mirror of
https://github.com/superseriousbusiness/gotosocial.git
synced 2024-12-13 10:46:33 +00:00
8696a8cdf0
Bumps [github.com/miekg/dns](https://github.com/miekg/dns) from 1.1.50 to 1.1.51. - [Release notes](https://github.com/miekg/dns/releases) - [Changelog](https://github.com/miekg/dns/blob/master/Makefile.release) - [Commits](https://github.com/miekg/dns/compare/v1.1.50...v1.1.51) --- updated-dependencies: - dependency-name: github.com/miekg/dns dependency-type: direct:production update-type: version-update:semver-patch ... Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
292 lines
10 KiB
Go
292 lines
10 KiB
Go
/*
|
|
Package dns implements a full featured interface to the Domain Name System.
|
|
Both server- and client-side programming is supported. The package allows
|
|
complete control over what is sent out to the DNS. The API follows the
|
|
less-is-more principle, by presenting a small, clean interface.
|
|
|
|
It supports (asynchronous) querying/replying, incoming/outgoing zone transfers,
|
|
TSIG, EDNS0, dynamic updates, notifies and DNSSEC validation/signing.
|
|
|
|
Note that domain names MUST be fully qualified before sending them, unqualified
|
|
names in a message will result in a packing failure.
|
|
|
|
Resource records are native types. They are not stored in wire format. Basic
|
|
usage pattern for creating a new resource record:
|
|
|
|
r := new(dns.MX)
|
|
r.Hdr = dns.RR_Header{Name: "miek.nl.", Rrtype: dns.TypeMX, Class: dns.ClassINET, Ttl: 3600}
|
|
r.Preference = 10
|
|
r.Mx = "mx.miek.nl."
|
|
|
|
Or directly from a string:
|
|
|
|
mx, err := dns.NewRR("miek.nl. 3600 IN MX 10 mx.miek.nl.")
|
|
|
|
Or when the default origin (.) and TTL (3600) and class (IN) suit you:
|
|
|
|
mx, err := dns.NewRR("miek.nl MX 10 mx.miek.nl")
|
|
|
|
Or even:
|
|
|
|
mx, err := dns.NewRR("$ORIGIN nl.\nmiek 1H IN MX 10 mx.miek")
|
|
|
|
In the DNS messages are exchanged, these messages contain resource records
|
|
(sets). Use pattern for creating a message:
|
|
|
|
m := new(dns.Msg)
|
|
m.SetQuestion("miek.nl.", dns.TypeMX)
|
|
|
|
Or when not certain if the domain name is fully qualified:
|
|
|
|
m.SetQuestion(dns.Fqdn("miek.nl"), dns.TypeMX)
|
|
|
|
The message m is now a message with the question section set to ask the MX
|
|
records for the miek.nl. zone.
|
|
|
|
The following is slightly more verbose, but more flexible:
|
|
|
|
m1 := new(dns.Msg)
|
|
m1.Id = dns.Id()
|
|
m1.RecursionDesired = true
|
|
m1.Question = make([]dns.Question, 1)
|
|
m1.Question[0] = dns.Question{"miek.nl.", dns.TypeMX, dns.ClassINET}
|
|
|
|
After creating a message it can be sent. Basic use pattern for synchronous
|
|
querying the DNS at a server configured on 127.0.0.1 and port 53:
|
|
|
|
c := new(dns.Client)
|
|
in, rtt, err := c.Exchange(m1, "127.0.0.1:53")
|
|
|
|
Suppressing multiple outstanding queries (with the same question, type and
|
|
class) is as easy as setting:
|
|
|
|
c.SingleInflight = true
|
|
|
|
More advanced options are available using a net.Dialer and the corresponding API.
|
|
For example it is possible to set a timeout, or to specify a source IP address
|
|
and port to use for the connection:
|
|
|
|
c := new(dns.Client)
|
|
laddr := net.UDPAddr{
|
|
IP: net.ParseIP("[::1]"),
|
|
Port: 12345,
|
|
Zone: "",
|
|
}
|
|
c.Dialer = &net.Dialer{
|
|
Timeout: 200 * time.Millisecond,
|
|
LocalAddr: &laddr,
|
|
}
|
|
in, rtt, err := c.Exchange(m1, "8.8.8.8:53")
|
|
|
|
If these "advanced" features are not needed, a simple UDP query can be sent,
|
|
with:
|
|
|
|
in, err := dns.Exchange(m1, "127.0.0.1:53")
|
|
|
|
When this functions returns you will get DNS message. A DNS message consists
|
|
out of four sections.
|
|
The question section: in.Question, the answer section: in.Answer,
|
|
the authority section: in.Ns and the additional section: in.Extra.
|
|
|
|
Each of these sections (except the Question section) contain a []RR. Basic
|
|
use pattern for accessing the rdata of a TXT RR as the first RR in
|
|
the Answer section:
|
|
|
|
if t, ok := in.Answer[0].(*dns.TXT); ok {
|
|
// do something with t.Txt
|
|
}
|
|
|
|
# Domain Name and TXT Character String Representations
|
|
|
|
Both domain names and TXT character strings are converted to presentation form
|
|
both when unpacked and when converted to strings.
|
|
|
|
For TXT character strings, tabs, carriage returns and line feeds will be
|
|
converted to \t, \r and \n respectively. Back slashes and quotations marks will
|
|
be escaped. Bytes below 32 and above 127 will be converted to \DDD form.
|
|
|
|
For domain names, in addition to the above rules brackets, periods, spaces,
|
|
semicolons and the at symbol are escaped.
|
|
|
|
# DNSSEC
|
|
|
|
DNSSEC (DNS Security Extension) adds a layer of security to the DNS. It uses
|
|
public key cryptography to sign resource records. The public keys are stored in
|
|
DNSKEY records and the signatures in RRSIG records.
|
|
|
|
Requesting DNSSEC information for a zone is done by adding the DO (DNSSEC OK)
|
|
bit to a request.
|
|
|
|
m := new(dns.Msg)
|
|
m.SetEdns0(4096, true)
|
|
|
|
Signature generation, signature verification and key generation are all supported.
|
|
|
|
# DYNAMIC UPDATES
|
|
|
|
Dynamic updates reuses the DNS message format, but renames three of the
|
|
sections. Question is Zone, Answer is Prerequisite, Authority is Update, only
|
|
the Additional is not renamed. See RFC 2136 for the gory details.
|
|
|
|
You can set a rather complex set of rules for the existence of absence of
|
|
certain resource records or names in a zone to specify if resource records
|
|
should be added or removed. The table from RFC 2136 supplemented with the Go
|
|
DNS function shows which functions exist to specify the prerequisites.
|
|
|
|
3.2.4 - Table Of Metavalues Used In Prerequisite Section
|
|
|
|
CLASS TYPE RDATA Meaning Function
|
|
--------------------------------------------------------------
|
|
ANY ANY empty Name is in use dns.NameUsed
|
|
ANY rrset empty RRset exists (value indep) dns.RRsetUsed
|
|
NONE ANY empty Name is not in use dns.NameNotUsed
|
|
NONE rrset empty RRset does not exist dns.RRsetNotUsed
|
|
zone rrset rr RRset exists (value dep) dns.Used
|
|
|
|
The prerequisite section can also be left empty. If you have decided on the
|
|
prerequisites you can tell what RRs should be added or deleted. The next table
|
|
shows the options you have and what functions to call.
|
|
|
|
3.4.2.6 - Table Of Metavalues Used In Update Section
|
|
|
|
CLASS TYPE RDATA Meaning Function
|
|
---------------------------------------------------------------
|
|
ANY ANY empty Delete all RRsets from name dns.RemoveName
|
|
ANY rrset empty Delete an RRset dns.RemoveRRset
|
|
NONE rrset rr Delete an RR from RRset dns.Remove
|
|
zone rrset rr Add to an RRset dns.Insert
|
|
|
|
# TRANSACTION SIGNATURE
|
|
|
|
An TSIG or transaction signature adds a HMAC TSIG record to each message sent.
|
|
The supported algorithms include: HmacSHA1, HmacSHA256 and HmacSHA512.
|
|
|
|
Basic use pattern when querying with a TSIG name "axfr." (note that these key names
|
|
must be fully qualified - as they are domain names) and the base64 secret
|
|
"so6ZGir4GPAqINNh9U5c3A==":
|
|
|
|
If an incoming message contains a TSIG record it MUST be the last record in
|
|
the additional section (RFC2845 3.2). This means that you should make the
|
|
call to SetTsig last, right before executing the query. If you make any
|
|
changes to the RRset after calling SetTsig() the signature will be incorrect.
|
|
|
|
c := new(dns.Client)
|
|
c.TsigSecret = map[string]string{"axfr.": "so6ZGir4GPAqINNh9U5c3A=="}
|
|
m := new(dns.Msg)
|
|
m.SetQuestion("miek.nl.", dns.TypeMX)
|
|
m.SetTsig("axfr.", dns.HmacSHA256, 300, time.Now().Unix())
|
|
...
|
|
// When sending the TSIG RR is calculated and filled in before sending
|
|
|
|
When requesting an zone transfer (almost all TSIG usage is when requesting zone
|
|
transfers), with TSIG, this is the basic use pattern. In this example we
|
|
request an AXFR for miek.nl. with TSIG key named "axfr." and secret
|
|
"so6ZGir4GPAqINNh9U5c3A==" and using the server 176.58.119.54:
|
|
|
|
t := new(dns.Transfer)
|
|
m := new(dns.Msg)
|
|
t.TsigSecret = map[string]string{"axfr.": "so6ZGir4GPAqINNh9U5c3A=="}
|
|
m.SetAxfr("miek.nl.")
|
|
m.SetTsig("axfr.", dns.HmacSHA256, 300, time.Now().Unix())
|
|
c, err := t.In(m, "176.58.119.54:53")
|
|
for r := range c { ... }
|
|
|
|
You can now read the records from the transfer as they come in. Each envelope
|
|
is checked with TSIG. If something is not correct an error is returned.
|
|
|
|
A custom TSIG implementation can be used. This requires additional code to
|
|
perform any session establishment and signature generation/verification. The
|
|
client must be configured with an implementation of the TsigProvider interface:
|
|
|
|
type Provider struct{}
|
|
|
|
func (*Provider) Generate(msg []byte, tsig *dns.TSIG) ([]byte, error) {
|
|
// Use tsig.Hdr.Name and tsig.Algorithm in your code to
|
|
// generate the MAC using msg as the payload.
|
|
}
|
|
|
|
func (*Provider) Verify(msg []byte, tsig *dns.TSIG) error {
|
|
// Use tsig.Hdr.Name and tsig.Algorithm in your code to verify
|
|
// that msg matches the value in tsig.MAC.
|
|
}
|
|
|
|
c := new(dns.Client)
|
|
c.TsigProvider = new(Provider)
|
|
m := new(dns.Msg)
|
|
m.SetQuestion("miek.nl.", dns.TypeMX)
|
|
m.SetTsig(keyname, dns.HmacSHA256, 300, time.Now().Unix())
|
|
...
|
|
// TSIG RR is calculated by calling your Generate method
|
|
|
|
Basic use pattern validating and replying to a message that has TSIG set.
|
|
|
|
server := &dns.Server{Addr: ":53", Net: "udp"}
|
|
server.TsigSecret = map[string]string{"axfr.": "so6ZGir4GPAqINNh9U5c3A=="}
|
|
go server.ListenAndServe()
|
|
dns.HandleFunc(".", handleRequest)
|
|
|
|
func handleRequest(w dns.ResponseWriter, r *dns.Msg) {
|
|
m := new(dns.Msg)
|
|
m.SetReply(r)
|
|
if r.IsTsig() != nil {
|
|
if w.TsigStatus() == nil {
|
|
// *Msg r has an TSIG record and it was validated
|
|
m.SetTsig("axfr.", dns.HmacSHA256, 300, time.Now().Unix())
|
|
} else {
|
|
// *Msg r has an TSIG records and it was not validated
|
|
}
|
|
}
|
|
w.WriteMsg(m)
|
|
}
|
|
|
|
# PRIVATE RRS
|
|
|
|
RFC 6895 sets aside a range of type codes for private use. This range is 65,280
|
|
- 65,534 (0xFF00 - 0xFFFE). When experimenting with new Resource Records these
|
|
can be used, before requesting an official type code from IANA.
|
|
|
|
See https://miek.nl/2014/september/21/idn-and-private-rr-in-go-dns/ for more
|
|
information.
|
|
|
|
# EDNS0
|
|
|
|
EDNS0 is an extension mechanism for the DNS defined in RFC 2671 and updated by
|
|
RFC 6891. It defines a new RR type, the OPT RR, which is then completely
|
|
abused.
|
|
|
|
Basic use pattern for creating an (empty) OPT RR:
|
|
|
|
o := new(dns.OPT)
|
|
o.Hdr.Name = "." // MUST be the root zone, per definition.
|
|
o.Hdr.Rrtype = dns.TypeOPT
|
|
|
|
The rdata of an OPT RR consists out of a slice of EDNS0 (RFC 6891) interfaces.
|
|
Currently only a few have been standardized: EDNS0_NSID (RFC 5001) and
|
|
EDNS0_SUBNET (RFC 7871). Note that these options may be combined in an OPT RR.
|
|
Basic use pattern for a server to check if (and which) options are set:
|
|
|
|
// o is a dns.OPT
|
|
for _, s := range o.Option {
|
|
switch e := s.(type) {
|
|
case *dns.EDNS0_NSID:
|
|
// do stuff with e.Nsid
|
|
case *dns.EDNS0_SUBNET:
|
|
// access e.Family, e.Address, etc.
|
|
}
|
|
}
|
|
|
|
SIG(0)
|
|
|
|
From RFC 2931:
|
|
|
|
SIG(0) provides protection for DNS transactions and requests ....
|
|
... protection for glue records, DNS requests, protection for message headers
|
|
on requests and responses, and protection of the overall integrity of a response.
|
|
|
|
It works like TSIG, except that SIG(0) uses public key cryptography, instead of
|
|
the shared secret approach in TSIG. Supported algorithms: ECDSAP256SHA256,
|
|
ECDSAP384SHA384, RSASHA1, RSASHA256 and RSASHA512.
|
|
|
|
Signing subsequent messages in multi-message sessions is not implemented.
|
|
*/
|
|
package dns
|