PROFILE_EXTENDED,
SPS_CONSTRAINT_SET_FLAG_0 | SPS_CONSTRAINT_SET_FLAG_1, "baseline");
verify_h264parse_compatible_caps (GST_H264_PROFILE_EXTENDED,
SPS_CONSTRAINT_SET_FLAG_0 | SPS_CONSTRAINT_SET_FLAG_1, "main");
verify_h264parse_compatible_caps (GST_H264_PROFILE_EXTENDED,
SPS_CONSTRAINT_SET_FLAG_0 | SPS_CONSTRAINT_SET_FLAG_1, "high");
verify_h264parse_compatible_caps (GST_H264_PROFILE_EXTENDED,
SPS_CONSTRAINT_SET_FLAG_0 | SPS_CONSTRAINT_SET_FLAG_1, "high-10");
verify_h264parse_compatible_caps (GST_H264_PROFILE_EXTENDED,
SPS_CONSTRAINT_SET_FLAG_0 | SPS_CONSTRAINT_SET_FLAG_1, "high-4:2:2");
verify_h264parse_compatible_caps (GST_H264_PROFILE_EXTENDED,
SPS_CONSTRAINT_SET_FLAG_0 | SPS_CONSTRAINT_SET_FLAG_1, "high-4:4:4");
verify_h264parse_compatible_caps (GST_H264_PROFILE_EXTENDED,
SPS_CONSTRAINT_SET_FLAG_1, "main");
verify_h264parse_compatible_caps (GST_H264_PROFILE_EXTENDED,
SPS_CONSTRAINT_SET_FLAG_1, "high");
verify_h264parse_compatible_caps (GST_H264_PROFILE_EXTENDED,
SPS_CONSTRAINT_SET_FLAG_1, "high-10");
verify_h264parse_compatible_caps (GST_H264_PROFILE_EXTENDED,
SPS_CONSTRAINT_SET_FLAG_1, "high-4:2:2");
verify_h264parse_compatible_caps (GST_H264_PROFILE_EXTENDED,
SPS_CONSTRAINT_SET_FLAG_1, "high-4:4:4");
verify_h264parse_compatible_caps (GST_H264_PROFILE_HIGH, 0, "high-10");
verify_h264parse_compatible_caps (GST_H264_PROFILE_HIGH, 0, "high-4:2:2");
verify_h264parse_compatible_caps (GST_H264_PROFILE_HIGH, 0, "high-4:4:4");
verify_h264parse_compatible_caps (GST_H264_PROFILE_HIGH,
SPS_CONSTRAINT_SET_FLAG_1, "main");
verify_h264parse_compatible_caps (GST_H264_PROFILE_HIGH,
SPS_CONSTRAINT_SET_FLAG_1, "high-10");
verify_h264parse_compatible_caps (GST_H264_PROFILE_HIGH,
SPS_CONSTRAINT_SET_FLAG_1, "high-4:2:2");
verify_h264parse_compatible_caps (GST_H264_PROFILE_HIGH,
SPS_CONSTRAINT_SET_FLAG_1, "high-4:4:4");
verify_h264parse_compatible_caps (GST_H264_PROFILE_HIGH10, 0, "high-4:2:2");
verify_h264parse_compatible_caps (GST_H264_PROFILE_HIGH10, 0, "high-4:4:4");
verify_h264parse_compatible_caps (GST_H264_PROFILE_HIGH10,
SPS_CONSTRAINT_SET_FLAG_1, "main");
verify_h264parse_compatible_caps (GST_H264_PROFILE_HIGH10,
SPS_CONSTRAINT_SET_FLAG_1, "high");
verify_h264parse_compatible_caps (GST_H264_PROFILE_HIGH10,
SPS_CONSTRAINT_SET_FLAG_1, "high-4:2:2");
verify_h264parse_compatible_caps (GST_H264_PROFILE_HIGH10,
SPS_CONSTRAINT_SET_FLAG_1, "high-4:4:4");
verify_h264parse_compatible_caps (GST_H264_PROFILE_HIGH10,
SPS_CONSTRAINT_SET_FLAG_3, "high-10");
verify_h264parse_compatible_caps (GST_H264_PROFILE_HIGH10,
SPS_CONSTRAINT_SET_FLAG_3, "high-4:2:2");
verify_h264parse_compatible_caps (GST_H264_PROFILE_HIGH10,
SPS_CONSTRAINT_SET_FLAG_3, "high-4:4:4");
verify_h264parse_compatible_caps (GST_H264_PROFILE_HIGH10,
SPS_CONSTRAINT_SET_FLAG_3, "high-4:2:2-intra");
verify_h264parse_compatible_caps (GST_H264_PROFILE_HIGH10,
SPS_CONSTRAINT_SET_FLAG_3, "high-4:4:4-intra");
verify_h264parse_compatible_caps (GST_H264_PROFILE_HIGH_422, 0, "high-4:2:2");
verify_h264parse_compatible_caps (GST_H264_PROFILE_HIGH_422, 0, "high-4:4:4");
verify_h264parse_compatible_caps (GST_H264_PROFILE_HIGH_422,
SPS_CONSTRAINT_SET_FLAG_1, "main");
verify_h264parse_compatible_caps (GST_H264_PROFILE_HIGH_422,
SPS_CONSTRAINT_SET_FLAG_1, "high");
verify_h264parse_compatible_caps (GST_H264_PROFILE_HIGH_422,
SPS_CONSTRAINT_SET_FLAG_1, "high-10");
verify_h264parse_compatible_caps (GST_H264_PROFILE_HIGH_422,
SPS_CONSTRAINT_SET_FLAG_1, "high-4:4:4");
verify_h264parse_compatible_caps (GST_H264_PROFILE_HIGH_422,
SPS_CONSTRAINT_SET_FLAG_3, "high-4:2:2");
verify_h264parse_compatible_caps (GST_H264_PROFILE_HIGH_422,
SPS_CONSTRAINT_SET_FLAG_3, "high-4:4:4");
verify_h264parse_compatible_caps (GST_H264_PROFILE_HIGH_422,
SPS_CONSTRAINT_SET_FLAG_3, "high-4:2:2-intra");
verify_h264parse_compatible_caps (GST_H264_PROFILE_HIGH_422,
SPS_CONSTRAINT_SET_FLAG_3, "high-4:4:4-intra");
verify_h264parse_compatible_caps (GST_H264_PROFILE_HIGH_444,
SPS_CONSTRAINT_SET_FLAG_1, "main");
verify_h264parse_compatible_caps (GST_H264_PROFILE_HIGH_444,
SPS_CONSTRAINT_SET_FLAG_1, "high");
verify_h264parse_compatible_caps (GST_H264_PROFILE_HIGH_444,
SPS_CONSTRAINT_SET_FLAG_1, "high-10");
verify_h264parse_compatible_caps (GST_H264_PROFILE_HIGH_444,
SPS_CONSTRAINT_SET_FLAG_1, "high-4:2:2");
verify_h264parse_compatible_caps (GST_H264_PROFILE_HIGH_444,
SPS_CONSTRAINT_SET_FLAG_3, "high-4:4:4");
}
GST_END_TEST;
static Suite *
h264parse_suite (void)
{
Suite *s = suite_create (ctx_suite);
TCase *tc_chain = tcase_create ("general");
suite_add_tcase (s, tc_chain);
tcase_add_test (tc_chain, test_parse_normal);
tcase_add_test (tc_chain, test_parse_drain_single);
tcase_add_test (tc_chain, test_parse_drain_garbage);
tcase_add_test (tc_chain, test_parse_split);
tcase_add_test (tc_chain, test_parse_skip_garbage);
tcase_add_test (tc_chain, test_parse_detect_stream);
if (ctx_hdr_sei)
tcase_add_test (tc_chain, test_parse_detect_stream_with_hdr_sei);
tcase_add_test (tc_chain, test_sink_caps_reordering);
return s;
}
static gboolean
verify_buffer_packetized (buffer_verify_data_s * vdata, GstBuffer * buffer)
{
2012-02-07 16:00:26 +00:00
GstMapInfo map;
gst_buffer_map (buffer, &map, GST_MAP_READ);
fail_unless (map.size > 4);
fail_unless (GST_READ_UINT32_BE (map.data) == 0x01);
if (vdata->discard) {
/* check separate header NALs */
guint8 *data;
gint size;
if (vdata->buffer_counter == 0) {
data = h264_aud;
size = sizeof (h264_aud);
vdata->discard++;
} else if (vdata->buffer_counter == 1) {
data = h264_sps;
size = sizeof (h264_sps);
} else {
data = h264_pps;
size = sizeof (h264_pps);
}
2012-02-07 16:00:26 +00:00
fail_unless (map.size == size);
fail_unless (memcmp (map.data + 4, data + 4, size - 4) == 0);
} else {
guint8 *data;
gint size;
gboolean aud = vdata->buffer_counter % 2;
if (aud) {
data = h264_aud;
size = sizeof (h264_aud);
} else {
data = (gpointer) vdata->data_to_verify;
size = map.size;
}
fail_unless (map.size == size);
fail_unless (memcmp (map.data + 4, data + 4, size - 4) == 0);
}
2012-02-07 16:00:26 +00:00
gst_buffer_unmap (buffer, &map);
return TRUE;
}
GST_START_TEST (test_parse_packetized)
{
guint8 *frame;
GstCaps *caps;
GstBuffer *cdata;
GstStructure *s;
gchar *desc;
/* make AVC frame */
frame = g_malloc (sizeof (h264_idrframe));
GST_WRITE_UINT32_BE (frame, sizeof (h264_idrframe) - 4);
memcpy (frame + 4, h264_idrframe + 4, sizeof (h264_idrframe) - 4);
/* some caps messing */
caps = gst_caps_from_string (SRC_CAPS_TMPL);
2012-02-07 16:00:26 +00:00
cdata =
2012-03-21 12:23:42 +00:00
gst_buffer_new_wrapped_full (GST_MEMORY_FLAG_READONLY, h264_codec_data,
h264parse: Add support for stream-format=avc3 When outputting in AVC3 stream format, the codec_data should not contain any SPS or PPS, because they are embedded inside the stream. In case of avc->bytestream h264parse will push the SPS and PPS from codec_data downstream at the start of the stream, at intervals controlled by "config-interval" and when there is a codec_data change. In the case of avc3->bytstream h264parse detects that there is already SPS/PPS in the stream and sets h264parse->push_codec to FALSE. Therefore avc3->bytstream was already supported, except for the stream type. In the case of bystream->avc h264parse will generate codec_data caps from the parsed SPS/PPS in the stream. However it does not remove these SPS/PPS from the stream. bytestream->avc3 is the same as bytestream->avc except that the codec_data must not have any SPS/PPS in it. |--------------+-------------+-------------------| |stream-format | SPS in-band | SPS in codec_data | |--------------+-------------+-------------------| | avc | maybe | always | |--------------+-------------+-------------------| | avc3 | always | never | |--------------+-------------+-------------------| Amendment 2 of ISO/IEC 14496-15 (AVC file format) is defining a new structure for fragmented MP4 called "avc3". The principal difference between AVC1 and AVC3 is the location of the codec initialisation data (e.g. SPS, PPS). In AVC1 this data is placed in the initial MOOV box (moov.trak.mdia.minf.stbl.stsd.avc1) but in AVC3 this data goes in the first sample of every fragment. https://bugzilla.gnome.org/show_bug.cgi?id=702004
2013-08-30 12:54:40 +00:00
h264_codec_data_size, 0, h264_codec_data_size, NULL, NULL);
gst_caps_set_simple (caps, "codec_data", GST_TYPE_BUFFER, cdata,
"stream-format", G_TYPE_STRING, "avc", NULL);
gst_buffer_unref (cdata);
desc = gst_caps_to_string (caps);
gst_caps_unref (caps);
caps = gst_parser_test_get_output_caps (frame, sizeof (h264_idrframe), desc);
g_free (desc);
g_free (frame);
/* minor caps checks */
GST_LOG ("h264 output caps: %" GST_PTR_FORMAT, caps);
s = gst_caps_get_structure (caps, 0);
fail_unless (gst_structure_has_name (s, "video/x-h264"));
fail_unless_structure_field_int_equals (s, "width", 32);
fail_unless_structure_field_int_equals (s, "height", 24);
gst_caps_unref (caps);
}
GST_END_TEST;
static Suite *
h264parse_packetized_suite (void)
{
Suite *s = suite_create (ctx_suite);
TCase *tc_chain = tcase_create ("general");
suite_add_tcase (s, tc_chain);
tcase_add_test (tc_chain, test_parse_packetized);
return s;
}
/* These were generated using pipeline:
* gst-launch-1.0 videotestsrc num-buffers=1 pattern=green \
* ! video/x-raw,width=128,height=128 \
* ! openh264enc num-slices=2 \
* ! fakesink dump=1
*/
/* SPS */
static guint8 h264_slicing_sps[] = {
0x00, 0x00, 0x00, 0x01, 0x67, 0x42, 0xc0, 0x0b,
0x8c, 0x8d, 0x41, 0x02, 0x24, 0x03, 0xc2, 0x21,
0x1a, 0x80
};
/* PPS */
static guint8 h264_slicing_pps[] = {
0x00, 0x00, 0x00, 0x01, 0x68, 0xce, 0x3c, 0x80
};
/* IDR Slice 1 */
static guint8 h264_idr_slice_1[] = {
0x00, 0x00, 0x00, 0x01, 0x65, 0xb8, 0x00, 0x04,
0x00, 0x00, 0x11, 0xff, 0xff, 0xf8, 0x22, 0x8a,
0x1f, 0x1c, 0x00, 0x04, 0x0a, 0x63, 0x80, 0x00,
0x81, 0xec, 0x9a, 0x93, 0x93, 0x93, 0x93, 0x93,
0x93, 0xad, 0x57, 0x5d, 0x75, 0xd7, 0x5d, 0x75,
0xd7, 0x5d, 0x75, 0xd7, 0x5d, 0x75, 0xd7, 0x5d,
0x75, 0xd7, 0x5d, 0x78
};
/* IDR Slice 2 */
static guint8 h264_idr_slice_2[] = {
0x00, 0x00, 0x00, 0x01, 0x65, 0x04, 0x2e, 0x00,
0x01, 0x00, 0x00, 0x04, 0x7f, 0xff, 0xfe, 0x08,
0xa2, 0x87, 0xc7, 0x00, 0x01, 0x02, 0x98, 0xe0,
0x00, 0x20, 0x7b, 0x26, 0xa4, 0xe4, 0xe4, 0xe4,
0xe4, 0xe4, 0xeb, 0x55, 0xd7, 0x5d, 0x75, 0xd7,
0x5d, 0x75, 0xd7, 0x5d, 0x75, 0xd7, 0x5d, 0x75,
0xd7, 0x5d, 0x75, 0xd7, 0x5e
};
static inline GstBuffer *
wrap_buffer (const guint8 * buf, gsize size, GstClockTime pts,
GstBufferFlags flags)
{
GstBuffer *buffer;
buffer = gst_buffer_new_wrapped_full (GST_MEMORY_FLAG_READONLY,
(gpointer) buf, size, 0, size, NULL, NULL);
GST_BUFFER_PTS (buffer) = pts;
GST_BUFFER_FLAGS (buffer) |= flags;
return buffer;
}
static inline GstBuffer *
composite_buffer (GstClockTime pts, GstBufferFlags flags, gint count, ...)
{
va_list vl;
gint i;
const guint8 *data;
gsize size;
GstBuffer *buffer;
va_start (vl, count);
buffer = gst_buffer_new ();
for (i = 0; i < count; i++) {
data = va_arg (vl, guint8 *);
size = va_arg (vl, gsize);
buffer = gst_buffer_append (buffer, wrap_buffer (data, size, 0, 0));
}
GST_BUFFER_PTS (buffer) = pts;
GST_BUFFER_FLAGS (buffer) |= flags;
va_end (vl);
return buffer;
}
#define pull_and_check_full(h, data, size, pts, flags) \
{ \
GstBuffer *b = gst_harness_pull (h); \
gst_check_buffer_data (b, data, size); \
fail_unless_equals_clocktime (GST_BUFFER_PTS (b), pts); \
if (flags) \
fail_unless (GST_BUFFER_FLAG_IS_SET (b, flags)); \
gst_buffer_unref (b); \
}
#define pull_and_check(h, data, pts, flags) \
pull_and_check_full (h, data, sizeof (data), pts, flags)
#define pull_and_drop(h) \
G_STMT_START { \
GstBuffer *b = gst_harness_pull (h); \
gst_buffer_unref (b); \
} G_STMT_END;
GST_START_TEST (test_parse_sliced_nal_nal)
{
GstHarness *h = gst_harness_new ("h264parse");
GstBuffer *buf;
gst_harness_set_caps_str (h,
"video/x-h264,stream-format=byte-stream,alignment=nal,parsed=false,framerate=30/1",
"video/x-h264,stream-format=byte-stream,alignment=nal,parsed=true");
buf = wrap_buffer (h264_slicing_sps, sizeof (h264_slicing_sps), 10, 0);
fail_unless_equals_int (gst_harness_push (h, buf), GST_FLOW_OK);
buf = wrap_buffer (h264_slicing_pps, sizeof (h264_slicing_pps), 10, 0);
fail_unless_equals_int (gst_harness_push (h, buf), GST_FLOW_OK);
/* parser must have inserted AUD before the headers, with the same PTS */
pull_and_check (h, h264_aud, 10, 0);
/* drop the header buffers */
while ((buf = gst_harness_try_pull (h)))
gst_buffer_unref (buf);
/* reported latency must be zero */
fail_unless_equals_clocktime (gst_harness_query_latency (h), 0);
/* test some flow with 2 slices.
* 1st slice gets the input PTS, second gets NONE */
buf = wrap_buffer (h264_idr_slice_1, sizeof (h264_idr_slice_1), 100, 0);
fail_unless_equals_int (gst_harness_push (h, buf), GST_FLOW_OK);
fail_unless_equals_int (gst_harness_buffers_in_queue (h), 1);
pull_and_check (h, h264_idr_slice_1, 100, 0);
buf = wrap_buffer (h264_idr_slice_2, sizeof (h264_idr_slice_2), 100, 0);
fail_unless_equals_int (gst_harness_push (h, buf), GST_FLOW_OK);
fail_unless_equals_int (gst_harness_buffers_in_queue (h), 1);
pull_and_check (h, h264_idr_slice_2, -1, 0);
buf = wrap_buffer (h264_idr_slice_1, sizeof (h264_idr_slice_1), 200, 0);
fail_unless_equals_int (gst_harness_push (h, buf), GST_FLOW_OK);
fail_unless_equals_int (gst_harness_buffers_in_queue (h), 2);
pull_and_check (h, h264_aud, 200, 0);
pull_and_check (h, h264_idr_slice_1, 200, 0);
buf = wrap_buffer (h264_idr_slice_2, sizeof (h264_idr_slice_2), 200, 0);
fail_unless_equals_int (gst_harness_push (h, buf), GST_FLOW_OK);
fail_unless_equals_int (gst_harness_buffers_in_queue (h), 1);
pull_and_check (h, h264_idr_slice_2, -1, 0);
buf = wrap_buffer (h264_idr_slice_1, sizeof (h264_idr_slice_1), 250, 0);
fail_unless_equals_int (gst_harness_push (h, buf), GST_FLOW_OK);
fail_unless_equals_int (gst_harness_buffers_in_queue (h), 2);
pull_and_check (h, h264_aud, 250, 0);
pull_and_check (h, h264_idr_slice_1, 250, 0);
/* 1st slice starts a new AU, even though the previous one is incomplete.
* DISCONT must also be propagated */
buf = wrap_buffer (h264_idr_slice_1, sizeof (h264_idr_slice_1), 400,
GST_BUFFER_FLAG_DISCONT);
fail_unless_equals_int (gst_harness_push (h, buf), GST_FLOW_OK);
fail_unless_equals_int (gst_harness_buffers_in_queue (h), 2);
pull_and_check (h, h264_aud, 400, 0);
pull_and_check (h, h264_idr_slice_1, 400, GST_BUFFER_FLAG_DISCONT);
gst_harness_teardown (h);
}
GST_END_TEST;
GST_START_TEST (test_parse_sliced_au_nal)
{
GstHarness *h = gst_harness_new ("h264parse");
GstBuffer *buf;
gst_harness_set_caps_str (h,
"video/x-h264,stream-format=byte-stream,alignment=au,parsed=false,framerate=30/1",
"video/x-h264,stream-format=byte-stream,alignment=nal,parsed=true");
/* push the whole AU in a single buffer */
buf = composite_buffer (100, 0, 4,
h264_slicing_sps, sizeof (h264_slicing_sps),
h264_slicing_pps, sizeof (h264_slicing_pps),
h264_idr_slice_1, sizeof (h264_idr_slice_1),
h264_idr_slice_2, sizeof (h264_idr_slice_2));
fail_unless_equals_int (gst_harness_push (h, buf), GST_FLOW_OK);
/* parser must have inserted AUD before the headers, with the same PTS */
pull_and_check (h, h264_aud, 100, 0);
/* drop the headers */
fail_unless (gst_harness_buffers_in_queue (h) > 2);
while (gst_harness_buffers_in_queue (h) > 2)
pull_and_drop (h);
/* reported latency must be zero */
fail_unless_equals_clocktime (gst_harness_query_latency (h), 0);
/* 1st slice here doens't have a PTS
* because it was present in the first header NAL */
pull_and_check (h, h264_idr_slice_1, -1, 0);
pull_and_check (h, h264_idr_slice_2, -1, 0);
/* new AU. we expect AUD to be inserted and 1st slice to have the same PTS */
buf = composite_buffer (200, 0, 2,
h264_idr_slice_1, sizeof (h264_idr_slice_1),
h264_idr_slice_2, sizeof (h264_idr_slice_2));
fail_unless_equals_int (gst_harness_push (h, buf), GST_FLOW_OK);
fail_unless_equals_int (gst_harness_buffers_in_queue (h), 3);
pull_and_check (h, h264_aud, 200, 0);
pull_and_check (h, h264_idr_slice_1, 200, 0);
pull_and_check (h, h264_idr_slice_2, -1, 0);
/* DISCONT must be propagated */
buf = composite_buffer (400, GST_BUFFER_FLAG_DISCONT, 2,
h264_idr_slice_1, sizeof (h264_idr_slice_1),
h264_idr_slice_2, sizeof (h264_idr_slice_2));
fail_unless_equals_int (gst_harness_push (h, buf), GST_FLOW_OK);
fail_unless_equals_int (gst_harness_buffers_in_queue (h), 3);
pull_and_check (h, h264_aud, 400, 0);
pull_and_check (h, h264_idr_slice_1, 400, GST_BUFFER_FLAG_DISCONT);
pull_and_check (h, h264_idr_slice_2, -1, 0);
gst_harness_teardown (h);
}
GST_END_TEST;
GST_START_TEST (test_parse_sliced_nal_au)
{
GstHarness *h = gst_harness_new ("h264parse");
GstBuffer *buf;
gst_harness_set_caps_str (h,
"video/x-h264,stream-format=byte-stream,alignment=nal,parsed=false,framerate=30/1",
"video/x-h264,stream-format=byte-stream,alignment=au,parsed=true");
buf = wrap_buffer (h264_slicing_sps, sizeof (h264_slicing_sps), 100, 0);
fail_unless_equals_int (gst_harness_push (h, buf), GST_FLOW_OK);
buf = wrap_buffer (h264_slicing_pps, sizeof (h264_slicing_pps), 100, 0);
fail_unless_equals_int (gst_harness_push (h, buf), GST_FLOW_OK);
buf = wrap_buffer (h264_idr_slice_1, sizeof (h264_idr_slice_1), 100, 0);
fail_unless_equals_int (gst_harness_push (h, buf), GST_FLOW_OK);
buf = wrap_buffer (h264_idr_slice_2, sizeof (h264_idr_slice_2), 100, 0);
fail_unless_equals_int (gst_harness_push (h, buf), GST_FLOW_OK);
/* no output yet, it will be pushed as soon as
* the parser recognizes the new AU */
fail_unless_equals_int (gst_harness_buffers_in_queue (h), 0);
buf = wrap_buffer (h264_idr_slice_1, sizeof (h264_idr_slice_1), 200, 0);
fail_unless_equals_int (gst_harness_push (h, buf), GST_FLOW_OK);
fail_unless_equals_int (gst_harness_buffers_in_queue (h), 1);
{
GstMapInfo info;
buf = composite_buffer (100, 0, 5,
h264_aud, sizeof (h264_aud),
h264_slicing_sps, sizeof (h264_slicing_sps),
h264_slicing_pps, sizeof (h264_slicing_pps),
h264_idr_slice_1, sizeof (h264_idr_slice_1),
h264_idr_slice_2, sizeof (h264_idr_slice_2));
gst_buffer_map (buf, &info, GST_MAP_READ);
pull_and_check_full (h, info.data, info.size, 100, 0);
gst_buffer_unmap (buf, &info);
gst_buffer_unref (buf);
}
/* reported latency must be 1 frame (@ 30fps because of sink pad caps) */
fail_unless_equals_clocktime (gst_harness_query_latency (h),
gst_util_uint64_scale (GST_SECOND, 1, 30));
gst_harness_teardown (h);
}
GST_END_TEST;
GST_START_TEST (test_parse_sliced_sps_pps_sps)
{
GstHarness *h = gst_harness_new ("h264parse");
GstBuffer *buf;
gst_harness_set_caps_str (h,
"video/x-h264,stream-format=byte-stream,alignment=nal,parsed=false,framerate=30/1",
"video/x-h264,stream-format=byte-stream,alignment=au,parsed=true");
buf = wrap_buffer (h264_slicing_sps, sizeof (h264_slicing_sps), 100, 0);
fail_unless_equals_int (gst_harness_push (h, buf), GST_FLOW_OK);
buf = wrap_buffer (h264_slicing_pps, sizeof (h264_slicing_pps), 100, 0);
fail_unless_equals_int (gst_harness_push (h, buf), GST_FLOW_OK);
buf = wrap_buffer (h264_idr_slice_1, sizeof (h264_idr_slice_1), 100, 0);
fail_unless_equals_int (gst_harness_push (h, buf), GST_FLOW_OK);
/* no output yet, it will be pushed as soon as
* the parser recognizes the new AU */
fail_unless_equals_int (gst_harness_buffers_in_queue (h), 0);
buf = wrap_buffer (h264_slicing_sps, sizeof (h264_slicing_sps), 200, 0);
fail_unless_equals_int (gst_harness_push (h, buf), GST_FLOW_OK);
/* no PP, just a SPS here is valid */
buf = wrap_buffer (h264_idr_slice_1, sizeof (h264_idr_slice_1), 200, 0);
fail_unless_equals_int (gst_harness_push (h, buf), GST_FLOW_OK);
fail_unless_equals_int (gst_harness_buffers_in_queue (h), 1);
buf = wrap_buffer (h264_idr_slice_1, sizeof (h264_idr_slice_1), 300, 0);
fail_unless_equals_int (gst_harness_push (h, buf), GST_FLOW_OK);
fail_unless_equals_int (gst_harness_buffers_in_queue (h), 2);
{
GstMapInfo info;
buf = composite_buffer (100, 0, 4,
h264_aud, sizeof (h264_aud),
h264_slicing_sps, sizeof (h264_slicing_sps),
h264_slicing_pps, sizeof (h264_slicing_pps),
h264_idr_slice_1, sizeof (h264_idr_slice_1));
gst_buffer_map (buf, &info, GST_MAP_READ);
pull_and_check_full (h, info.data, info.size, 100, 0);
gst_buffer_unmap (buf, &info);
gst_buffer_unref (buf);
buf = composite_buffer (200, 0, 3,
h264_aud, sizeof (h264_aud),
h264_slicing_sps, sizeof (h264_slicing_sps),
h264_idr_slice_1, sizeof (h264_idr_slice_1));
gst_buffer_map (buf, &info, GST_MAP_READ);
pull_and_check_full (h, info.data, info.size, 200, 0);
gst_buffer_unmap (buf, &info);
gst_buffer_unref (buf);
}
gst_harness_teardown (h);
}
GST_END_TEST;
static Suite *
h264parse_sliced_suite (void)
{
Suite *s = suite_create (ctx_suite);
TCase *tc_chain = tcase_create ("general");
suite_add_tcase (s, tc_chain);
tcase_add_test (tc_chain, test_parse_sliced_nal_nal);
tcase_add_test (tc_chain, test_parse_sliced_au_nal);
tcase_add_test (tc_chain, test_parse_sliced_nal_au);
tcase_add_test (tc_chain, test_parse_sliced_sps_pps_sps);
return s;
}
GST_START_TEST (test_parse_sei_closedcaptions)
{
GstVideoCaptionMeta *cc;
GstHarness *h;
GstBuffer *buf;
const guint8 cc_sei_plus_idr[] = {
0x00, 0x00, 0x00, 0x4b, 0x06, 0x04, 0x47, 0xb5, 0x00, 0x31, 0x47, 0x41,
0x39, 0x34, 0x03, 0xd4,
0xff, 0xfc, 0x80, 0x80, 0xfd, 0x80, 0x80, 0xfa, 0x00, 0x00, 0xfa, 0x00,
0x00, 0xfa, 0x00, 0x00,
0xfa, 0x00, 0x00, 0xfa, 0x00, 0x00, 0xfa, 0x00, 0x00, 0xfa, 0x00, 0x00,
0xfa, 0x00, 0x00, 0xfa,
0x00, 0x00, 0xfa, 0x00, 0x00, 0xfa, 0x00, 0x00, 0xfa, 0x00, 0x00, 0xfa,
0x00, 0x00, 0xfa, 0x00,
0x00, 0xfa, 0x00, 0x00, 0xfa, 0x00, 0x00, 0xfa, 0x00, 0x00, 0xfa, 0x00,
0x00, 0xff, 0x80,
/* IDR frame (doesn't necessarily match caps) */
0x00, 0x00, 0x00, 0x14, 0x65, 0x88, 0x84, 0x00,
0x10, 0xff, 0xfe, 0xf6, 0xf0, 0xfe, 0x05, 0x36,
0x56, 0x04, 0x50, 0x96, 0x7b, 0x3f, 0x53, 0xe1
};
const gsize cc_sei_plus_idr_size = sizeof (cc_sei_plus_idr);
h = gst_harness_new ("h264parse");
gst_harness_set_src_caps_str (h,
"video/x-h264, stream-format=(string)avc, alignment=(string)au,"
" codec_data=(buffer)014d4015ffe10017674d4015eca4bf2e0220000003002ee6b28001e2c5b2c001000468ebecb2,"
" width=(int)32, height=(int)24, framerate=(fraction)30/1,"
" pixel-aspect-ratio=(fraction)1/1");
buf = gst_buffer_new_and_alloc (cc_sei_plus_idr_size);
gst_buffer_fill (buf, 0, cc_sei_plus_idr, cc_sei_plus_idr_size);
fail_unless_equals_int (gst_harness_push (h, buf), GST_FLOW_OK);
buf = gst_harness_pull (h);
cc = gst_buffer_get_video_caption_meta (buf);
fail_unless (cc != NULL);
fail_unless_equals_int (cc->caption_type, GST_VIDEO_CAPTION_TYPE_CEA708_RAW);
fail_unless_equals_int (cc->size, 60);
fail_unless_equals_int (cc->data[0], 0xfc);
fail_unless_equals_int (cc->data[3], 0xfd);
gst_buffer_unref (buf);
gst_harness_teardown (h);
}
GST_END_TEST;
GST_START_TEST (test_parse_skip_to_4bytes_sc)
{
GstHarness *h;
GstBuffer *buf1, *buf2;
const guint8 initial_bytes[] = { 0x00, 0x00, 0x00, 0x00, 0x01 };
GstMapInfo map;
h = gst_harness_new ("h264parse");
gst_harness_set_caps_str (h, "video/x-h264, stream-format=byte-stream",
"video/x-h264, stream-format=byte-stream, alignment=nal");
/* padding bytes, four bytes start code. */
buf1 = wrap_buffer (initial_bytes, sizeof (initial_bytes), 100, 0);
/* The second contains the an AUD, starting from NAL identification byte,
* and is followed by SPS, PPS and IDR */
buf2 = composite_buffer (100, 0, 4, h264_aud + 4, sizeof (h264_aud) - 4,
h264_sps, sizeof (h264_sps), h264_pps, sizeof (h264_pps),
h264_idrframe, sizeof (h264_idrframe));
fail_unless_equals_int (gst_harness_push (h, buf1), GST_FLOW_OK);
fail_unless_equals_int (gst_harness_buffers_in_queue (h), 0);
fail_unless_equals_int (gst_harness_push (h, buf2), GST_FLOW_OK);
/* The parser will deliver AUD, SPS, PPS as it now have complete caps */
fail_unless_equals_int (gst_harness_buffers_in_queue (h), 3);
buf1 = gst_harness_pull (h);
gst_buffer_map (buf1, &map, GST_MAP_READ);
fail_unless_equals_int (gst_buffer_get_size (buf1), sizeof (h264_aud));
gst_buffer_unmap (buf1, &map);
gst_buffer_unref (buf1);
gst_harness_teardown (h);
}
GST_END_TEST;
/*
* TODO:
* - Both push- and pull-modes need to be tested
* * Pull-mode & EOS
*/
int
main (int argc, char **argv)
{
2011-11-01 11:12:56 +00:00
int nf = 0;
Suite *s;
SRunner *sr;
gst_check_init (&argc, &argv);
/* globabl init test context */
ctx_factory = "h264parse";
ctx_sink_template = &sinktemplate_bs_nal;
ctx_src_template = &srctemplate;
ctx_headers[0].data = h264_sps;
ctx_headers[0].size = sizeof (h264_sps);
ctx_headers[1].data = h264_sei_buffering_period;
ctx_headers[1].size = sizeof (h264_sei_buffering_period);
ctx_headers[2].data = h264_pps;
ctx_headers[2].size = sizeof (h264_pps);
ctx_verify_buffer = verify_buffer;
ctx_frame_generated = TRUE;
/* discard initial sps/pps buffers */
ctx_discard = 3;
/* no timing info to parse */
ctx_no_metadata = TRUE;
ctx_codec_data = FALSE;
ctx_hdr_sei = FALSE;
h264parse: Add support for stream-format=avc3 When outputting in AVC3 stream format, the codec_data should not contain any SPS or PPS, because they are embedded inside the stream. In case of avc->bytestream h264parse will push the SPS and PPS from codec_data downstream at the start of the stream, at intervals controlled by "config-interval" and when there is a codec_data change. In the case of avc3->bytstream h264parse detects that there is already SPS/PPS in the stream and sets h264parse->push_codec to FALSE. Therefore avc3->bytstream was already supported, except for the stream type. In the case of bystream->avc h264parse will generate codec_data caps from the parsed SPS/PPS in the stream. However it does not remove these SPS/PPS from the stream. bytestream->avc3 is the same as bytestream->avc except that the codec_data must not have any SPS/PPS in it. |--------------+-------------+-------------------| |stream-format | SPS in-band | SPS in codec_data | |--------------+-------------+-------------------| | avc | maybe | always | |--------------+-------------+-------------------| | avc3 | always | never | |--------------+-------------+-------------------| Amendment 2 of ISO/IEC 14496-15 (AVC file format) is defining a new structure for fragmented MP4 called "avc3". The principal difference between AVC1 and AVC3 is the location of the codec initialisation data (e.g. SPS, PPS). In AVC1 this data is placed in the initial MOOV box (moov.trak.mdia.minf.stbl.stsd.avc1) but in AVC3 this data goes in the first sample of every fragment. https://bugzilla.gnome.org/show_bug.cgi?id=702004
2013-08-30 12:54:40 +00:00
h264_codec_data = h264_avc_codec_data;
h264_codec_data_size = sizeof (h264_avc_codec_data);
ctx_suite = "h264parse_to_bs_nal";
s = h264parse_suite ();
nf += gst_check_run_suite (s, ctx_suite, __FILE__ "_to_bs_nal.c");
/* setup and tweak to handle bs au output */
ctx_suite = "h264parse_to_bs_au";
ctx_sink_template = &sinktemplate_bs_au;
ctx_verify_buffer = verify_buffer_bs_au;
ctx_discard = 0;
ctx_frame_generated = FALSE;
ctx_hdr_sei = TRUE;
s = h264parse_suite ();
nf += gst_check_run_suite (s, ctx_suite, __FILE__ "_to_bs_au.c");
/* setup and tweak to handle avc au output */
ctx_suite = "h264parse_to_avc_au";
ctx_sink_template = &sinktemplate_avc_au;
ctx_verify_buffer = verify_buffer;
ctx_discard = 0;
ctx_codec_data = TRUE;
ctx_hdr_sei = FALSE;
s = h264parse_suite ();
sr = srunner_create (s);
srunner_run_all (sr, CK_NORMAL);
2011-11-01 11:12:56 +00:00
nf += srunner_ntests_failed (sr);
srunner_free (sr);
h264parse: Add support for stream-format=avc3 When outputting in AVC3 stream format, the codec_data should not contain any SPS or PPS, because they are embedded inside the stream. In case of avc->bytestream h264parse will push the SPS and PPS from codec_data downstream at the start of the stream, at intervals controlled by "config-interval" and when there is a codec_data change. In the case of avc3->bytstream h264parse detects that there is already SPS/PPS in the stream and sets h264parse->push_codec to FALSE. Therefore avc3->bytstream was already supported, except for the stream type. In the case of bystream->avc h264parse will generate codec_data caps from the parsed SPS/PPS in the stream. However it does not remove these SPS/PPS from the stream. bytestream->avc3 is the same as bytestream->avc except that the codec_data must not have any SPS/PPS in it. |--------------+-------------+-------------------| |stream-format | SPS in-band | SPS in codec_data | |--------------+-------------+-------------------| | avc | maybe | always | |--------------+-------------+-------------------| | avc3 | always | never | |--------------+-------------+-------------------| Amendment 2 of ISO/IEC 14496-15 (AVC file format) is defining a new structure for fragmented MP4 called "avc3". The principal difference between AVC1 and AVC3 is the location of the codec initialisation data (e.g. SPS, PPS). In AVC1 this data is placed in the initial MOOV box (moov.trak.mdia.minf.stbl.stsd.avc1) but in AVC3 this data goes in the first sample of every fragment. https://bugzilla.gnome.org/show_bug.cgi?id=702004
2013-08-30 12:54:40 +00:00
/* setup and tweak to handle avc3 au output */
h264_codec_data = h264_avc3_codec_data;
h264_codec_data_size = sizeof (h264_avc3_codec_data);
ctx_suite = "h264parse_to_avc3_au";
ctx_sink_template = &sinktemplate_avc3_au;
ctx_discard = 0;
ctx_codec_data = TRUE;
s = h264parse_suite ();
nf += gst_check_run_suite (s, ctx_suite, __FILE__ "_to_avc3_au.c");
h264parse: Add support for stream-format=avc3 When outputting in AVC3 stream format, the codec_data should not contain any SPS or PPS, because they are embedded inside the stream. In case of avc->bytestream h264parse will push the SPS and PPS from codec_data downstream at the start of the stream, at intervals controlled by "config-interval" and when there is a codec_data change. In the case of avc3->bytstream h264parse detects that there is already SPS/PPS in the stream and sets h264parse->push_codec to FALSE. Therefore avc3->bytstream was already supported, except for the stream type. In the case of bystream->avc h264parse will generate codec_data caps from the parsed SPS/PPS in the stream. However it does not remove these SPS/PPS from the stream. bytestream->avc3 is the same as bytestream->avc except that the codec_data must not have any SPS/PPS in it. |--------------+-------------+-------------------| |stream-format | SPS in-band | SPS in codec_data | |--------------+-------------+-------------------| | avc | maybe | always | |--------------+-------------+-------------------| | avc3 | always | never | |--------------+-------------+-------------------| Amendment 2 of ISO/IEC 14496-15 (AVC file format) is defining a new structure for fragmented MP4 called "avc3". The principal difference between AVC1 and AVC3 is the location of the codec initialisation data (e.g. SPS, PPS). In AVC1 this data is placed in the initial MOOV box (moov.trak.mdia.minf.stbl.stsd.avc1) but in AVC3 this data goes in the first sample of every fragment. https://bugzilla.gnome.org/show_bug.cgi?id=702004
2013-08-30 12:54:40 +00:00
/* setup and tweak to handle avc packetized input */
h264parse: Add support for stream-format=avc3 When outputting in AVC3 stream format, the codec_data should not contain any SPS or PPS, because they are embedded inside the stream. In case of avc->bytestream h264parse will push the SPS and PPS from codec_data downstream at the start of the stream, at intervals controlled by "config-interval" and when there is a codec_data change. In the case of avc3->bytstream h264parse detects that there is already SPS/PPS in the stream and sets h264parse->push_codec to FALSE. Therefore avc3->bytstream was already supported, except for the stream type. In the case of bystream->avc h264parse will generate codec_data caps from the parsed SPS/PPS in the stream. However it does not remove these SPS/PPS from the stream. bytestream->avc3 is the same as bytestream->avc except that the codec_data must not have any SPS/PPS in it. |--------------+-------------+-------------------| |stream-format | SPS in-band | SPS in codec_data | |--------------+-------------+-------------------| | avc | maybe | always | |--------------+-------------+-------------------| | avc3 | always | never | |--------------+-------------+-------------------| Amendment 2 of ISO/IEC 14496-15 (AVC file format) is defining a new structure for fragmented MP4 called "avc3". The principal difference between AVC1 and AVC3 is the location of the codec initialisation data (e.g. SPS, PPS). In AVC1 this data is placed in the initial MOOV box (moov.trak.mdia.minf.stbl.stsd.avc1) but in AVC3 this data goes in the first sample of every fragment. https://bugzilla.gnome.org/show_bug.cgi?id=702004
2013-08-30 12:54:40 +00:00
h264_codec_data = h264_avc_codec_data;
h264_codec_data_size = sizeof (h264_avc_codec_data);
ctx_suite = "h264parse_packetized";
/* turn into separate byte stream NALs */
ctx_sink_template = &sinktemplate_bs_nal;
/* and ignore inserted codec-data NALs */
ctx_discard = 2;
ctx_frame_generated = TRUE;
/* no more config headers */
ctx_headers[0].data = NULL;
ctx_headers[1].data = NULL;
ctx_headers[2].data = NULL;
ctx_headers[0].size = 0;
ctx_headers[1].size = 0;
ctx_headers[2].size = 0;
/* and need adapter buffer check */
ctx_verify_buffer = verify_buffer_packetized;
s = h264parse_packetized_suite ();
nf += gst_check_run_suite (s, ctx_suite, __FILE__ "_packetized.c");
ctx_suite = "h264parse_sliced";
s = h264parse_sliced_suite ();
nf += gst_check_run_suite (s, ctx_suite, __FILE__ "_sliced.c");
{
TCase *tc_chain = tcase_create ("general");
s = suite_create ("h264parse");
suite_add_tcase (s, tc_chain);
tcase_add_test (tc_chain, test_parse_sei_closedcaptions);
tcase_add_test (tc_chain, test_parse_compatible_caps);
tcase_add_test (tc_chain, test_parse_skip_to_4bytes_sc);
nf += gst_check_run_suite (s, "h264parse", __FILE__);
}
return nf;
}