gst-plugins-rs/net/webrtc/README.md

296 lines
11 KiB
Markdown
Raw Normal View History

# webrtcsink and webrtcsrc
2021-10-05 21:28:05 +00:00
All-batteries included GStreamer WebRTC producer and consumer, that try their
best to do The Right Thing™.
It also provides a flexible and all-purposes WebRTC signalling server
([gst-webrtc-signalling-server](signalling/src/bin/server.rs)) and a Javascript
API ([gstwebrtc-api](gstwebrtc-api)) to produce and consume compatible WebRTC
streams from a web browser.
2021-10-05 21:28:05 +00:00
## Use case
The [webrtcbin] element in GStreamer is extremely flexible and powerful, but
using it can be a difficult exercise. When all you want to do is serve a fixed
set of streams to any number of consumers, `webrtcsink` (which wraps
`webrtcbin` internally) can be a useful alternative.
2021-10-05 21:28:05 +00:00
[webrtcbin]: https://gstreamer.freedesktop.org/documentation/webrtc/index.html
## Features
`webrtcsink` implements the following features:
* Built-in signaller: when using the default signalling server, this element
will perform signalling without requiring application interaction.
This makes it usable directly from `gst-launch`.
2021-10-05 21:28:05 +00:00
* Application-provided signalling: `webrtcsink` can be instantiated by an
application with a custom signaller. That signaller must be a GObject, and
must implement the `Signallable` interface as defined
[here](src/webrtcsink/mod.rs). The [default signaller](src/signaller/mod.rs)
can be used as an example.
2021-10-05 21:28:05 +00:00
An [example project] is also available to use as a boilerplate for
implementing and using a custom signaller.
* Sandboxed consumers: when a consumer is added, its encoder / payloader /
webrtcbin elements run in a separately managed pipeline. This provides a
certain level of sandboxing, as opposed to having those elements running
inside the element itself.
2021-10-05 21:28:05 +00:00
It is important to note that at this moment, encoding is not shared between
consumers. While this is not on the roadmap at the moment, nothing in the
design prevents implementing this optimization.
2021-10-05 21:28:05 +00:00
* Congestion control: the element leverages transport-wide congestion control
feedback messages in order to adapt the bitrate of individual consumers' video
encoders to the available bandwidth.
* Configuration: the level of user control over the element is slowly expanding,
consult `gst-inspect-1.0` for more information on the available properties and
signals.
2021-10-05 21:28:05 +00:00
* Packet loss mitigation: webrtcsink now supports sending protection packets for
Forward Error Correction, modulating the amount as a function of the available
bandwidth, and can honor retransmission requests. Both features can be
disabled via properties.
2021-10-05 21:28:05 +00:00
It is important to note that full control over the individual elements used by
`webrtcsink` is *not* on the roadmap, as it will act as a black box in that
respect, for example `webrtcsink` wants to reserve control over the bitrate for
congestion control.
2021-10-05 21:28:05 +00:00
A signal is now available however for the application to provide the initial
configuration for the encoders `webrtcsink` instantiates.
If more granular control is required, applications should use `webrtcbin`
directly, `webrtcsink` will focus on trying to just do the right thing, although
it might expose more interfaces to guide and tune the heuristics it employs.
2021-10-05 21:28:05 +00:00
[example project]: https://github.com/centricular/webrtcsink-custom-signaller
2021-10-05 21:28:05 +00:00
## Building
> Make sure to install the development packages for some codec libraries
> beforehand, such as libx264, libvpx and libopusenc, exact names depend
> on your distribution.
``` shell
cargo build
```
## Usage
Open three terminals. In the first one, run the signalling server:
2021-10-05 21:28:05 +00:00
``` shell
WEBRTCSINK_SIGNALLING_SERVER_LOG=debug cargo run --bin gst-webrtc-signalling-server
2021-10-05 21:28:05 +00:00
```
In the second one, run a web browser client (can produce and consume streams):
2021-10-05 21:28:05 +00:00
``` shell
cd gstwebrtc-api
npm install
npm start
2021-10-05 21:28:05 +00:00
```
In the third one, run a webrtcsink producer from a GStreamer pipeline:
2021-10-05 21:28:05 +00:00
``` shell
2021-10-05 21:28:05 +00:00
export GST_PLUGIN_PATH=$PWD/target/debug:$GST_PLUGIN_PATH
gst-launch-1.0 webrtcsink name=ws meta="meta,name=gst-stream" videotestsrc ! ws. audiotestsrc ! ws.
2021-10-05 21:28:05 +00:00
```
The webrtcsink produced stream will appear in the former web page
(automatically opened at https://localhost:9090) under the name "gst-stream",
if you click on it you should see a test video stream and hear a test tone.
You can also produce WebRTC streams from the web browser and consume them with
a GStreamer pipeline. Click on the "Start Capture" button and copy the
"Client ID" value.
Then open a new terminal and run:
2021-10-05 21:28:05 +00:00
``` shell
export GST_PLUGIN_PATH=$PWD/target/debug:$GST_PLUGIN_PATH
gst-launch-1.0 playbin uri=gstwebrtc://127.0.0.1:8443?peer-id=[Client ID]
2021-10-05 21:28:05 +00:00
```
Replacing the "peer-id" value with the previously copied "Client ID" value. You
should see the playbin element opening a window and showing you the content
produced by the web page.
2021-10-05 21:28:05 +00:00
## Configuration
The webrtcsink element itself can be configured through its properties, see
`gst-inspect-1.0 webrtcsink` for more information about that, in addition the
default signaller also exposes properties for configuring it, in
particular setting the signalling server address, those properties
can be accessed through the `gst::ChildProxy` interface, for example
with gst-launch:
``` shell
gst-launch-1.0 webrtcsink signaller::uri="ws://127.0.0.1:8443" ..
```
### Enable 'navigation' a.k.a user interactivity with the content
`webrtcsink` implements the [`GstNavigation`] interface which allows interacting
with the content, for example move with your mouse, entering keys with the
keyboard, etc... On top of that a `WebRTCDataChannel` based protocol has been
implemented and can be activated with the `enable-data-channel-navigation=true`
property allowing a client to send GstNavigation events using the WebRTC data channel.
The [gstwebrtc-api](gstwebrtc-api) and `webrtcsrc` implement the protocol as well
and they can be used as a client to control a remote sever.
You can easily test this feature using the [`wpesrc`] element with the following pipeline
that will start a server that allows you to navigate the GStreamer documentation:
2022-10-20 10:25:32 +00:00
``` shell
gst-launch-1.0 wpesrc location=https://gstreamer.freedesktop.org/documentation/ ! queue ! webrtcsink enable-data-channel-navigation=true meta="meta,name=web-stream"
```
You can control it inside the video running within your web browser (at
https://127.0.0.1:9090 if you followed previous steps in that readme) or
with the following GSteamer pipeline as a client:
``` shell
gst-launch-1.0 webrtcsrc signaller::producer-peer-id=<webrtcsink-peer-id> enable-data-channel-navigation=true ! videoconvert ! autovideosink
```
[`GstNavigation`]: https://gstreamer.freedesktop.org/documentation/video/gstnavigation.html
[`wpesrc`]: https://gstreamer.freedesktop.org/documentation/wpe/wpesrc.html
## Testing congestion control
For the purpose of testing congestion in a reproducible manner, a
[simple tool] has been used, it has been used on Linux exclusively but it is
also documented as usable on MacOS too. Client web browser has to be launched
on a separate machine on the LAN to test for congestion, although specific
configurations may allow to run it on the same machine.
Testing procedure was:
* identify the server machine network interface (e.g. with `ifconfig` on Linux)
* identify the client machine IP address (e.g. with `ifconfig` on Linux)
* start the various services as explained in the Usage section (use
`GST_DEBUG=webrtcsink:7` to get detailed logs about congestion control)
* start playback in the client browser
* Run a `comcast` command on the server machine, for instance:
``` shell
2022-10-20 10:25:32 +00:00
$HOME/go/bin/comcast --device=$SERVER_INTERFACE --target-bw 3000 --target-addr=$CLIENT_IP --target-port=1:65535 --target-proto=udp
```
* Observe the bitrate sharply decreasing, playback should slow down briefly
then catch back up
* Remove the bandwidth limitation, and observe the bitrate eventually increasing
back to a maximum:
``` shell
2022-10-20 10:25:32 +00:00
$HOME/go/bin/comcast --device=$SERVER_INTERFACE --stop
```
For comparison, the congestion control property can be set to "disabled" on
webrtcsink, then the above procedure applied again, the expected result is
for playback to simply crawl down to a halt until the bandwidth limitation
is lifted:
``` shell
gst-launch-1.0 webrtcsink congestion-control=disabled
```
[simple tool]: https://github.com/tylertreat/comcast
## Monitoring tool
An example of client/server application for monitoring per-consumer stats
can be found [here].
2022-10-20 10:25:32 +00:00
[here]: https://gitlab.freedesktop.org/gstreamer/gst-plugins-rs/-/tree/main/net/webrtc/examples
2021-10-05 21:28:05 +00:00
## License
All the rust code in this repository is licensed under the
[Mozilla Public License Version 2.0].
2021-10-05 21:28:05 +00:00
Code in [gstwebrtc-api](gstwebrtc-api) is also licensed under the
[Mozilla Public License Version 2.0].
[Mozilla Public License Version 2.0]: http://opensource.org/licenses/MPL-2.0
## Using the AWS KVS signaller
* Setup AWS Kinesis Video Streams
* Create a channel from the AWS console (<https://us-east-1.console.aws.amazon.com/kinesisvideo/home?region=us-east-1#/signalingChannels/create>)
* Start a producer:
```
AWS_ACCESS_KEY_ID="XXX" AWS_SECRET_ACCESS_KEY="XXX" gst-launch-1.0 videotestsrc pattern=ball ! video/x-raw, width=1280, height=720 ! videoconvert ! textoverlay text="Hello from GStreamer!" ! videoconvert ! awskvswebrtcsink name=ws signaller::channel-name="XXX"
```
* Connect a viewer @ <https://awslabs.github.io/amazon-kinesis-video-streams-webrtc-sdk-js/examples/index.html>
## Using the WHIP Signaller
Testing the whip signaller can be done by setting up janus and
<https://github.com/meetecho/simple-whip-server/>.
* Set up a [janus] instance with the videoroom plugin configured
to expose a room with ID 1234 (configuration in `janus.plugin.videoroom.jcfg`)
* Open the <janus/share/janus/demos/videoroomtest.html> web page, click start
and join the room
* Set up the [simple whip server] as explained in its README
* Navigate to <http://localhost:7080/>, create an endpoint named room1234
pointing to the Janus room with ID 1234
* Finally, send a stream to the endpoint with:
``` shell
gst-launch-1.0 -e uridecodebin uri=file:///home/meh/path/to/video/file ! \
videoconvert ! video/x-raw ! queue ! \
whipwebrtcsink name=ws signaller::whip-endpoint="http://127.0.0.1:7080/whip/endpoint/room1234"
```
You should see a second video displayed in the videoroomtest web page.
## Using the LiveKit Signaller
Testing the LiveKit signaller can be done by setting up [LiveKit] and creating a room.
You can connect either by given the API key and secret:
``` shell
gst-launch-1.0 -e uridecodebin uri=file:///home/meh/path/to/video/file ! \
videoconvert ! video/x-raw ! queue ! \
livekitwebrtcsink signaller::ws-url=ws://127.0.0.1:7880 signaller::api-key=devkey signaller::secret-key=secret signaller::room-name=testroom
```
Or by using a separately created authentication token
``` shell
gst-launch-1.0 -e uridecodebin uri=file:///home/meh/path/to/video/file ! \
videoconvert ! video/x-raw ! queue ! \
livekitwebrtcsink signaller::ws-url=ws://127.0.0.1:7880 signaller::auth-token=mygeneratedtoken signaller::room-name=testroom
```
You should see a second video displayed in the videoroomtest web page.
[LiveKit]: https://livekit.io/
[janus]: https://github.com/meetecho/janus-gateway
[simple whip server]: https://github.com/meetecho/simple-whip-server/