mirror of
https://github.com/ferrous-systems/embedded-trainings-2020.git
synced 2024-09-27 14:00:04 +00:00
57 lines
2 KiB
Markdown
57 lines
2 KiB
Markdown
# `cargo-flash` is not working
|
|
|
|
## Debug power request failed
|
|
|
|
``` console
|
|
$ cargo flash --chip nRF52840_xxAA --bin hello
|
|
ERROR probe_rs::architecture::arm::communication_interface > Debug power request failed
|
|
Error processing command: An error specific to the selected architecture occured
|
|
```
|
|
|
|
This is a spurious error that occurs only once on a new development kit. Running the command again should make the error go away. If you still get the error run `RUST_LOG=probe_rs=debug cargo flash --chip nRF52840_xxAA --bin hello ` once.
|
|
|
|
## 'erase_sector' failed with code 1
|
|
|
|
``` console
|
|
$ cargo flash --chip nRF52840_xxAA --bin hello
|
|
(..)
|
|
Error failed to flash app: The execution of 'erase_sector' failed with code 1
|
|
```
|
|
|
|
Ensure that you've installed version 0.10 or higher of `cargo-flash` and `cargo-embed`
|
|
|
|
``` console
|
|
$ cargo flash --version
|
|
0.10.2
|
|
|
|
$ cargo embed --version
|
|
0.10.2
|
|
````
|
|
|
|
## Linux permissions
|
|
|
|
``` console
|
|
$ cargo flash --chip nRF52840_xxAA --bin hello
|
|
Error: An error specific to a probe type occured: USB error while opening USB device: Access denied (insufficient permissions)
|
|
|
|
Caused by:
|
|
USB error while opening USB device: Access denied (insufficient permissions)
|
|
```
|
|
|
|
udev rules need to be changed to allow non-root access. Instructions can be found in the [`Linux only: USB` section of the Installation Instructions].
|
|
|
|
[`Linux only: USB` section of the Installation Instructions]: ./installation.md#linux-only-usb
|
|
|
|
## Wrong Windows Driver
|
|
|
|
``` console
|
|
$ cargo flash --chip nRF52840_xxAA --bin hello
|
|
Error: An error specific to a probe type occured: USB error while opening USB device: Entity not found
|
|
|
|
Caused by:
|
|
USB error while opening USB device: Entity not found
|
|
```
|
|
|
|
You need to bind the BULK interface of the J-Link USB device to the WinUSB driver using the Zadig tool. Instructions can be found in the [`Windows only: Zadig JLink driver` section of the Installation Instructions].
|
|
|
|
[`Windows only: Zadig JLink driver` section of the Installation Instructions]: ./installation.md#windows-only-zadig-jlink-driver
|